i2c: fsl_i2c: Migrate to Kconfig

[platform/kernel/u-boot.git] / include / zynqmp_firmware.h

diff --git a/include/zynqmp_firmware.h b/include/zynqmp_firmware.h
index e2ec8f6..0b068d7 100644 (file)
--- a/include/zynqmp_firmware.h
+++ b/include/zynqmp_firmware.h
@@ -67,6 +67,99 @@ enum pm_api_id {
        PM_API_MAX,
 };
 
+enum pm_node_id {
+       NODE_UNKNOWN = 0,
+       NODE_APU = 1,
+       NODE_APU_0 = 2,
+       NODE_APU_1 = 3,
+       NODE_APU_2 = 4,
+       NODE_APU_3 = 5,
+       NODE_RPU = 6,
+       NODE_RPU_0 = 7,
+       NODE_RPU_1 = 8,
+       NODE_PLD = 9,
+       NODE_FPD = 10,
+       NODE_OCM_BANK_0 = 11,
+       NODE_OCM_BANK_1 = 12,
+       NODE_OCM_BANK_2 = 13,
+       NODE_OCM_BANK_3 = 14,
+       NODE_TCM_0_A = 15,
+       NODE_TCM_0_B = 16,
+       NODE_TCM_1_A = 17,
+       NODE_TCM_1_B = 18,
+       NODE_L2 = 19,
+       NODE_GPU_PP_0 = 20,
+       NODE_GPU_PP_1 = 21,
+       NODE_USB_0 = 22,
+       NODE_USB_1 = 23,
+       NODE_TTC_0 = 24,
+       NODE_TTC_1 = 25,
+       NODE_TTC_2 = 26,
+       NODE_TTC_3 = 27,
+       NODE_SATA = 28,
+       NODE_ETH_0 = 29,
+       NODE_ETH_1 = 30,
+       NODE_ETH_2 = 31,
+       NODE_ETH_3 = 32,
+       NODE_UART_0 = 33,
+       NODE_UART_1 = 34,
+       NODE_SPI_0 = 35,
+       NODE_SPI_1 = 36,
+       NODE_I2C_0 = 37,
+       NODE_I2C_1 = 38,
+       NODE_SD_0 = 39,
+       NODE_SD_1 = 40,
+       NODE_DP = 41,
+       NODE_GDMA = 42,
+       NODE_ADMA = 43,
+       NODE_NAND = 44,
+       NODE_QSPI = 45,
+       NODE_GPIO = 46,
+       NODE_CAN_0 = 47,
+       NODE_CAN_1 = 48,
+       NODE_EXTERN = 49,
+       NODE_APLL = 50,
+       NODE_VPLL = 51,
+       NODE_DPLL = 52,
+       NODE_RPLL = 53,
+       NODE_IOPLL = 54,
+       NODE_DDR = 55,
+       NODE_IPI_APU = 56,
+       NODE_IPI_RPU_0 = 57,
+       NODE_GPU = 58,
+       NODE_PCIE = 59,
+       NODE_PCAP = 60,
+       NODE_RTC = 61,
+       NODE_LPD = 62,
+       NODE_VCU = 63,
+       NODE_IPI_RPU_1 = 64,
+       NODE_IPI_PL_0 = 65,
+       NODE_IPI_PL_1 = 66,
+       NODE_IPI_PL_2 = 67,
+       NODE_IPI_PL_3 = 68,
+       NODE_PL = 69,
+       NODE_GEM_TSU = 70,
+       NODE_SWDT_0 = 71,
+       NODE_SWDT_1 = 72,
+       NODE_CSU = 73,
+       NODE_PJTAG = 74,
+       NODE_TRACE = 75,
+       NODE_TESTSCAN = 76,
+       NODE_PMU = 77,
+       NODE_MAX = 78,
+};
+
+enum tap_delay_type {
+       PM_TAPDELAY_INPUT = 0,
+       PM_TAPDELAY_OUTPUT = 1,
+};
+
+enum dll_reset_type {
+       PM_DLL_RESET_ASSERT = 0,
+       PM_DLL_RESET_RELEASE = 1,
+       PM_DLL_RESET_PULSE = 2,
+};
+
 enum pm_query_id {
        PM_QID_INVALID = 0,
        PM_QID_CLOCK_GET_NAME = 1,
@@ -215,6 +308,40 @@ enum zynqmp_pm_reset {
        ZYNQMP_PM_RESET_END = ZYNQMP_PM_RESET_PS_PL3
 };
 
+enum pm_ioctl_id {
+       IOCTL_GET_RPU_OPER_MODE = 0,
+       IOCTL_SET_RPU_OPER_MODE = 1,
+       IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
+       IOCTL_TCM_COMB_CONFIG = 3,
+       IOCTL_SET_TAPDELAY_BYPASS = 4,
+       IOCTL_SET_SGMII_MODE = 5,
+       IOCTL_SD_DLL_RESET = 6,
+       IOCTL_SET_SD_TAPDELAY = 7,
+       IOCTL_SET_PLL_FRAC_MODE = 8,
+       IOCTL_GET_PLL_FRAC_MODE = 9,
+       IOCTL_SET_PLL_FRAC_DATA = 10,
+       IOCTL_GET_PLL_FRAC_DATA = 11,
+       IOCTL_WRITE_GGS = 12,
+       IOCTL_READ_GGS = 13,
+       IOCTL_WRITE_PGGS = 14,
+       IOCTL_READ_PGGS = 15,
+       /* IOCTL for ULPI reset */
+       IOCTL_ULPI_RESET = 16,
+       /* Set healthy bit value*/
+       IOCTL_SET_BOOT_HEALTH_STATUS = 17,
+       IOCTL_AFI = 18,
+       /* Probe counter read/write */
+       IOCTL_PROBE_COUNTER_READ = 19,
+       IOCTL_PROBE_COUNTER_WRITE = 20,
+       IOCTL_OSPI_MUX_SELECT = 21,
+       /* IOCTL for USB power request */
+       IOCTL_USB_SET_STATE = 22,
+       /* IOCTL to get last reset reason */
+       IOCTL_GET_LAST_RESET_REASON = 23,
+       /* AIE ISR Clear */
+       IOCTL_AIE_ISR_CLEAR = 24,
+};
+
 #define PM_SIP_SVC      0xc2000000
 
 #define ZYNQMP_PM_VERSION_MAJOR         1