+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2000-2009
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __VSPRINTF_H
#define __VSPRINTF_H
+#include <stdarg.h>
+#include <linux/types.h>
+
+/**
+ * simple_strtoul - convert a string to an unsigned long
+ *
+ * @param cp The string to be converted
+ * @param endp Updated to point to the first character not converted
+ * @param base The number base to use (0 for the default)
+ * @return value decoded from string (0 if invalid)
+ *
+ * Converts a string to an unsigned long. If there are invalid characters at
+ * the end these are ignored. In the worst case, if all characters are invalid,
+ * 0 is returned
+ *
+ * A hex prefix is supported (e.g. 0x123) regardless of the value of @base.
+ * If found, the base is set to hex (16).
+ *
+ * If @base is 0:
+ * - an octal '0' prefix (e.g. 0777) sets the base to octal (8).
+ * - otherwise the base defaults to decimal (10).
+ */
ulong simple_strtoul(const char *cp, char **endp, unsigned int base);
/**
+ * hex_strtoul - convert a string in hex to an unsigned long
+ *
+ * @param cp The string to be converted
+ * @param endp Updated to point to the first character not converted
+ * @return value decoded from string (0 if invalid)
+ *
+ * Converts a hex string to an unsigned long. If there are invalid characters at
+ * the end these are ignored. In the worst case, if all characters are invalid,
+ * 0 is returned
+ */
+unsigned long hextoul(const char *cp, char **endp);
+
+/**
+ * dec_strtoul - convert a string in decimal to an unsigned long
+ *
+ * @param cp The string to be converted
+ * @param endp Updated to point to the first character not converted
+ * @return value decoded from string (0 if invalid)
+ *
+ * Converts a decimal string to an unsigned long. If there are invalid
+ * characters at the end these are ignored. In the worst case, if all characters
+ * are invalid, 0 is returned
+ */
+unsigned long dectoul(const char *cp, char **endp);
+
+/**
* strict_strtoul - convert a string to an unsigned long strictly
* @param cp The string to be converted
- * @param base The number base to use
+ * @param base The number base to use (0 for the default)
* @param res The converted result value
* @return 0 if conversion is successful and *res is set to the converted
* value, otherwise it returns -EINVAL and *res is set to 0.
*
* echo will append a newline to the tail.
*
- * simple_strtoul just ignores the successive invalid characters and
- * return the converted value of prefix part of the string.
+ * A hex prefix is supported (e.g. 0x123) regardless of the value of @base.
+ * If found, the base is set to hex (16).
+ *
+ * If @base is 0:
+ * - an octal '0' prefix (e.g. 0777) sets the base to octal (8).
+ * - otherwise the base defaults to decimal (10).
*
* Copied this function from Linux 2.6.38 commit ID:
* 521cb40b0c44418a4fd36dc633f575813d59a43d
unsigned long long simple_strtoull(const char *cp, char **endp,
unsigned int base);
long simple_strtol(const char *cp, char **endp, unsigned int base);
+long long simple_strtoll(const char *cp, char **endp, unsigned int base);
+
+/**
+ * trailing_strtol() - extract a trailing integer from a string
+ *
+ * Given a string this finds a trailing number on the string and returns it.
+ * For example, "abc123" would return 123.
+ *
+ * @str: String to exxamine
+ * @return training number if found, else -1
+ */
+long trailing_strtol(const char *str);
+
+/**
+ * trailing_strtoln() - extract a trailing integer from a fixed-length string
+ *
+ * Given a fixed-length string this finds a trailing number on the string
+ * and returns it. For example, "abc123" would return 123. Only the
+ * characters between @str and @end - 1 are examined. If @end is NULL, it is
+ * set to str + strlen(str).
+ *
+ * @str: String to exxamine
+ * @end: Pointer to end of string to examine, or NULL to use the
+ * whole string
+ * @return training number if found, else -1
+ */
+long trailing_strtoln(const char *str, const char *end);
+
+/**
+ * panic() - Print a message and reset/hang
+ *
+ * Prints a message on the console(s) and then resets. If CONFIG_PANIC_HANG is
+ * defined, then it will hang instead of resetting.
+ *
+ * @param fmt: printf() format string for message, which should not include
+ * \n, followed by arguments
+ */
void panic(const char *fmt, ...)
__attribute__ ((format (__printf__, 1, 2), noreturn));
/**
+ * panic_str() - Print a message and reset/hang
+ *
+ * Prints a message on the console(s) and then resets. If CONFIG_PANIC_HANG is
+ * defined, then it will hang instead of resetting.
+ *
+ * This function can be used instead of panic() when your board does not
+ * already use printf(), * to keep code size small.
+ *
+ * @param fmt: string to display, which should not include \n
+ */
+void panic_str(const char *str) __attribute__ ((noreturn));
+
+/**
* Format a string and place it in a buffer
*
* @param buf The buffer to place the result into
* Format a string and place it in a buffer (va_list version)
*
* @param buf The buffer to place the result into
- * @param size The size of the buffer, including the trailing null space
* @param fmt The format string to use
* @param args Arguments for the format string
* @return the number of characters which have been written into
- * the @buf not including the trailing '\0'. If @size is == 0 the function
- * returns 0.
+ * the @buf not including the trailing '\0'.
*
* If you're not already dealing with a va_list consider using scnprintf().
*
int vsprintf(char *buf, const char *fmt, va_list args);
char *simple_itoa(ulong i);
-#ifdef CONFIG_SYS_VSNPRINTF
/**
* Format a string and place it in a buffer
*
* See the vsprintf() documentation for format string extensions over C99.
*/
int vscnprintf(char *buf, size_t size, const char *fmt, va_list args);
-#else
-/*
- * Use macros to silently drop the size parameter. Note that the 'cn'
- * versions are the same as the 'n' versions since the functions assume
- * there is always enough buffer space when !CONFIG_SYS_VSNPRINTF
- */
-#define snprintf(buf, size, fmt, args...) sprintf(buf, fmt, ##args)
-#define scnprintf(buf, size, fmt, args...) sprintf(buf, fmt, ##args)
-#define vsnprintf(buf, size, fmt, args...) vsprintf(buf, fmt, ##args)
-#define vscnprintf(buf, size, fmt, args...) vsprintf(buf, fmt, ##args)
-#endif /* CONFIG_SYS_VSNPRINTF */
/**
* print_grouped_ull() - print a value with digits grouped by ','
*/
void print_grouped_ull(unsigned long long int_val, int digits);
+bool str2off(const char *p, loff_t *num);
+bool str2long(const char *p, ulong *num);
+
+/**
+ * strmhz() - Convert a value to a Hz string
+ *
+ * This creates a string indicating the number of MHz of a value. For example,
+ * 2700000 produces "2.7".
+ * @buf: Buffer to hold output string, which must be large enough
+ * @hz: Value to convert
+ */
+char *strmhz(char *buf, unsigned long hz);
+
+/**
+ * str_to_upper() - Convert a string to upper case
+ *
+ * This simply uses toupper() on each character of the string.
+ *
+ * @in: String to convert (must be large enough to hold the output string)
+ * @out: Buffer to put converted string
+ * @len: Number of bytes available in @out (SIZE_MAX for all)
+ */
+void str_to_upper(const char *in, char *out, size_t len);
+
+/**
+ * sscanf - Unformat a buffer into a list of arguments
+ * @buf: input buffer
+ * @fmt: formatting of buffer
+ * @...: resulting arguments
+ */
+int sscanf(const char *buf, const char *fmt, ...);
+
#endif
projects / platform / kernel / u-boot.git / blobdiff