struct blk_desc;
struct image_header;
+struct spl_boot_device;
/*
* u_boot_first_phase() - check if this is the first U-Boot phase
* ...
* }
*
- * @return U-Boot phase
+ * Return: U-Boot phase
*/
static inline enum u_boot_phase spl_phase(void)
{
/**
* spl_prev_phase() - Figure out the previous U-Boot phase
*
- * @return the previous phase from this one, e.g. if called in SPL this returns
+ * Return: the previous phase from this one, e.g. if called in SPL this returns
* PHASE_TPL, if TPL is enabled
*/
static inline enum u_boot_phase spl_prev_phase(void)
/**
* spl_next_phase() - Figure out the next U-Boot phase
*
- * @return the next phase from this one, e.g. if called in TPL this returns
+ * Return: the next phase from this one, e.g. if called in TPL this returns
* PHASE_SPL
*/
static inline enum u_boot_phase spl_next_phase(void)
/**
* spl_phase_name() - Get the name of the current phase
*
- * @return phase name
+ * Return: phase name
*/
static inline const char *spl_phase_name(enum u_boot_phase phase)
{
* spl_phase_prefix() - Get the prefix of the current phase
*
* @phase: Phase to look up
- * @return phase prefix ("spl", "tpl", etc.)
+ * Return: phase prefix ("spl", "tpl", etc.)
*/
static inline const char *spl_phase_prefix(enum u_boot_phase phase)
{
*/
binman_sym_extern(ulong, u_boot_any, image_pos);
binman_sym_extern(ulong, u_boot_any, size);
-binman_sym_extern(ulong, spl, image_pos);
-binman_sym_extern(ulong, spl, size);
+binman_sym_extern(ulong, u_boot_spl, image_pos);
+binman_sym_extern(ulong, u_boot_spl, size);
/**
* spl_get_image_pos() - get the image position of the next phase
* This returns the address that the next stage is linked to run at, i.e.
* CONFIG_SPL_TEXT_BASE or CONFIG_SYS_TEXT_BASE
*
- * @return text-base address
+ * Return: text-base address
*/
ulong spl_get_image_text_base(void);
bool spl_load_simple_fit_skip_processing(void);
/**
+ * spl_load_simple_fit_fix_load() - Hook to make fixes
+ * after fit image header is loaded
+ *
+ * Returns pointer to fit
+ */
+void *spl_load_simple_fit_fix_load(const void *fit);
+
+/**
* spl_load_simple_fit() - Loads a fit image from a device.
* @spl_image: Image description to set up
* @info: Structure containing the information required to load data.
* Returns 0 on success.
*/
int spl_load_legacy_img(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev,
struct spl_load_info *load, ulong header);
/**
*
* @spl_image: Image description to set up
* @header image header to parse
- * @return 0 if a header was correctly parsed, -ve on error
+ * Return: 0 if a header was correctly parsed, -ve on error
*/
int spl_parse_image_header(struct spl_image_info *spl_image,
+ const struct spl_boot_device *bootdev,
const struct image_header *header);
void spl_board_prepare_for_linux(void);
int spl_board_boot_device(u32 boot_device);
/**
+ * spl_board_loader_name() - Return a name for the loader
+ *
+ * This is a weak function which might be overridden by the board code. With
+ * that a board specific value for the device where the U-Boot will be loaded
+ * from can be set. By default it returns NULL.
+ *
+ * @boot_device: ID of the device which SPL wants to load U-Boot from.
+ */
+const char *spl_board_loader_name(u32 boot_device);
+
+/**
* jump_to_image_linux() - Jump to a Linux kernel from SPL
*
* This jumps into a Linux kernel using the information in @spl_image.
void __noreturn jump_to_image_linux(struct spl_image_info *spl_image);
/**
+ * jump_to_image_linux() - Jump to OP-TEE OS from SPL
+ *
+ * This jumps into OP-TEE OS using the information in @spl_image.
+ *
+ * @spl_image: Image description to set up
+ */
+void __noreturn jump_to_image_optee(struct spl_image_info *spl_image);
+
+/**
* spl_start_uboot() - Check if SPL should start the kernel or U-Boot
*
* This is called by the various SPL loaders to determine whether the board
* wants to load the kernel or U-Boot. This function should be provided by
* the board.
*
- * @return 0 if SPL should start the kernel, 1 if U-Boot must be started
+ * Return: 0 if SPL should start the kernel, 1 if U-Boot must be started
*/
int spl_start_uboot(void);
static inline const char *spl_loader_name(const struct spl_image_loader *loader)
{
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
- return loader->name;
+ const char *name;
+ name = spl_board_loader_name(loader->boot_device);
+ return name ?: loader->name;
#else
return NULL;
#endif
/* SPL FAT image functions */
int spl_load_image_fat(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev,
struct blk_desc *block_dev, int partition,
const char *filename);
int spl_load_image_fat_os(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev,
struct blk_desc *block_dev, int partition);
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image);
/* SPL EXT image functions */
int spl_load_image_ext(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev,
struct blk_desc *block_dev, int partition,
const char *filename);
int spl_load_image_ext_os(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev,
struct blk_desc *block_dev, int partition);
/**
* This will normally be true, but if U-Boot jumps to second U-Boot, it will
* be false. This should be implemented by board-specific code.
*
- * @return true if U-Boot booted from SPL, else false
+ * Return: true if U-Boot booted from SPL, else false
*/
bool spl_was_boot_source(void);
* @param usb_index - usb controller number
* @param mmc_dev - mmc device nubmer
*
- * @return 0 on success, otherwise error code
+ * Return: 0 on success, otherwise error code
*/
int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr);
* @param raw_part Partition to load from (in RAW mode)
* @param raw_sect Sector to load from (in RAW mode)
*
- * @return 0 on success, otherwise error code
+ * Return: 0 on success, otherwise error code
*/
int spl_mmc_load(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev,
* @param raw_part Fat partition to load from
* @param filename Name of file to load
*
- * @return 0 on success, otherwise error code
+ * Return: 0 on success, otherwise error code
*/
int spl_usb_load(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev,
* @arg2: device tree address, (ARMv7 standard bootarg #2)
* @arg3: non-secure entry address (ARMv7 bootarg #0)
*/
-void spl_optee_entry(void *arg0, void *arg1, void *arg2, void *arg3);
+void __noreturn spl_optee_entry(void *arg0, void *arg1, void *arg2, void *arg3);
/**
* spl_invoke_opensbi - boot using a RISC-V OpenSBI image
projects / platform / kernel / u-boot.git / blobdiff