/*
- * Interface to SPI flash
+ * Common SPI flash Interface
*
* Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
+ * version 2 as published by the Free Software Foundation.
*/
+
#ifndef _SPI_FLASH_H_
#define _SPI_FLASH_H_
#include <linux/types.h>
#include <linux/compiler.h>
-struct spi_flash {
- struct spi_slave *spi;
+/* sf param flags */
+#define SECT_4K 1 << 1
+#define SECT_32K 1 << 2
+#define E_FSR 1 << 3
+#define WR_QPP 1 << 4
- const char *name;
+/* Enum list - Full read commands */
+enum spi_read_cmds {
+ ARRAY_SLOW = 1 << 0,
+ DUAL_OUTPUT_FAST = 1 << 1,
+ DUAL_IO_FAST = 1 << 2,
+ QUAD_OUTPUT_FAST = 1 << 3,
+ QUAD_IO_FAST = 1 << 4,
+};
+#define RD_EXTN ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST
+#define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST
- /* Total flash size */
- u32 size;
- /* Write (page) size */
- u32 page_size;
- /* Erase (sector) size */
- u32 sector_size;
-#ifdef CONFIG_SPI_FLASH_BAR
- /* Bank read cmd */
- u8 bank_read_cmd;
- /* Bank write cmd */
- u8 bank_write_cmd;
- /* Current flash bank */
- u8 bank_curr;
-#endif
- /* Poll cmd - for flash erase/program */
- u8 poll_cmd;
-
- void *memory_map; /* Address of read-only SPI flash access */
- int (*read)(struct spi_flash *flash, u32 offset,
- size_t len, void *buf);
- int (*write)(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf);
- int (*erase)(struct spi_flash *flash, u32 offset,
- size_t len);
+/* Dual SPI flash memories */
+enum spi_dual_flash {
+ SF_SINGLE_FLASH = 0,
+ SF_DUAL_STACKED_FLASH = 1 << 0,
+ SF_DUAL_PARALLEL_FLASH = 1 << 1,
};
/**
- * spi_flash_do_alloc - Allocate a new spi flash structure
+ * struct spi_flash_params - SPI/QSPI flash device params structure
*
- * The structure is allocated and cleared with default values for
- * read, write and erase, which the caller can modify. The caller must set
- * up size, page_size and sector_size.
- *
- * Use the helper macro spi_flash_alloc() to call this.
- *
- * @offset: Offset of struct spi_slave within slave structure
- * @size: Size of slave structure
- * @spi: SPI slave
- * @name: Name of SPI flash device
+ * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
+ * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
+ * @ext_jedec: Device ext_jedec ID
+ * @sector_size: Sector size of this device
+ * @nr_sectors: No.of sectors on this device
+ * @e_rd_cmd: Enum list for read commands
+ * @flags: Importent param, for flash specific behaviour
*/
-void *spi_flash_do_alloc(int offset, int size, struct spi_slave *spi,
- const char *name);
+struct spi_flash_params {
+ const char *name;
+ u32 jedec;
+ u16 ext_jedec;
+ u32 sector_size;
+ u32 nr_sectors;
+ u8 e_rd_cmd;
+ u16 flags;
+};
+
+extern const struct spi_flash_params spi_flash_params_table[];
/**
- * spi_flash_alloc - Allocate a new SPI flash structure
+ * struct spi_flash - SPI flash structure
*
- * @_struct: Name of structure to allocate (e.g. struct ramtron_spi_fram). This
- * structure must contain a member 'struct spi_flash *flash'.
- * @spi: SPI slave
- * @name: Name of SPI flash device
+ * @spi: SPI slave
+ * @name: Name of SPI flash
+ * @dual_flash: Indicates dual flash memories - dual stacked, parallel
+ * @shift: Flash shift useful in dual parallel
+ * @size: Total flash size
+ * @page_size: Write (page) size
+ * @sector_size: Sector size
+ * @erase_size: Erase size
+ * @bank_read_cmd: Bank read cmd
+ * @bank_write_cmd: Bank write cmd
+ * @bank_curr: Current flash bank
+ * @poll_cmd: Poll cmd - for flash erase/program
+ * @erase_cmd: Erase cmd 4K, 32K, 64K
+ * @read_cmd: Read cmd - Array Fast, Extn read and quad read.
+ * @write_cmd: Write cmd - page and quad program.
+ * @dummy_byte: Dummy cycles for read operation.
+ * @memory_map: Address of read-only SPI flash access
+ * @read: Flash read ops: Read len bytes at offset into buf
+ * Supported cmds: Fast Array Read
+ * @write: Flash write ops: Write len bytes from buf into offeset
+ * Supported cmds: Page Program
+ * @erase: Flash erase ops: Erase len bytes from offset
+ * Supported cmds: Sector erase 4K, 32K, 64K
+ * return 0 - Sucess, 1 - Failure
*/
-#define spi_flash_alloc(_struct, spi, name) \
- spi_flash_do_alloc(offsetof(_struct, flash), sizeof(_struct), \
- spi, name)
+struct spi_flash {
+ struct spi_slave *spi;
+ const char *name;
+ u8 dual_flash;
+ u8 shift;
+
+ u32 size;
+ u32 page_size;
+ u32 sector_size;
+ u32 erase_size;
+#ifdef CONFIG_SPI_FLASH_BAR
+ u8 bank_read_cmd;
+ u8 bank_write_cmd;
+ u8 bank_curr;
+#endif
+ u8 poll_cmd;
+ u8 erase_cmd;
+ u8 read_cmd;
+ u8 write_cmd;
+ u8 dummy_byte;
+
+ void *memory_map;
+ int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);
+ int (*write)(struct spi_flash *flash, u32 offset, size_t len,
+ const void *buf);
+ int (*erase)(struct spi_flash *flash, u32 offset, size_t len);
+};
+
+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode);
/**
- * spi_flash_alloc_base - Allocate a new SPI flash structure with no private data
+ * Set up a new SPI flash from an fdt node
*
- * @spi: SPI slave
- * @name: Name of SPI flash device
+ * @param blob Device tree blob
+ * @param slave_node Pointer to this SPI slave node in the device tree
+ * @param spi_node Cached pointer to the SPI interface this node belongs
+ * to
+ * @return 0 if ok, -1 on error
*/
-#define spi_flash_alloc_base(spi, name) \
- spi_flash_do_alloc(0, sizeof(struct spi_flash), spi, name)
+struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
+ int spi_node);
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode);
void spi_flash_free(struct spi_flash *flash);
static inline int spi_flash_read(struct spi_flash *flash, u32 offset,