#define _SPI_H_
#include <common.h>
+#include <linux/bitops.h>
/* SPI mode flags */
-#define SPI_CPHA BIT(0) /* clock phase */
-#define SPI_CPOL BIT(1) /* clock polarity */
+#define SPI_CPHA BIT(0) /* clock phase (1 = SPI_CLOCK_PHASE_SECOND) */
+#define SPI_CPOL BIT(1) /* clock polarity (1 = SPI_POLARITY_HIGH) */
#define SPI_MODE_0 (0|0) /* (original MicroWire) */
#define SPI_MODE_1 (0|SPI_CPHA)
#define SPI_MODE_2 (SPI_CPOL|0)
#define SPI_DEFAULT_WORDLEN 8
-#ifdef CONFIG_DM_SPI
-/* TODO(sjg@chromium.org): Remove this and use max_hz from struct spi_slave */
+/**
+ * struct dm_spi_bus - SPI bus info
+ *
+ * This contains information about a SPI bus. To obtain this structure, use
+ * dev_get_uclass_priv(bus) where bus is the SPI bus udevice.
+ *
+ * @max_hz: Maximum speed that the bus can tolerate.
+ * @speed: Current bus speed. This is 0 until the bus is first claimed.
+ * @mode: Current bus mode. This is 0 until the bus is first claimed.
+ *
+ * TODO(sjg@chromium.org): Remove this and use max_hz from struct spi_slave.
+ */
struct dm_spi_bus {
uint max_hz;
+ uint speed;
+ uint mode;
};
/**
- * struct dm_spi_platdata - platform data for all SPI slaves
+ * struct dm_spi_plat - platform data for all SPI slaves
*
* This describes a SPI slave, a child device of the SPI bus. To obtain this
- * struct from a spi_slave, use dev_get_parent_platdata(dev) or
- * dev_get_parent_platdata(slave->dev).
+ * struct from a spi_slave, use dev_get_parent_plat(dev) or
+ * dev_get_parent_plat(slave->dev).
*
- * This data is immuatable. Each time the device is probed, @max_hz and @mode
+ * This data is immutable. Each time the device is probed, @max_hz and @mode
* will be copied to struct spi_slave.
*
* @cs: Chip select number (0..n-1)
* @max_hz: Maximum bus speed that this slave can tolerate
* @mode: SPI mode to use for this device (see SPI mode flags)
*/
-struct dm_spi_slave_platdata {
+struct dm_spi_slave_plat {
unsigned int cs;
uint max_hz;
uint mode;
};
-#endif /* CONFIG_DM_SPI */
-
/**
* enum spi_clock_phase - indicates the clock phase to use for SPI (CPHA)
*
*
* For driver model this is the per-child data used by the SPI bus. It can
* be accessed using dev_get_parent_priv() on the slave device. The SPI uclass
- * sets uip per_child_auto_alloc_size to sizeof(struct spi_slave), and the
+ * sets up per_child_auto to sizeof(struct spi_slave), and the
* driver should not override it. Two platform data fields (max_hz and mode)
* are copied into this structure to provide an initial value. This allows
* them to be changed, since we should never change platform data in drivers.
*
* @dev: SPI slave device
* @max_hz: Maximum speed for this slave
- * @speed: Current bus speed. This is 0 until the bus is first
- * claimed.
* @bus: ID of the bus that the slave is attached to. For
* driver model this is the sequence number of the SPI
- * bus (bus->seq) so does not need to be stored
+ * bus (dev_seq(bus)) so does not need to be stored
* @cs: ID of the chip select connected to the slave.
* @mode: SPI mode to use for this slave (see SPI mode flags)
* @wordlen: Size of SPI word in number of bits
* @flags: Indication of SPI flags.
*/
struct spi_slave {
-#ifdef CONFIG_DM_SPI
+#if CONFIG_IS_ENABLED(DM_SPI)
struct udevice *dev; /* struct spi_slave is dev->parentdata */
uint max_hz;
- uint speed;
#else
unsigned int bus;
unsigned int cs;
#define SPI_XFER_BEGIN BIT(0) /* Assert CS before transfer */
#define SPI_XFER_END BIT(1) /* Deassert CS after transfer */
#define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END)
-#define SPI_XFER_MMAP BIT(2) /* Memory Mapped start */
-#define SPI_XFER_MMAP_END BIT(3) /* Memory Mapped End */
};
/**
*/
int spi_cs_is_valid(unsigned int bus, unsigned int cs);
-#ifndef CONFIG_DM_SPI
+/*
+ * These names are used in several drivers and these declarations will be
+ * removed soon as part of the SPI DM migration. Drop them if driver model is
+ * enabled for SPI.
+ */
+#if !CONFIG_IS_ENABLED(DM_SPI)
/**
* Activate a SPI chipselect.
* This function is provided by the board code when using a driver
* select to the device identified by "slave".
*/
void spi_cs_deactivate(struct spi_slave *slave);
+#endif
/**
* Set transfer speed.
* @hz: The transfer speed
*/
void spi_set_speed(struct spi_slave *slave, uint hz);
-#endif
/**
* Write 8 bits, then read 8 bits.
return ret < 0 ? ret : din[1];
}
-#ifdef CONFIG_DM_SPI
-
/**
* struct spi_cs_info - Information about a bus chip select
*
* @cs: Chip select to look for
* @busp: Returns bus device
* @devp: Return slave device
- * @return 0 if found, -ENODEV on error
+ * Return: 0 if found, -ENODEV on error
*/
int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp,
struct udevice **devp);
* Given a bus number and chip select, this finds the corresponding bus
* device and slave device.
*
+ * @busnum: SPI bus number
+ * @cs: Chip select to look for
+ * @busp: Returns bus device
+ * @devp: Return slave device
+ * @return 0 if found, -ve on error
+ */
+int spi_get_bus_and_cs(int busnum, int cs,
+ struct udevice **busp, struct spi_slave **devp);
+
+/**
+ * _spi_get_bus_and_cs() - Find and activate bus and slave devices by number
+ * As spi_flash_probe(), This is an old-style function. We should remove
+ * it when all SPI flash drivers use dm
+ *
+ * Given a bus number and chip select, this finds the corresponding bus
+ * device and slave device.
+ *
* If no such slave exists, and drv_name is not NULL, then a new slave device
* is automatically bound on this chip select with requested speed and mode.
*
* Ths new slave device is probed ready for use with the speed and mode
- * from platdata when available or the requested values.
+ * from plat when available or the requested values.
*
* @busnum: SPI bus number
* @cs: Chip select to look for
- * @speed: SPI speed to use for this slave when not available in platdata
- * @mode: SPI mode to use for this slave when not available in platdata
+ * @speed: SPI speed to use for this slave when not available in plat
+ * @mode: SPI mode to use for this slave when not available in plat
* @drv_name: Name of driver to attach to this chip select
* @dev_name: Name of the new device thus created
* @busp: Returns bus device
* @devp: Return slave device
- * @return 0 if found, -ve on error
+ * Return: 0 if found, -ve on error
*/
-int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
+int _spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
const char *drv_name, const char *dev_name,
struct udevice **busp, struct spi_slave **devp);
/**
* spi_chip_select() - Get the chip select for a slave
*
- * @return the chip select this slave is attached to
+ * Return: the chip select this slave is attached to
*/
int spi_chip_select(struct udevice *slave);
* @bus: SPI bus to search
* @cs: Chip select to look for
* @devp: Returns the slave device if found
- * @return 0 if found, -EINVAL if cs is invalid, -ENODEV if no device attached,
+ * Return: 0 if found, -EINVAL if cs is invalid, -ENODEV if no device attached,
* other -ve value on error
*/
int spi_find_chip_select(struct udevice *bus, int cs, struct udevice **devp);
/**
- * spi_slave_ofdata_to_platdata() - decode standard SPI platform data
+ * spi_slave_of_to_plat() - decode standard SPI platform data
*
* This decodes the speed and mode for a slave from a device tree node
*
* @node: Node offset to read from
* @plat: Place to put the decoded information
*/
-int spi_slave_ofdata_to_platdata(struct udevice *dev,
- struct dm_spi_slave_platdata *plat);
+int spi_slave_of_to_plat(struct udevice *dev, struct dm_spi_slave_plat *plat);
/**
* spi_cs_info() - Check information on a chip select
* @bus: The SPI bus
* @cs: The chip select (0..n-1)
* @info: Returns information about the chip select, if valid
- * @return 0 if OK (and @info is set up), -ENODEV if the chip select
+ * Return: 0 if OK (and @info is set up), -ENODEV if the chip select
* is invalid, other -ve value on error
*/
int spi_cs_info(struct udevice *bus, uint cs, struct spi_cs_info *info);
* @bus: SPI bus requesting the emulator
* @slave: SPI slave device requesting the emulator
* @emuip: Returns pointer to emulator
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
*/
int sandbox_spi_get_emul(struct sandbox_state *state,
struct udevice *bus, struct udevice *slave,
* @map_sizep: Returns size of mapped SPI
* @offsetp: Returns start offset of SPI flash where the map works
* correctly (offsets before this are not visible)
- * @return 0 if OK, -ENOSYS if no operation, -EFAULT if memory mapping is not
+ * Return: 0 if OK, -ENOSYS if no operation, -EFAULT if memory mapping is not
* available
*/
int dm_spi_get_mmap(struct udevice *dev, ulong *map_basep, uint *map_sizep,
/* Access the operations for a SPI device */
#define spi_get_ops(dev) ((struct dm_spi_ops *)(dev)->driver->ops)
#define spi_emul_get_ops(dev) ((struct dm_spi_emul_ops *)(dev)->driver->ops)
-#endif /* CONFIG_DM_SPI */
#endif /* _SPI_H_ */