{ \
.buswidth = __buswidth, \
.opcode = __opcode, \
+ .nbytes = 1, \
}
#define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth) \
/**
* struct spi_mem_op - describes a SPI memory operation
+ * @cmd.nbytes: number of opcode bytes (only 1 or 2 are valid). The opcode is
+ * sent MSB-first.
* @cmd.buswidth: number of IO lines used to transmit the command
* @cmd.opcode: operation opcode
+ * @cmd.dtr: whether the command opcode should be sent in DTR mode or not
* @addr.nbytes: number of address bytes to send. Can be zero if the operation
* does not need to send an address
* @addr.buswidth: number of IO lines used to transmit the address cycles
* Note that only @addr.nbytes are taken into account in this
* address value, so users should make sure the value fits in the
* assigned number of bytes.
+ * @addr.dtr: whether the address should be sent in DTR mode or not
* @dummy.nbytes: number of dummy bytes to send after an opcode or address. Can
* be zero if the operation does not require dummy bytes
* @dummy.buswidth: number of IO lanes used to transmit the dummy bytes
+ * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or not
* @data.buswidth: number of IO lanes used to send/receive the data
+ * @data.dtr: whether the data should be sent in DTR mode or not
* @data.dir: direction of the transfer
* @data.buf.in: input buffer
* @data.buf.out: output buffer
*/
struct spi_mem_op {
struct {
+ u8 nbytes;
u8 buswidth;
- u8 opcode;
+ u8 dtr : 1;
+ u16 opcode;
} cmd;
struct {
u8 nbytes;
u8 buswidth;
+ u8 dtr : 1;
u64 val;
} addr;
struct {
u8 nbytes;
u8 buswidth;
+ u8 dtr : 1;
} dummy;
struct {
u8 buswidth;
+ u8 dtr : 1;
enum spi_mem_data_dir dir;
unsigned int nbytes;
/* buf.{in,out} must be DMA-able. */
.dummy = __dummy, \
.data = __data, \
}
+/**
+ * struct spi_mem_dirmap_info - Direct mapping information
+ * @op_tmpl: operation template that should be used by the direct mapping when
+ * the memory device is accessed
+ * @offset: absolute offset this direct mapping is pointing to
+ * @length: length in byte of this direct mapping
+ *
+ * This information is used by the controller specific implementation to know
+ * the portion of memory that is directly mapped and the spi_mem_op that should
+ * be used to access the device.
+ * A direct mapping is only valid for one direction (read or write) and this
+ * direction is directly encoded in the ->op_tmpl.data.dir field.
+ */
+struct spi_mem_dirmap_info {
+ struct spi_mem_op op_tmpl;
+ u64 offset;
+ u64 length;
+};
+
+/**
+ * struct spi_mem_dirmap_desc - Direct mapping descriptor
+ * @mem: the SPI memory device this direct mapping is attached to
+ * @info: information passed at direct mapping creation time
+ * @nodirmap: set to 1 if the SPI controller does not implement
+ * ->mem_ops->dirmap_create() or when this function returned an
+ * error. If @nodirmap is true, all spi_mem_dirmap_{read,write}()
+ * calls will use spi_mem_exec_op() to access the memory. This is a
+ * degraded mode that allows spi_mem drivers to use the same code
+ * no matter whether the controller supports direct mapping or not
+ * @priv: field pointing to controller specific data
+ *
+ * Common part of a direct mapping descriptor. This object is created by
+ * spi_mem_dirmap_create() and controller implementation of ->create_dirmap()
+ * can create/attach direct mapping resources to the descriptor in the ->priv
+ * field.
+ */
+struct spi_mem_dirmap_desc {
+ struct spi_slave *slave;
+ struct spi_mem_dirmap_info info;
+ unsigned int nodirmap;
+ void *priv;
+};
#ifndef __UBOOT__
/**
* limitations)
* @supports_op: check if an operation is supported by the controller
* @exec_op: execute a SPI memory operation
+ * @dirmap_create: create a direct mapping descriptor that can later be used to
+ * access the memory device. This method is optional
+ * @dirmap_destroy: destroy a memory descriptor previous created by
+ * ->dirmap_create()
+ * @dirmap_read: read data from the memory device using the direct mapping
+ * created by ->dirmap_create(). The function can return less
+ * data than requested (for example when the request is crossing
+ * the currently mapped area), and the caller of
+ * spi_mem_dirmap_read() is responsible for calling it again in
+ * this case.
+ * @dirmap_write: write data to the memory device using the direct mapping
+ * created by ->dirmap_create(). The function can return less
+ * data than requested (for example when the request is crossing
+ * the currently mapped area), and the caller of
+ * spi_mem_dirmap_write() is responsible for calling it again in
+ * this case.
*
* This interface should be implemented by SPI controllers providing an
* high-level interface to execute SPI memory operation, which is usually the
* case for QSPI controllers.
+ *
+ * Note on ->dirmap_{read,write}(): drivers should avoid accessing the direct
+ * mapping from the CPU because doing that can stall the CPU waiting for the
+ * SPI mem transaction to finish, and this will make real-time maintainers
+ * unhappy and might make your system less reactive. Instead, drivers should
+ * use DMA to access this direct mapping.
*/
struct spi_controller_mem_ops {
int (*adjust_op_size)(struct spi_slave *slave, struct spi_mem_op *op);
const struct spi_mem_op *op);
int (*exec_op)(struct spi_slave *slave,
const struct spi_mem_op *op);
+ int (*dirmap_create)(struct spi_mem_dirmap_desc *desc);
+ void (*dirmap_destroy)(struct spi_mem_dirmap_desc *desc);
+ ssize_t (*dirmap_read)(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf);
+ ssize_t (*dirmap_write)(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf);
};
#ifndef __UBOOT__
const struct spi_mem_op *op,
struct sg_table *sg)
{
- return -ENOTSUPP;
+ return -ENOSYS;
}
static inline void
int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op);
bool spi_mem_supports_op(struct spi_slave *slave, const struct spi_mem_op *op);
+bool spi_mem_dtr_supports_op(struct spi_slave *slave,
+ const struct spi_mem_op *op);
+
+bool spi_mem_default_supports_op(struct spi_slave *slave,
+ const struct spi_mem_op *op);
int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op);
+bool spi_mem_default_supports_op(struct spi_slave *mem,
+ const struct spi_mem_op *op);
+
+struct spi_mem_dirmap_desc *
+spi_mem_dirmap_create(struct spi_slave *mem,
+ const struct spi_mem_dirmap_info *info);
+void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc);
+ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf);
+ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf);
+
#ifndef __UBOOT__
int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv,
struct module *owner);