Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI

[platform/kernel/u-boot.git] / include / sdhci.h

diff --git a/include/sdhci.h b/include/sdhci.h
index eee493a..44a0d84 100644 (file)
--- a/include/sdhci.h
+++ b/include/sdhci.h
@@ -9,6 +9,8 @@
 #ifndef __SDHCI_HW_H
 #define __SDHCI_HW_H
 
+#include <linux/bitops.h>
+#include <linux/types.h>
 #include <asm/io.h>
 #include <mmc.h>
 #include <asm/gpio.h>
@@ -144,7 +146,23 @@
 
 #define SDHCI_ACMD12_ERR       0x3C
 
-/* 3E-3F reserved */
+#define SDHCI_HOST_CONTROL2    0x3E
+#define  SDHCI_CTRL_UHS_MASK   0x0007
+#define  SDHCI_CTRL_UHS_SDR12  0x0000
+#define  SDHCI_CTRL_UHS_SDR25  0x0001
+#define  SDHCI_CTRL_UHS_SDR50  0x0002
+#define  SDHCI_CTRL_UHS_SDR104 0x0003
+#define  SDHCI_CTRL_UHS_DDR50  0x0004
+#define  SDHCI_CTRL_HS400      0x0005 /* Non-standard */
+#define  SDHCI_CTRL_VDD_180    0x0008
+#define  SDHCI_CTRL_DRV_TYPE_MASK      0x0030
+#define  SDHCI_CTRL_DRV_TYPE_B 0x0000
+#define  SDHCI_CTRL_DRV_TYPE_A 0x0010
+#define  SDHCI_CTRL_DRV_TYPE_C 0x0020
+#define  SDHCI_CTRL_DRV_TYPE_D 0x0030
+#define  SDHCI_CTRL_EXEC_TUNING        0x0040
+#define  SDHCI_CTRL_TUNED_CLK  0x0080
+#define  SDHCI_CTRL_PRESET_VAL_ENABLE  0x8000
 
 #define SDHCI_CAPABILITIES     0x40
 #define  SDHCI_TIMEOUT_CLK_MASK        0x0000003F
@@ -247,13 +265,13 @@ struct sdhci_ops {
 #endif
        int     (*get_cd)(struct sdhci_host *host);
        void    (*set_control_reg)(struct sdhci_host *host);
-       void    (*set_ios_post)(struct sdhci_host *host);
+       int     (*set_ios_post)(struct sdhci_host *host);
        void    (*set_clock)(struct sdhci_host *host, u32 div);
        int (*platform_execute_tuning)(struct mmc *host, u8 opcode);
-       void (*set_delay)(struct sdhci_host *host);
+       int (*set_delay)(struct sdhci_host *host);
+       int     (*deferred_probe)(struct sdhci_host *host);
 };
 
-#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
 #define ADMA_MAX_LEN   65532
 #ifdef CONFIG_DMA_ADDR_T_64BIT
 #define ADMA_DESC_LEN  16
@@ -284,7 +302,7 @@ struct sdhci_adma_desc {
        u32 addr_hi;
 #endif
 } __packed;
-#endif
+
 struct sdhci_host {
        const char *name;
        void *ioaddr;
@@ -305,6 +323,8 @@ struct sdhci_host {
        uint    voltages;
 
        struct mmc_config cfg;
+       void *align_buffer;
+       bool force_align_buffer;
        dma_addr_t start_addr;
        int flags;
 #define USE_SDMA       (0x1 << 0)
@@ -314,7 +334,6 @@ struct sdhci_host {
        dma_addr_t adma_addr;
 #if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
        struct sdhci_adma_desc *adma_desc_table;
-       uint desc_slot;
 #endif
 };
 
@@ -421,10 +440,10 @@ static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
  * ...
  *
  * Inside U_BOOT_DRIVER():
- *     .platdata_auto_alloc_size = sizeof(struct msm_sdhc_plat),
+ *     .plat_auto      = sizeof(struct msm_sdhc_plat),
  *
  * To access platform data:
- *     struct msm_sdhc_plat *plat = dev_get_platdata(dev);
+ *     struct msm_sdhc_plat *plat = dev_get_plat(dev);
  *
  * See msm_sdhci.c for an example.
  *
@@ -467,11 +486,27 @@ int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg);
 int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min);
 #endif /* !CONFIG_BLK */
 
+void sdhci_set_uhs_timing(struct sdhci_host *host);
 #ifdef CONFIG_DM_MMC
 /* Export the operations to drivers */
 int sdhci_probe(struct udevice *dev);
+int sdhci_set_clock(struct mmc *mmc, unsigned int clock);
+
+/**
+ * sdhci_set_control_reg - Set control registers
+ *
+ * This is used set up control registers for voltage level and UHS speed
+ * mode.
+ *
+ * @host: SDHCI host structure
+ */
+void sdhci_set_control_reg(struct sdhci_host *host);
 extern const struct dm_mmc_ops sdhci_ops;
 #else
 #endif
 
+struct sdhci_adma_desc *sdhci_adma_init(void);
+void sdhci_prepare_adma_table(struct sdhci_adma_desc *table,
+                             struct mmc_data *data, dma_addr_t addr);
+
 #endif /* __SDHCI_HW_H */