MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig

[platform/kernel/u-boot.git] / include / scsi.h

diff --git a/include/scsi.h b/include/scsi.h
index b47c746..9efefea 100644 (file)
--- a/include/scsi.h
+++ b/include/scsi.h
@@ -15,27 +15,47 @@
 
 struct udevice;
 
+/**
+ * struct scsi_cmd - information about a SCSI command to be processed
+ *
+ * @cmd: command
+ * @sense_buf: for request sense
+ * @status: SCSI Status
+ * @target: Target ID
+ * @lun: Target LUN
+ * @cmdlen: command len
+ * @datalen: Total data length
+ * @pdata: pointer to data
+ * @msgout: Messge out buffer (NOT USED)
+ * @msgin: Message in buffer
+ * @sensecmdlen: Sense command len
+ * @sensedatalen: Sense data len
+ * @sensecmd: Sense command
+ * @contr_stat: Controller Status
+ * @trans_bytes: tranfered bytes
+ * @priv: Private value
+ * @dma_dir: Direction of data structure
+ */
 struct scsi_cmd {
-       unsigned char           cmd[16];                                        /* command                                 */
-       /* for request sense */
-       unsigned char           sense_buf[64]
+       unsigned char cmd[16];
+       unsigned char sense_buf[64]
                __attribute__((aligned(ARCH_DMA_MINALIGN)));
-       unsigned char           status;                                         /* SCSI Status                   */
-       unsigned char           target;                                         /* Target ID                             */
-       unsigned char           lun;                                                    /* Target LUN        */
-       unsigned char           cmdlen;                                         /* command len                          */
-       unsigned long           datalen;                                        /* Total data length    */
-       unsigned char   *       pdata;                                          /* pointer to data              */
-       unsigned char           msgout[12];                             /* Messge out buffer (NOT USED) */
-       unsigned char           msgin[12];                              /* Message in buffer    */
-       unsigned char           sensecmdlen;                    /* Sense command len    */
-       unsigned long           sensedatalen;                   /* Sense data len                       */
-       unsigned char           sensecmd[6];                    /* Sense command                        */
-       unsigned long           contr_stat;                             /* Controller Status    */
-       unsigned long           trans_bytes;                    /* tranfered bytes              */
-
-       unsigned int            priv;
-       enum dma_data_direction dma_dir;
+       unsigned char status;
+       unsigned char target;
+       unsigned char lun;
+       unsigned char cmdlen;
+       unsigned long datalen;
+       unsigned char *pdata;
+       unsigned char msgout[12];
+       unsigned char msgin[12];
+       unsigned char sensecmdlen;
+       unsigned long sensedatalen;
+       unsigned char sensecmd[6];
+       unsigned long contr_stat;
+       unsigned long trans_bytes;
+
+       unsigned int priv;
+       enum dma_data_direction dma_dir;
 };
 
 /*-----------------------------------------------------------
@@ -168,6 +188,84 @@ struct scsi_cmd {
 #define SCSI_WRITE_SAME        0x41            /* Write Same (O) */
 
 /**
+ * enum scsi_cmd_phase - current phase of the SCSI protocol
+ *
+ * @SCSIPH_START: Start phase
+ * @SCSIPH_DATA: Data phase
+ * @SCSIPH_STATUS: Status phase
+ */
+enum scsi_cmd_phase {
+       SCSIPH_START,
+       SCSIPH_DATA,
+       SCSIPH_STATUS,
+};
+
+/**
+ * struct scsi_inquiry_resp - holds a SCSI inquiry command
+ *
+ * @type; command type
+ * @flags; command flags
+ * @version; command version
+ * @data_format; data format
+ * @additional_len; additional data length
+ * @spare[3]; spare bytes
+ * @vendor[8]; vendor information
+ * @product[16]; production information
+ * @revision[4]; revision information
+ */
+struct scsi_inquiry_resp {
+       u8 type;
+       u8 flags;
+       u8 version;
+       u8 data_format;
+       u8 additional_len;
+       u8 spare[3];
+       char vendor[8];
+       char product[16];
+       char revision[4];
+};
+
+/**
+ * struct scsi_read_capacity_resp - holds the response to a read-capacity cmd
+ *
+ * @last_block_addr: Logical block address of last block
+ * @block_len: Length of each block in bytes
+ */
+struct scsi_read_capacity_resp {
+       u32 last_block_addr;
+       u32 block_len;
+};
+
+/**
+ * struct scsi_read10_req - holds a SCSI READ10 request
+ *
+ * @cmd; command type
+ * @lun_flags; LUN flags
+ * @lba; Logical block address to start reading from
+ * @spare; spare bytes
+ * @xfer_len: number of blocks to read
+ * @spare2: more spare bytes
+ */
+struct __packed scsi_read10_req {
+       u8 cmd;
+       u8 lun_flags;
+       u32 lba;
+       u8 spare;
+       u16 xfer_len;
+       u8 spare2[3];
+};
+
+/** struct scsi_write10_req - data for the write10 command */
+struct __packed scsi_write10_req {
+       u8 cmd;
+       u8 lun_flags;
+       u32 lba;
+       u8 spare;
+       u16 xfer_len;
+       u8 spare2[3];
+};
+
+/**
  * struct scsi_plat - stores information about SCSI controller
  *
  * @base: Controller base address