#include <bcd.h>
#include <rtc_def.h>
+typedef int64_t time64_t;
+
#ifdef CONFIG_DM_RTC
+struct udevice;
+
struct rtc_ops {
/**
* get() - get the current time
int (*reset)(struct udevice *dev);
/**
+ * read() - Read multiple 8-bit registers
+ *
+ * @dev: Device to read from
+ * @reg: First register to read
+ * @buf: Output buffer
+ * @len: Number of registers to read
+ * @return 0 if OK, -ve on error
+ */
+ int (*read)(struct udevice *dev, unsigned int reg,
+ u8 *buf, unsigned int len);
+
+ /**
+ * write() - Write multiple 8-bit registers
+ *
+ * @dev: Device to write to
+ * @reg: First register to write
+ * @buf: Input buffer
+ * @len: Number of registers to write
+ * @return 0 if OK, -ve on error
+ */
+ int (*write)(struct udevice *dev, unsigned int reg,
+ const u8 *buf, unsigned int len);
+
+ /**
* read8() - Read an 8-bit register
*
* @dev: Device to read from
* @dev: Device to write to
* @reg: Register to write
* @value: Value to write
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
*/
int (*write8)(struct udevice *dev, unsigned int reg, int val);
};
*
* @dev: Device to read from
* @time: Place to put the current time
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
*/
int dm_rtc_get(struct udevice *dev, struct rtc_time *time);
*
* @dev: Device to read from
* @time: Time to write into the RTC
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
*/
int dm_rtc_set(struct udevice *dev, struct rtc_time *time);
* the caller.
*
* @dev: Device to read from
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
*/
int dm_rtc_reset(struct udevice *dev);
/**
+ * dm_rtc_read() - Read multiple 8-bit registers
+ *
+ * @dev: Device to read from
+ * @reg: First register to read
+ * @buf: Output buffer
+ * @len: Number of registers to read
+ * Return: 0 if OK, -ve on error
+ */
+int dm_rtc_read(struct udevice *dev, unsigned int reg, u8 *buf, unsigned int len);
+
+/**
+ * dm_rtc_write() - Write multiple 8-bit registers
+ *
+ * @dev: Device to write to
+ * @reg: First register to write
+ * @buf: Input buffer
+ * @len: Number of registers to write
+ * Return: 0 if OK, -ve on error
+ */
+int dm_rtc_write(struct udevice *dev, unsigned int reg,
+ const u8 *buf, unsigned int len);
+
+/**
* rtc_read8() - Read an 8-bit register
*
* @dev: Device to read from
* @reg: Register to read
- * @return value read, or -ve on error
+ * Return: value read, or -ve on error
*/
int rtc_read8(struct udevice *dev, unsigned int reg);
* @dev: Device to write to
* @reg: Register to write
* @value: Value to write
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
*/
int rtc_write8(struct udevice *dev, unsigned int reg, int val);
* @dev: Device to read from
* @reg: Offset to start reading from
* @valuep: Place to put the value that is read
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
*/
int rtc_read16(struct udevice *dev, unsigned int reg, u16 *valuep);
* @dev: Device to write to
* @reg: Register to start writing to
* @value: Value to write
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
*/
int rtc_write16(struct udevice *dev, unsigned int reg, u16 value);
* @dev: Device to read from
* @reg: Offset to start reading from
* @valuep: Place to put the value that is read
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
*/
int rtc_read32(struct udevice *dev, unsigned int reg, u32 *valuep);
* @dev: Device to write to
* @reg: Register to start writing to
* @value: Value to write
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
*/
int rtc_write32(struct udevice *dev, unsigned int reg, u32 value);
+#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
+int rtc_enable_32khz_output(int busnum, int chip_addr);
+#endif
+
#else
int rtc_get (struct rtc_time *);
int rtc_set (struct rtc_time *);
void rtc_reset (void);
+#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
void rtc_enable_32khz_output(void);
+#endif
/**
* rtc_read8() - Read an 8-bit register
*
* @reg: Register to read
- * @return value read
+ * Return: value read
*/
int rtc_read8(int reg);
* rtc_read32() - Read a 32-bit value from the RTC
*
* @reg: Offset to start reading from
- * @return value read
+ * Return: value read
*/
u32 rtc_read32(int reg);
* is_leap_year - Check if year is a leap year
*
* @year Year
- * @return 1 if leap year
+ * Return: 1 if leap year
*/
static inline bool is_leap_year(unsigned int year)
{
* It sets time->tm_wdaay to the correct day of the week.
*
* @time: Time to inspect. tm_wday is updated
- * @return 0 if OK, -EINVAL if the weekday could not be determined
+ * Return: 0 if OK, -EINVAL if the weekday could not be determined
*/
int rtc_calc_weekday(struct rtc_time *time);
void rtc_to_tm(u64 time_t, struct rtc_time *time);
/**
- * rtc_mktime() - Convert a broken-out time into a time_t value
+ * rtc_mktime() - Convert a broken-out time into a time64_t value
*
* The following fields need to be valid for this function to work:
* tm_sec, tm_min, tm_hour, tm_mday, tm_mon, tm_year
* Note that tm_wday and tm_yday are ignored.
*
* @time: Broken-out time to convert
- * @return corresponding time_t value, seconds since 1970-01-01 00:00:00
+ * Return: corresponding time64_t value, seconds since 1970-01-01 00:00:00
+ */
+time64_t rtc_mktime(const struct rtc_time *time);
+
+/**
+ * rtc_month_days() - The number of days in the month
+ *
+ * @month: month (January = 0)
+ * @year: year (4 digits)
*/
-unsigned long rtc_mktime(const struct rtc_time *time);
+int rtc_month_days(unsigned int month, unsigned int year);
#endif /* _RTC_H_ */
projects / platform / kernel / u-boot.git / blobdiff