#ifndef __REGMAP_H
#define __REGMAP_H
+#include <linux/delay.h>
+
/**
* DOC: Overview
*
ulong size;
};
+struct regmap_bus;
+
+/**
+ * struct regmap_config - Configure the behaviour of a regmap
+ *
+ * @width: Width of the read/write operations. Defaults to
+ * REGMAP_SIZE_32 if set to 0.
+ * @reg_offset_shift Left shift the register offset by this value before
+ * performing read or write.
+ * @r_start: If specified, the regmap is created with one range
+ * which starts at this address, instead of finding the
+ * start from device tree.
+ * @r_size: Same as above for the range size
+ */
+struct regmap_config {
+ enum regmap_size_t width;
+ u32 reg_offset_shift;
+ ulong r_start;
+ ulong r_size;
+};
+
/**
* struct regmap - a way of accessing hardware/bus registers
*
+ * @width: Width of the read/write operations. Defaults to
+ * REGMAP_SIZE_32 if set to 0.
+ * @reg_offset_shift Left shift the register offset by this value before
+ * performing read or write.
* @range_count: Number of ranges available within the map
* @ranges: Array of ranges
*/
struct regmap {
enum regmap_endianness_t endianness;
+ enum regmap_size_t width;
+ u32 reg_offset_shift;
int range_count;
struct regmap_range ranges[0];
};
*/
/**
- * regmap_write() - Write a 32-bit value to a regmap
+ * regmap_write() - Write a value to a regmap
*
* @map: Regmap to write to
* @offset: Offset in the regmap to write to
* @val: Data to write to the regmap at the specified offset
*
- * Note that this function will only write values of 32 bit width to the
- * regmap; if the size of data to be read is different, the regmap_raw_write
- * function can be used.
- *
* Return: 0 if OK, -ve on error
*/
int regmap_write(struct regmap *map, uint offset, uint val);
/**
- * regmap_read() - Read a 32-bit value from a regmap
+ * regmap_read() - Read a value from a regmap
*
* @map: Regmap to read from
* @offset: Offset in the regmap to read from
* @valp: Pointer to the buffer to receive the data read from the regmap
* at the specified offset
*
- * Note that this function will only read values of 32 bit width from the
- * regmap; if the size of data to be read is different, the regmap_raw_read
- * function can be used.
- *
* Return: 0 if OK, -ve on error
*/
int regmap_read(struct regmap *map, uint offset, uint *valp);
* @val_len: Length of the data to be written to the regmap
*
* Note that this function will, as opposed to regmap_write, write data of
- * arbitrary length to the regmap, and not just 32-bit values, and is thus a
- * generalized version of regmap_write.
+ * arbitrary length to the regmap, and not just the size configured in the
+ * regmap (defaults to 32-bit) and is thus a generalized version of
+ * regmap_write.
*
* Return: 0 if OK, -ve on error
*/
* @val_len: Length of the data to be read from the regmap
*
* Note that this function will, as opposed to regmap_read, read data of
- * arbitrary length from the regmap, and not just 32-bit values, and is thus a
- * generalized version of regmap_read.
+ * arbitrary length from the regmap, and not just the size configured in the
+ * regmap (defaults to 32-bit) and is thus a generalized version of
+ * regmap_read.
*
* Return: 0 if OK, -ve on error
*/
timeout_ms, 0) \
/**
+ * regmap_field_read_poll_timeout - Poll until a condition is met or a timeout
+ * occurs
+ *
+ * @field: Regmap field to read from
+ * @val: Unsigned integer variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops).
+ * @timeout_ms: Timeout in ms, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_field_read
+ * error return value in case of a error read. In the two former cases,
+ * the last read value at @addr is stored in @val.
+ *
+ * This is modelled after the regmap_read_poll_timeout macros in linux but
+ * with millisecond timeout.
+ */
+#define regmap_field_read_poll_timeout(field, val, cond, sleep_us, timeout_ms) \
+({ \
+ unsigned long __start = get_timer(0); \
+ int __ret; \
+ for (;;) { \
+ __ret = regmap_field_read((field), &(val)); \
+ if (__ret) \
+ break; \
+ if (cond) \
+ break; \
+ if ((timeout_ms) && get_timer(__start) > (timeout_ms)) { \
+ __ret = regmap_field_read((field), &(val)); \
+ break; \
+ } \
+ if ((sleep_us)) \
+ udelay((sleep_us)); \
+ } \
+ __ret ?: ((cond) ? 0 : -ETIMEDOUT); \
+})
+
+/**
* regmap_update_bits() - Perform a read/modify/write using a mask
*
* @map: The map returned by regmap_init_mem*()
int regmap_init_mem(ofnode node, struct regmap **mapp);
/**
- * regmap_init_mem_platdata() - Set up a new memory register map for
+ * regmap_init_mem_plat() - Set up a new memory register map for
* of-platdata
*
* @dev: Device that uses this map
* Use regmap_uninit() to free it.
*
*/
-int regmap_init_mem_platdata(struct udevice *dev, fdt_val_t *reg, int count,
- struct regmap **mapp);
+int regmap_init_mem_plat(struct udevice *dev, fdt_val_t *reg, int count,
+ struct regmap **mapp);
int regmap_init_mem_index(ofnode node, struct regmap **mapp, int index);
/**
+ * regmap_init_mem_range() - Set up a new memory region for ofnode with the
+ * specified range.
+ *
+ * @node: The ofnode for the map.
+ * @r_start: Start of the range.
+ * @r_size: Size of the range.
+ * @mapp: Returns allocated map.
+ *
+ * Return: 0 in success, -errno otherwise
+ *
+ * This creates a regmap with one range where instead of extracting the range
+ * from 'node', it is created based on the parameters specified. This is
+ * useful when a driver needs to calculate the base of the regmap at runtime,
+ * and can't specify it in device tree.
+ */
+int regmap_init_mem_range(ofnode node, ulong r_start, ulong r_size,
+ struct regmap **mapp);
+
+/**
+ * devm_regmap_init() - Initialise register map (device managed)
+ *
+ * @dev: Device that will be interacted with
+ * @bus: Bus-specific callbacks to use with device (IGNORED)
+ * @bus_context: Data passed to bus-specific callbacks (IGNORED)
+ * @config: Configuration for register map
+ *
+ * @Return a valid pointer to a struct regmap or a ERR_PTR() on error.
+ * The structure is automatically freed when the device is unbound
+ */
+struct regmap *devm_regmap_init(struct udevice *dev,
+ const struct regmap_bus *bus,
+ void *bus_context,
+ const struct regmap_config *config);
+/**
* regmap_get_range() - Obtain the base memory address of a regmap range
*
* @map: Regmap to query
*/
int regmap_uninit(struct regmap *map);
+/**
+ * struct reg_field - Description of an register field
+ *
+ * @reg: Offset of the register within the regmap bank
+ * @lsb: lsb of the register field.
+ * @msb: msb of the register field.
+ */
+struct reg_field {
+ unsigned int reg;
+ unsigned int lsb;
+ unsigned int msb;
+};
+
+struct regmap_field;
+
+/**
+ * REG_FIELD() - A convenient way to initialize a 'struct reg_feild'.
+ *
+ * @_reg: Offset of the register within the regmap bank
+ * @_lsb: lsb of the register field.
+ * @_msb: msb of the register field.
+ *
+ * Register fields are often described in terms of 3 things: the register it
+ * belongs to, its LSB, and its MSB. This macro can be used by drivers to
+ * clearly and easily initialize a 'struct regmap_field'.
+ *
+ * For example, say a device has a register at offset DEV_REG1 (0x100) and a
+ * field of DEV_REG1 is on bits [7:3]. So a driver can initialize a regmap
+ * field for this by doing:
+ * struct reg_field field = REG_FIELD(DEV_REG1, 3, 7);
+ */
+#define REG_FIELD(_reg, _lsb, _msb) { \
+ .reg = _reg, \
+ .lsb = _lsb, \
+ .msb = _msb, \
+ }
+
+/**
+ * devm_regmap_field_alloc() - Allocate and initialise a register field.
+ *
+ * @dev: Device that will be interacted with
+ * @regmap: regmap bank in which this register field is located.
+ * @reg_field: Register field with in the bank.
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap_field. The regmap_field will be automatically freed
+ * by the device management code.
+ */
+struct regmap_field *devm_regmap_field_alloc(struct udevice *dev,
+ struct regmap *regmap,
+ struct reg_field reg_field);
+/**
+ * devm_regmap_field_free() - Free a register field allocated using
+ * devm_regmap_field_alloc.
+ *
+ * @dev: Device that will be interacted with
+ * @field: regmap field which should be freed.
+ *
+ * Free register field allocated using devm_regmap_field_alloc(). Usually
+ * drivers need not call this function, as the memory allocated via devm
+ * will be freed as per device-driver life-cyle.
+ */
+void devm_regmap_field_free(struct udevice *dev, struct regmap_field *field);
+
+/**
+ * regmap_field_write() - Write a value to a regmap field
+ *
+ * @field: Regmap field to write to
+ * @val: Data to write to the regmap at the specified offset
+ *
+ * Return: 0 if OK, -ve on error
+ */
+int regmap_field_write(struct regmap_field *field, unsigned int val);
+
+/**
+ * regmap_read() - Read a 32-bit value from a regmap
+ *
+ * @field: Regmap field to write to
+ * @valp: Pointer to the buffer to receive the data read from the regmap
+ * field
+ *
+ * Return: 0 if OK, -ve on error
+ */
+int regmap_field_read(struct regmap_field *field, unsigned int *val);
+
#endif