| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+----------------------------------------------------------------------------*/
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
#ifndef __PPC440_H__
#define __PPC440_H__
+#define CFG_DCACHE_SIZE (32 << 10) /* For AMCC 440 CPUs */
+
/*--------------------------------------------------------------------- */
/* Special Purpose Registers */
/*--------------------------------------------------------------------- */
/*-----------------------------------------------------------------------------
| Clocking Controller
+----------------------------------------------------------------------------*/
-#define CLOCKING_DCR_BASE 0x0c
-#define clkcfga (CLOCKING_DCR_BASE+0x0)
-#define clkcfgd (CLOCKING_DCR_BASE+0x1)
-
/* values for clkcfga register - indirect addressing of these regs */
#define clk_clkukpd 0x0020
#define clk_pllc 0x0040
#define clk_icfg 0x0140
/* 440gx sdr register definations */
-#define SDR_DCR_BASE 0x0e
-#define sdrcfga (SDR_DCR_BASE+0x0)
-#define sdrcfgd (SDR_DCR_BASE+0x1)
#define sdr_sdstp0 0x0020 /* */
#define sdr_sdstp1 0x0021 /* */
#define SDR_PINSTP 0x0040
#define sdr_plbtr 0x4200
#define sdr_mfr 0x4300 /* SDR0_MFR reg */
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* test-only!!!! */
-#define DDR0_00 0x00
-#define DDR0_01 0x01
-#define DDR0_02 0x02
-#define DDR0_03 0x03
-#define DDR0_04 0x04
-#define DDR0_05 0x05
-#define DDR0_06 0x06
-#define DDR0_07 0x07
-#define DDR0_08 0x08
-#define DDR0_09 0x09
-#define DDR0_10 0x0A
-#define DDR0_11 0x0B
-#define DDR0_12 0x0C
-#define DDR0_13 0x0D
-#define DDR0_14 0x0E
-#define DDR0_15 0x0F
-#define DDR0_16 0x10
-#define DDR0_17 0x11
-#define DDR0_18 0x12
-#define DDR0_19 0x13
-#define DDR0_20 0x14
-#define DDR0_21 0x15
-#define DDR0_22 0x16
-#define DDR0_23 0x17
-#define DDR0_24 0x18
-#define DDR0_25 0x19
-#define DDR0_26 0x1A
-#define DDR0_27 0x1B
-#define DDR0_28 0x1C
-#define DDR0_29 0x1D
-#define DDR0_30 0x1E
-#define DDR0_31 0x1F
-#define DDR0_32 0x20
-#define DDR0_33 0x21
-#define DDR0_34 0x22
-#define DDR0_35 0x23
-#define DDR0_36 0x24
-#define DDR0_37 0x25
-#define DDR0_38 0x26
-#define DDR0_39 0x27
-#define DDR0_40 0x28
-#define DDR0_41 0x29
-#define DDR0_42 0x2A
-#define DDR0_43 0x2B
-#define DDR0_44 0x2C
-#endif /*CONFIG_440EPX*/
-
-/*-----------------------------------------------------------------------------
- | SDRAM Controller
- +----------------------------------------------------------------------------*/
-#define SDRAM_DCR_BASE 0x10
-#define memcfga (SDRAM_DCR_BASE+0x0) /* Memory configuration address reg */
-#define memcfgd (SDRAM_DCR_BASE+0x1) /* Memory configuration data reg */
-
-/* values for memcfga register - indirect addressing of these regs */
-#define mem_besr0_clr 0x0000 /* bus error status reg 0 (clr) */
-#define mem_besr0_set 0x0004 /* bus error status reg 0 (set) */
-#define mem_besr1_clr 0x0008 /* bus error status reg 1 (clr) */
-#define mem_besr1_set 0x000c /* bus error status reg 1 (set) */
-#define mem_bear 0x0010 /* bus error address reg */
-#define mem_mirq_clr 0x0011 /* bus master interrupt (clr) */
-#define mem_mirq_set 0x0012 /* bus master interrupt (set) */
-#define mem_slio 0x0018 /* ddr sdram slave interface options */
-#define mem_cfg0 0x0020 /* ddr sdram options 0 */
-#define mem_cfg1 0x0021 /* ddr sdram options 1 */
-#define mem_devopt 0x0022 /* ddr sdram device options */
-#define mem_mcsts 0x0024 /* memory controller status */
-#define mem_rtr 0x0030 /* refresh timer register */
-#define mem_pmit 0x0034 /* power management idle timer */
-#define mem_uabba 0x0038 /* plb UABus base address */
-#define mem_b0cr 0x0040 /* ddr sdram bank 0 configuration */
-#define mem_b1cr 0x0044 /* ddr sdram bank 1 configuration */
-#define mem_b2cr 0x0048 /* ddr sdram bank 2 configuration */
-#define mem_b3cr 0x004c /* ddr sdram bank 3 configuration */
-#define mem_tr0 0x0080 /* sdram timing register 0 */
-#define mem_tr1 0x0081 /* sdram timing register 1 */
-#define mem_clktr 0x0082 /* ddr clock timing register */
-#define mem_wddctr 0x0083 /* write data/dm/dqs clock timing reg */
-#define mem_dlycal 0x0084 /* delay line calibration register */
-#define mem_eccesr 0x0098 /* ECC error status */
-
#ifdef CONFIG_440GX
#define sdr_amp 0x0240
#define sdr_xpllc 0x01c1
#define sdr_sdstp6 0x4005
#define sdr_sdstp7 0x4007
-#define SDR0_CFGADDR 0x00E
-#define SDR0_CFGDATA 0x00F
-
/******************************************************************************
* PCI express defines
******************************************************************************/
#define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */
#endif /* CONFIG_440SPE */
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-/*----------------------------------------------------------------------------+
-| SDRAM Controller
-+----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------+
-| SDRAM DLYCAL Options
-+-----------------------------------------------------------------------------*/
-#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
-#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
-#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
-
-/*----------------------------------------------------------------------------+
-| Memory queue defines
-+----------------------------------------------------------------------------*/
-/* A REVOIR versus RWC - SG*/
-#define SDRAMQ_DCR_BASE 0x040
-
-#define SDRAM_R0BAS (SDRAMQ_DCR_BASE+0x0) /* rank 0 base address & size */
-#define SDRAM_R1BAS (SDRAMQ_DCR_BASE+0x1) /* rank 1 base address & size */
-#define SDRAM_R2BAS (SDRAMQ_DCR_BASE+0x2) /* rank 2 base address & size */
-#define SDRAM_R3BAS (SDRAMQ_DCR_BASE+0x3) /* rank 3 base address & size */
-#define SDRAM_CONF1HB (SDRAMQ_DCR_BASE+0x5) /* configuration 1 HB */
-#define SDRAM_ERRSTATHB (SDRAMQ_DCR_BASE+0x7) /* error status HB */
-#define SDRAM_ERRADDUHB (SDRAMQ_DCR_BASE+0x8) /* error address upper 32 HB */
-#define SDRAM_ERRADDLHB (SDRAMQ_DCR_BASE+0x9) /* error address lower 32 HB */
-#define SDRAM_PLBADDULL (SDRAMQ_DCR_BASE+0xA) /* PLB base address upper 32 LL */
-#define SDRAM_CONF1LL (SDRAMQ_DCR_BASE+0xB) /* configuration 1 LL */
-#define SDRAM_ERRSTATLL (SDRAMQ_DCR_BASE+0xC) /* error status LL */
-#define SDRAM_ERRADDULL (SDRAMQ_DCR_BASE+0xD) /* error address upper 32 LL */
-#define SDRAM_ERRADDLLL (SDRAMQ_DCR_BASE+0xE) /* error address lower 32 LL */
-#define SDRAM_CONFPATHB (SDRAMQ_DCR_BASE+0xF) /* configuration between paths */
-#define SDRAM_PLBADDUHB (SDRAMQ_DCR_BASE+0x10) /* PLB base address upper 32 LL */
-
-/*-----------------------------------------------------------------------------+
-| Memory Bank 0-7 configuration
-+-----------------------------------------------------------------------------*/
-#if defined(CONFIG_440SPE)
-#define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */
-#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFFE00000)>>2)
-#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFFE00000)<<2)
-#endif /* CONFIG_440SPE */
-#if defined(CONFIG_440SP)
-#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */
-#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFF800000))
-#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFF800000))
-#endif /* CONFIG_440SP */
-#define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */
-#define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<6)
-#define SDRAM_RXBAS_SDSZ_DECODE(n) ((((unsigned long)(n))>>6)&0x3FF)
-#define SDRAM_RXBAS_SDSZ_0 0x00000000 /* 0M */
-#define SDRAM_RXBAS_SDSZ_8 0x0000FFC0 /* 8M */
-#define SDRAM_RXBAS_SDSZ_16 0x0000FF80 /* 16M */
-#define SDRAM_RXBAS_SDSZ_32 0x0000FF00 /* 32M */
-#define SDRAM_RXBAS_SDSZ_64 0x0000FE00 /* 64M */
-#define SDRAM_RXBAS_SDSZ_128 0x0000FC00 /* 128M */
-#define SDRAM_RXBAS_SDSZ_256 0x0000F800 /* 256M */
-#define SDRAM_RXBAS_SDSZ_512 0x0000F000 /* 512M */
-#define SDRAM_RXBAS_SDSZ_1024 0x0000E000 /* 1024M */
-#define SDRAM_RXBAS_SDSZ_2048 0x0000C000 /* 2048M */
-#define SDRAM_RXBAS_SDSZ_4096 0x00008000 /* 4096M */
-
-/*----------------------------------------------------------------------------+
-| Memory controller defines
-+----------------------------------------------------------------------------*/
-#define SDRAMC_DCR_BASE 0x010
-#define SDRAMC_CFGADDR (SDRAMC_DCR_BASE+0x0) /* Memory configuration add */
-#define SDRAMC_CFGDATA (SDRAMC_DCR_BASE+0x1) /* Memory configuration data */
-
-/* A REVOIR versus specs 4 bank - SG*/
-#define SDRAM_MCSTAT 0x14 /* memory controller status */
-#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
-#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
-#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
-#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
-#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
-#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
-#define SDRAM_CODT 0x26 /* on die termination for controller */
-#define SDRAM_VVPR 0x27 /* variable VRef programmming */
-#define SDRAM_OPARS 0x28 /* on chip driver control setup */
-#define SDRAM_OPART 0x29 /* on chip driver control trigger */
-#define SDRAM_RTR 0x30 /* refresh timer */
-#define SDRAM_PMIT 0x34 /* power management idle timer */
-#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
-#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
-#define SDRAM_MB2CF 0x48
-#define SDRAM_MB3CF 0x4C
-#define SDRAM_INITPLR0 0x50 /* manual initialization control */
-#define SDRAM_INITPLR1 0x51 /* manual initialization control */
-#define SDRAM_INITPLR2 0x52 /* manual initialization control */
-#define SDRAM_INITPLR3 0x53 /* manual initialization control */
-#define SDRAM_INITPLR4 0x54 /* manual initialization control */
-#define SDRAM_INITPLR5 0x55 /* manual initialization control */
-#define SDRAM_INITPLR6 0x56 /* manual initialization control */
-#define SDRAM_INITPLR7 0x57 /* manual initialization control */
-#define SDRAM_INITPLR8 0x58 /* manual initialization control */
-#define SDRAM_INITPLR9 0x59 /* manual initialization control */
-#define SDRAM_INITPLR10 0x5a /* manual initialization control */
-#define SDRAM_INITPLR11 0x5b /* manual initialization control */
-#define SDRAM_INITPLR12 0x5c /* manual initialization control */
-#define SDRAM_INITPLR13 0x5d /* manual initialization control */
-#define SDRAM_INITPLR14 0x5e /* manual initialization control */
-#define SDRAM_INITPLR15 0x5f /* manual initialization control */
-#define SDRAM_RQDC 0x70 /* read DQS delay control */
-#define SDRAM_RFDC 0x74 /* read feedback delay control */
-#define SDRAM_RDCC 0x78 /* read data capture control */
-#define SDRAM_DLCR 0x7A /* delay line calibration */
-#define SDRAM_CLKTR 0x80 /* DDR clock timing */
-#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
-#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
-#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
-#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
-#define SDRAM_MMODE 0x88 /* memory mode */
-#define SDRAM_MEMODE 0x89 /* memory extended mode */
-#define SDRAM_ECCCR 0x98 /* ECC error status */
-#define SDRAM_CID 0xA4 /* core ID */
-#define SDRAM_RID 0xA8 /* revision ID */
-
-/*-----------------------------------------------------------------------------+
-| Memory Controller Status
-+-----------------------------------------------------------------------------*/
-#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
-#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
-#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
-#define SDRAM_MCSTAT_SRMS_MASK 0x40000000 /* Mem self refresh stat mask */
-#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
-#define SDRAM_MCSTAT_SRMS_SF 0x40000000 /* Mem in self refresh */
-#define SDRAM_MCSTAT_IDLE_MASK 0x20000000 /* Mem self refresh stat mask */
-#define SDRAM_MCSTAT_IDLE_NOT 0x00000000 /* Mem contr not idle */
-#define SDRAM_MCSTAT_IDLE 0x20000000 /* Mem contr idle */
-
-/*-----------------------------------------------------------------------------+
-| Memory Controller Options 1
-+-----------------------------------------------------------------------------*/
-#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask*/
-#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
-#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
-#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */
-#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/
-#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((unsigned long)(n))>>28)&0x3)
-#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
-#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
-#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
-#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
-#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
-#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
-#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
-#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
-#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
-#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
-#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
-#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
-#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
-#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */
-#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
-#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
-#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
-#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
-#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
-#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
-#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
-#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
-#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
-#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
-#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
-#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
-#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
-#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
-#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */
-
-/*-----------------------------------------------------------------------------+
-| Memory Controller Options 2
-+-----------------------------------------------------------------------------*/
-#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
-#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
-#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
-#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
-#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
-#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
-#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
-#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
-#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */
-#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
-#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */
-#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */
-#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
-#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */
-#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */
-#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
-#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
-#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
-
-/*-----------------------------------------------------------------------------+
-| SDRAM Refresh Timer Register
-+-----------------------------------------------------------------------------*/
-#define SDRAM_RTR_RINT_MASK 0xFFF80000
-#define SDRAM_RTR_RINT_ENCODE(n) ((((unsigned long)(n))&0xFFF8)<<16)
-#define SDRAM_RTR_RINT_DECODE(n) ((((unsigned long)(n))>>16)&0xFFF8)
-
-/*-----------------------------------------------------------------------------+
-| SDRAM Read DQS Delay Control Register
-+-----------------------------------------------------------------------------*/
-#define SDRAM_RQDC_RQDE_MASK 0x80000000
-#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
-#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
-#define SDRAM_RQDC_RQFD_MASK 0x000001FF
-#define SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
-
-#define SDRAM_RQDC_RQFD_MAX 0x1FF
-
-/*-----------------------------------------------------------------------------+
-| SDRAM Read Data Capture Control Register
-+-----------------------------------------------------------------------------*/
-#define SDRAM_RDCC_RDSS_MASK 0xC0000000
-#define SDRAM_RDCC_RDSS_T1 0x00000000
-#define SDRAM_RDCC_RDSS_T2 0x40000000
-#define SDRAM_RDCC_RDSS_T3 0x80000000
-#define SDRAM_RDCC_RDSS_T4 0xC0000000
-#define SDRAM_RDCC_RSAE_MASK 0x00000001
-#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
-#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
-
-/*-----------------------------------------------------------------------------+
-| SDRAM Read Feedback Delay Control Register
-+-----------------------------------------------------------------------------*/
-#define SDRAM_RFDC_ARSE_MASK 0x80000000
-#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
-#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
-#define SDRAM_RFDC_RFOS_MASK 0x007F0000
-#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define SDRAM_RFDC_RFFD_MASK 0x000003FF
-#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-
-#define SDRAM_RFDC_RFFD_MAX 0x7FF
-
-/*-----------------------------------------------------------------------------+
-| SDRAM Delay Line Calibration Register
-+-----------------------------------------------------------------------------*/
-#define SDRAM_DLCR_DCLM_MASK 0x80000000
-#define SDRAM_DLCR_DCLM_MANUEL 0x80000000
-#define SDRAM_DLCR_DCLM_AUTO 0x00000000
-#define SDRAM_DLCR_DLCR_MASK 0x08000000
-#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
-#define SDRAM_DLCR_DLCR_IDLE 0x00000000
-#define SDRAM_DLCR_DLCS_MASK 0x07000000
-#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
-#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
-#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
-#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
-#define SDRAM_DLCR_DLCS_ERROR 0x04000000
-#define SDRAM_DLCR_DLCV_MASK 0x000001FF
-#define SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
-#define SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF)
-
-/*-----------------------------------------------------------------------------+
-| SDRAM Controller On Die Termination Register
-+-----------------------------------------------------------------------------*/
-#define SDRAM_CODT_ODT_ON 0x80000000
-#define SDRAM_CODT_ODT_OFF 0x00000000
-#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK 0x00000020
-#define SDRAM_CODT_DQS_2_5_V_DDR1 0x00000000
-#define SDRAM_CODT_DQS_1_8_V_DDR2 0x00000020
-#define SDRAM_CODT_DQS_MASK 0x00000010
-#define SDRAM_CODT_DQS_DIFFERENTIAL 0x00000000
-#define SDRAM_CODT_DQS_SINGLE_END 0x00000010
-#define SDRAM_CODT_CKSE_DIFFERENTIAL 0x00000000
-#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008
-#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004
-#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002
-#define SDRAM_CODT_IO_HIZ 0x00000000
-#define SDRAM_CODT_IO_NMODE 0x00000001
-
-/*-----------------------------------------------------------------------------+
-| SDRAM Mode Register
-+-----------------------------------------------------------------------------*/
-#define SDRAM_MMODE_WR_MASK 0x00000E00
-#define SDRAM_MMODE_WR_DDR1 0x00000000
-#define SDRAM_MMODE_WR_DDR2_3_CYC 0x00000400
-#define SDRAM_MMODE_WR_DDR2_4_CYC 0x00000600
-#define SDRAM_MMODE_WR_DDR2_5_CYC 0x00000800
-#define SDRAM_MMODE_WR_DDR2_6_CYC 0x00000A00
-#define SDRAM_MMODE_DCL_MASK 0x00000070
-#define SDRAM_MMODE_DCL_DDR1_2_0_CLK 0x00000020
-#define SDRAM_MMODE_DCL_DDR1_2_5_CLK 0x00000060
-#define SDRAM_MMODE_DCL_DDR1_3_0_CLK 0x00000030
-#define SDRAM_MMODE_DCL_DDR2_2_0_CLK 0x00000020
-#define SDRAM_MMODE_DCL_DDR2_3_0_CLK 0x00000030
-#define SDRAM_MMODE_DCL_DDR2_4_0_CLK 0x00000040
-#define SDRAM_MMODE_DCL_DDR2_5_0_CLK 0x00000050
-#define SDRAM_MMODE_DCL_DDR2_6_0_CLK 0x00000060
-#define SDRAM_MMODE_DCL_DDR2_7_0_CLK 0x00000070
-
-/*-----------------------------------------------------------------------------+
-| SDRAM Extended Mode Register
-+-----------------------------------------------------------------------------*/
-#define SDRAM_MEMODE_DIC_MASK 0x00000002
-#define SDRAM_MEMODE_DIC_NORMAL 0x00000000
-#define SDRAM_MEMODE_DIC_WEAK 0x00000002
-#define SDRAM_MEMODE_DLL_MASK 0x00000001
-#define SDRAM_MEMODE_DLL_DISABLE 0x00000001
-#define SDRAM_MEMODE_DLL_ENABLE 0x00000000
-#define SDRAM_MEMODE_RTT_MASK 0x00000044
-#define SDRAM_MEMODE_RTT_DISABLED 0x00000000
-#define SDRAM_MEMODE_RTT_75OHM 0x00000004
-#define SDRAM_MEMODE_RTT_150OHM 0x00000040
-#define SDRAM_MEMODE_DQS_MASK 0x00000400
-#define SDRAM_MEMODE_DQS_DISABLE 0x00000400
-#define SDRAM_MEMODE_DQS_ENABLE 0x00000000
-
-/*-----------------------------------------------------------------------------+
-| SDRAM Clock Timing Register
-+-----------------------------------------------------------------------------*/
-#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
-#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
-#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
-
-/*-----------------------------------------------------------------------------+
-| SDRAM Write Timing Register
-+-----------------------------------------------------------------------------*/
-#define SDRAM_WRDTR_LLWP_MASK 0x10000000
-#define SDRAM_WRDTR_LLWP_DIS 0x10000000
-#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
-#define SDRAM_WRDTR_WTR_MASK 0x0E000000
-#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
-#define SDRAM_WRDTR_WTR_90_DEG_ADV 0x04000000
-#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
-#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
-
-/*-----------------------------------------------------------------------------+
-| SDRAM SDTR1 Options
-+-----------------------------------------------------------------------------*/
-#define SDRAM_SDTR1_LDOF_MASK 0x80000000
-#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
-#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
-#define SDRAM_SDTR1_RTW_MASK 0x00F00000
-#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
-#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
-#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
-#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
-#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
-#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
-#define SDRAM_SDTR1_RTRO_1_CLK 0x00001000
-#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
-
-/*-----------------------------------------------------------------------------+
-| SDRAM SDTR2 Options
-+-----------------------------------------------------------------------------*/
-#define SDRAM_SDTR2_RCD_MASK 0xF0000000
-#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
-#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
-#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
-#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
-#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
-#define SDRAM_SDTR2_WTR_MASK 0x0F000000
-#define SDRAM_SDTR2_WTR_1_CLK 0x01000000
-#define SDRAM_SDTR2_WTR_2_CLK 0x02000000
-#define SDRAM_SDTR2_WTR_3_CLK 0x03000000
-#define SDRAM_SDTR2_WTR_4_CLK 0x04000000
-#define SDRAM_SDTR3_WTR_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
-#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
-#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000
-#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000
-#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000
-#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000
-#define SDRAM_SDTR2_WPC_MASK 0x0000F000
-#define SDRAM_SDTR2_WPC_2_CLK 0x00002000
-#define SDRAM_SDTR2_WPC_3_CLK 0x00003000
-#define SDRAM_SDTR2_WPC_4_CLK 0x00004000
-#define SDRAM_SDTR2_WPC_5_CLK 0x00005000
-#define SDRAM_SDTR2_WPC_6_CLK 0x00006000
-#define SDRAM_SDTR3_WPC_ENCODE(n) ((((unsigned long)(n))&0xF)<<12)
-#define SDRAM_SDTR2_RPC_MASK 0x00000F00
-#define SDRAM_SDTR2_RPC_2_CLK 0x00000200
-#define SDRAM_SDTR2_RPC_3_CLK 0x00000300
-#define SDRAM_SDTR2_RPC_4_CLK 0x00000400
-#define SDRAM_SDTR2_RP_MASK 0x000000F0
-#define SDRAM_SDTR2_RP_3_CLK 0x00000030
-#define SDRAM_SDTR2_RP_4_CLK 0x00000040
-#define SDRAM_SDTR2_RP_5_CLK 0x00000050
-#define SDRAM_SDTR2_RP_6_CLK 0x00000060
-#define SDRAM_SDTR2_RP_7_CLK 0x00000070
-#define SDRAM_SDTR2_RRD_MASK 0x0000000F
-#define SDRAM_SDTR2_RRD_2_CLK 0x00000002
-#define SDRAM_SDTR2_RRD_3_CLK 0x00000003
-
-/*-----------------------------------------------------------------------------+
-| SDRAM SDTR3 Options
-+-----------------------------------------------------------------------------*/
-#define SDRAM_SDTR3_RAS_MASK 0x1F000000
-#define SDRAM_SDTR3_RAS_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define SDRAM_SDTR3_RC_MASK 0x001F0000
-#define SDRAM_SDTR3_RC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
-#define SDRAM_SDTR3_XCS_MASK 0x00001F00
-#define SDRAM_SDTR3_XCS 0x00000D00
-#define SDRAM_SDTR3_RFC_MASK 0x0000003F
-#define SDRAM_SDTR3_RFC_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
-
-/*-----------------------------------------------------------------------------+
-| Memory Bank 0-1 configuration
-+-----------------------------------------------------------------------------*/
-#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
-#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
-#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
-#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
-#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
-#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
-#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
-#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
-#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
-#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
-#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
-#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
-#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
-#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
-#endif /* CONFIG_440SPE */
-
/*-----------------------------------------------------------------------------
| External Bus Controller
+----------------------------------------------------------------------------*/
-#define EBC_DCR_BASE 0x12
-#define ebccfga (EBC_DCR_BASE+0x0) /* External bus controller addr reg */
-#define ebccfgd (EBC_DCR_BASE+0x1) /* External bus controller data reg */
/* values for ebccfga register - indirect addressing of these regs */
#define pb0cr 0x00 /* periph bank 0 config reg */
#define pb1cr 0x01 /* periph bank 1 config reg */
#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C)
#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* Pin Function Control Register 1 */
#define SDR0_PFC1 0x4101
#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
-#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
+#define GPT0_COMP6 0x00000098
+#define GPT0_COMP5 0x00000094
+#define GPT0_COMP4 0x00000090
+#define GPT0_COMP3 0x0000008C
+#define GPT0_COMP2 0x00000088
+#define GPT0_COMP1 0x00000084
+
+#define GPT0_MASK6 0x000000D8
+#define GPT0_MASK5 0x000000D4
+#define GPT0_MASK4 0x000000D0
+#define GPT0_MASK3 0x000000CC
+#define GPT0_MASK2 0x000000C8
+#define GPT0_MASK1 0x000000C4
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define SDR0_USB2D0CR 0x0320
#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
-/* CUST0 Customer Configuration Register0 */
-#define SDR0_CUST0 0x4000
-#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
-#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
-#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
-#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
-
-#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
-#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
-#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
-
-#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
-#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
-#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
-
-#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
-#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
-#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
-
-#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
-#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
-#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
-
-#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
-
-#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
-#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
-#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
-
-#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
-#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
-#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
-
-#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
-#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
-#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
-
/* CUST1 Customer Configuration Register1 */
#define SDR0_CUST1 0x4002
#define SDR0_CUST1_NDRSC_MASK 0xFFFF0000 /* NDRSC Device Read Count */
#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */
#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */
+#endif /* 440EP || 440GR || 440EPX || 440GRX */
+
/*-----------------------------------------------------------------------------
- | Internal SRAM
+ | L2 Cache
+----------------------------------------------------------------------------*/
-#define ISRAM0_DCR_BASE 0x380
-#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
-#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
-#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
-#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
-#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
-#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
-#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
-#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
+#if defined (CONFIG_440GX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define L2_CACHE_BASE 0x030
+#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
+#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
+#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */
+#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */
+#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */
+#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */
+#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
+#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
-#else
+#endif /* CONFIG_440GX */
/*-----------------------------------------------------------------------------
| Internal SRAM
+----------------------------------------------------------------------------*/
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define ISRAM0_DCR_BASE 0x380
+#else
#define ISRAM0_DCR_BASE 0x020
+#endif
#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
#define isram0_sb1cr (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/
#define isram0_sb2cr (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/
#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
-/*-----------------------------------------------------------------------------
- | L2 Cache
- +----------------------------------------------------------------------------*/
-#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define L2_CACHE_BASE 0x030
-#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
-#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
-#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */
-#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */
-#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */
-#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */
-#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
-#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+/* CUST0 Customer Configuration Register0 */
+#define SDR0_CUST0 0x4000
+#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
+#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
+#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
+#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
-#endif /* CONFIG_440GX */
-#endif /* !CONFIG_440EP !CONFIG_440GR*/
+#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
+#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
+#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
+
+#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
+#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
+#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
+
+#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
+#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
+#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
+
+#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
+#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
+#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
+
+#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
+
+#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
+#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
+#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
+
+#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
+#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
+#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
+
+#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
+#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
+#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
+#endif
/*-----------------------------------------------------------------------------
| On-Chip Buses
/*-----------------------------------------------------------------------------
| Clocking, Power Management and Chip Control
+----------------------------------------------------------------------------*/
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define CNTRL_DCR_BASE 0x160
+#else
#define CNTRL_DCR_BASE 0x0b0
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#endif
+
#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */
#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */
#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */
-#else
-#define cpc0_sr (CNTRL_DCR_BASE+0x00) /* CPM status register */
-#define cpc0_er (CNTRL_DCR_BASE+0x01) /* CPM enable register */
-#define cpc0_fr (CNTRL_DCR_BASE+0x02) /* CPM force register */
-#endif
#define cpc0_sys0 (CNTRL_DCR_BASE+0x30) /* System configuration reg 0 */
#define cpc0_sys1 (CNTRL_DCR_BASE+0x31) /* System configuration reg 1 */
/*-----------------------------------------------------------------------------
| Universal interrupt controller
+----------------------------------------------------------------------------*/
+#define UIC_SR 0x0 /* UIC status */
+#define UIC_ER 0x2 /* UIC enable */
+#define UIC_CR 0x3 /* UIC critical */
+#define UIC_PR 0x4 /* UIC polarity */
+#define UIC_TR 0x5 /* UIC triggering */
+#define UIC_MSR 0x6 /* UIC masked status */
+#define UIC_VR 0x7 /* UIC vector */
+#define UIC_VCR 0x8 /* UIC vector configuration */
+
#define UIC0_DCR_BASE 0xc0
#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */
#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */
#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define UIC2_DCR_BASE 0xe0
#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */
/*-----------------------------------------------------------------------------
| DMA
+----------------------------------------------------------------------------*/
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define DMA_DCR_BASE 0x200
+#else
#define DMA_DCR_BASE 0x100
+#endif
#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
#define dmasah0 (DMA_DCR_BASE+0x02) /* DMA source address high 0 */
#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
-#if defined(CONFIG_440GX)
-#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */
-#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */
-#endif /* CONFIG_440GX */
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */
+#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */
+#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table pointer reg */
+#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table pointer reg */
+#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table pointer reg */
#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */
#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */
+#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */
+#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */
+#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */
#endif /* CONFIG_440GX */
#define UIC_MAL_TXEOB UIC_MTE
#define UIC_MAL_RXEOB UIC_MRE
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define UIC_RSVD0 0x80000000 /* N/A - unused */
+#define UIC_U1 0x40000000 /* UART 1 */
+#define UIC_IIC0 0x20000000 /* IIC */
+#define UIC_IIC1 0x10000000 /* IIC */
+#define UIC_PIM 0x08000000 /* PCI inbound message */
+#define UIC_PCRW 0x04000000 /* PCI command register write */
+#define UIC_PPM 0x02000000 /* PCI power management */
+#define UIC_PCIVPD 0x01000000 /* PCI VPD */
+#define UIC_MSI0 0x00800000 /* PCI MSI level 0 */
+#define UIC_EIR0 0x00400000 /* External interrupt 0 */
+#define UIC_UIC2NC 0x00200000 /* UIC2 non-critical interrupt */
+#define UIC_UIC2C 0x00100000 /* UIC2 critical interrupt */
+#define UIC_D0 0x00080000 /* DMA channel 0 */
+#define UIC_D1 0x00040000 /* DMA channel 1 */
+#define UIC_D2 0x00020000 /* DMA channel 2 */
+#define UIC_D3 0x00010000 /* DMA channel 3 */
+#define UIC_UIC3NC 0x00008000 /* UIC3 non-critical interrupt */
+#define UIC_UIC3C 0x00004000 /* UIC3 critical interrupt */
+#define UIC_EIR1 0x00002000 /* External interrupt 1 */
+#define UIC_TRNGDA 0x00001000 /* TRNG data available */
+#define UIC_PKAR1 0x00000800 /* PKA ready (PKA[1]) */
+#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */
+#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */
+#define UIC_I2OID 0x00000100 /* I2O inbound door bell */
+#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */
+#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */
+#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */
+#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */
+#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */
+#define UIC_EIP94 0x00000004 /* Security EIP94 */
+#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
+#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+
#elif !defined(CONFIG_440SPE)
#define UIC_U0 0x80000000 /* UART 0 */
#define UIC_U1 0x40000000 /* UART 1 */
#define UIC_ETH1 0x00000002 /* Ethernet 1 */
#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define UIC_EIR2 0x80000000 /* External interrupt 2 */
+#define UIC_U0 0x40000000 /* UART 0 */
+#define UIC_SPI 0x20000000 /* SPI */
+#define UIC_TRNGAL 0x10000000 /* TRNG alarm */
+#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */
+#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
+#define UIC_NDFC 0x02000000 /* NDFC */
+#define UIC_EIPPKPSE 0x01000000 /* EIPPKP slave error */
+#define UIC_P0MSI1 0x00800000 /* PCI0 MSI level 1 */
+#define UIC_P0MSI2 0x00400000 /* PCI0 MSI level 2 */
+#define UIC_P0MSI3 0x00200000 /* PCI0 MSI level 3 */
+#define UIC_L2C 0x00100000 /* L2 cache */
+#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
+#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
+#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
+#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
+#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
+#define UIC_CT5 0x00004000 /* GPT compare timer 5 */
+#define UIC_CT6 0x00002000 /* GPT compare timer 6 */
+#define UIC_GPTDC 0x00001000 /* GPT decrementer pulse */
+#define UIC_EIR3 0x00000800 /* External interrupt 3 */
+#define UIC_EIR4 0x00000400 /* External interrupt 4 */
+#define UIC_DMAE 0x00000200 /* DMA error */
+#define UIC_I2OE 0x00000100 /* I2O error */
+#define UIC_SRE 0x00000080 /* Serial ROM error */
+#define UIC_P0AE 0x00000040 /* PCI0 asynchronous error */
+#define UIC_EIR5 0x00000020 /* External interrupt 5 */
+#define UIC_EIR6 0x00000010 /* External interrupt 6 */
+#define UIC_U2 0x00000008 /* UART 2 */
+#define UIC_U3 0x00000004 /* UART 3 */
+#define UIC_EIR7 0x00000002 /* External interrupt 7 */
+#define UIC_EIR8 0x00000001 /* External interrupt 8 */
+
#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define UIC_MS 0x80000000 /* MAL SERR */
#define UIC_RSVD30 0x00000002 /* Reserved */
#define UIC_RSVD31 0x00000001 /* Reserved */
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define UIC_TAH0 0x80000000 /* TAHOE 0 */
+#define UIC_TAH1 0x40000000 /* TAHOE 1 */
+#define UIC_EIR9 0x20000000 /* External interrupt 9 */
+#define UIC_MS 0x10000000 /* MAL SERR */
+#define UIC_MTDE 0x08000000 /* MAL TXDE */
+#define UIC_MRDE 0x04000000 /* MAL RXDE */
+#define UIC_MTE 0x02000000 /* MAL TXEOB */
+#define UIC_MRE 0x01000000 /* MAL RXEOB */
+#define UIC_MCTX0 0x00800000 /* MAL interrupt coalescence TX0 */
+#define UIC_MCTX1 0x00400000 /* MAL interrupt coalescence TX1 */
+#define UIC_MCTX2 0x00200000 /* MAL interrupt coalescence TX2 */
+#define UIC_MCTX3 0x00100000 /* MAL interrupt coalescence TX3 */
+#define UIC_MCTR0 0x00080000 /* MAL interrupt coalescence TR0 */
+#define UIC_MCTR1 0x00040000 /* MAL interrupt coalescence TR1 */
+#define UIC_MCTR2 0x00020000 /* MAL interrupt coalescence TR2 */
+#define UIC_MCTR3 0x00010000 /* MAL interrupt coalescence TR3 */
+#define UIC_ETH0 0x00008000 /* Ethernet 0 */
+#define UIC_ETH1 0x00004000 /* Ethernet 1 */
+#define UIC_ETH2 0x00002000 /* Ethernet 2 */
+#define UIC_ETH3 0x00001000 /* Ethernet 3 */
+#define UIC_EWU0 0x00000800 /* Ethernet 0 wakeup */
+#define UIC_EWU1 0x00000400 /* Ethernet 1 wakeup */
+#define UIC_EWU2 0x00000200 /* Ethernet 2 wakeup */
+#define UIC_EWU3 0x00000100 /* Ethernet 3 wakeup */
+#define UIC_EIR10 0x00000080 /* External interrupt 10 */
+#define UIC_EIR11 0x00000040 /* External interrupt 11 */
+#define UIC_RSVD2 0x00000020 /* Reserved */
+#define UIC_PLB4XAHB 0x00000010 /* PLB4XAHB / AHBARB error */
+#define UIC_OTG 0x00000008 /* USB2.0 OTG */
+#define UIC_EHCI 0x00000004 /* USB2.0 Host EHCI */
+#define UIC_OHCI 0x00000002 /* USB2.0 Host OHCI */
+#define UIC_OHCISMI 0x00000001 /* USB2.0 Host OHCI SMI */
+
#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */
#define UIC_EIR5 0x80000000 /* External interrupt 5 */
#define UICB0_UIC2CI 0x08000000 /* UIC2 Critical Interrupt */
#define UICB0_UIC2NCI 0x04000000 /* UIC2 Noncritical Interrupt */
-#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
- UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
+#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
+ UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
+
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
+#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
+#define UICB0_UIC2NCI 0x00200000 /* UIC2 Noncritical Interrupt */
+#define UICB0_UIC2CI 0x00100000 /* UIC2 Critical Interrupt */
+#define UICB0_UIC3NCI 0x00008000 /* UIC3 Noncritical Interrupt */
+#define UICB0_UIC3CI 0x00004000 /* UIC3 Critical Interrupt */
+
+#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \
+ UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI)
#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define UICB0_UIC1CI 0x00000000 /* UIC1 Critical Interrupt */
-#define UICB0_UIC1NCI 0x00000000 /* UIC1 Noncritical Interrupt */
-#define UICB0_UIC2CI 0x00000000 /* UIC2 Critical Interrupt */
-#define UICB0_UIC2NCI 0x00000000 /* UIC2 Noncritical Interrupt */
+#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
+#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
+#define UICB0_UIC2CI 0x00000004 /* UIC2 Critical Interrupt */
+#define UICB0_UIC2NCI 0x00000008 /* UIC2 Noncritical Interrupt */
+
+#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
+ UICB0_UIC1CI | UICB0_UIC2NCI)
-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
- UICB0_UIC1CI | UICB0_UIC2NCI)
+#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR)
+
+#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
+#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
+
+#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI)
#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
#define SDR0_CP440_NTO1_NTO1 0x00000002
#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1)
#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01)
-#define SDR0_CFGADDR 0x00E /*already defined line 277 */
-#define SDR0_CFGDATA 0x00F
-
#define SDR0_SDSTP0 0x0020
#define SDR0_SDSTP0_ENG_MASK 0x80000000
#define SDR0_MFR 0x4300
#endif /* CONFIG_440SPE */
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+/* Pin Function Control Register 0 (SDR0_PFC0) */
+#define SDR0_PFC0 0x4100
+#define SDR0_PFC0_DBG 0x00008000 /* debug enable */
+#define SDR0_PFC0_G49E 0x00004000 /* GPIO 49 enable */
+#define SDR0_PFC0_G50E 0x00002000 /* GPIO 50 enable */
+#define SDR0_PFC0_G51E 0x00001000 /* GPIO 51 enable */
+#define SDR0_PFC0_G52E 0x00000800 /* GPIO 52 enable */
+#define SDR0_PFC0_G53E 0x00000400 /* GPIO 53 enable */
+#define SDR0_PFC0_G54E 0x00000200 /* GPIO 54 enable */
+#define SDR0_PFC0_G55E 0x00000100 /* GPIO 55 enable */
+#define SDR0_PFC0_G56E 0x00000080 /* GPIO 56 enable */
+#define SDR0_PFC0_G57E 0x00000040 /* GPIO 57 enable */
+#define SDR0_PFC0_G58E 0x00000020 /* GPIO 58 enable */
+#define SDR0_PFC0_G59E 0x00000010 /* GPIO 59 enable */
+#define SDR0_PFC0_G60E 0x00000008 /* GPIO 60 enable */
+#define SDR0_PFC0_G61E 0x00000004 /* GPIO 61 enable */
+#define SDR0_PFC0_G62E 0x00000002 /* GPIO 62 enable */
+#define SDR0_PFC0_G63E 0x00000001 /* GPIO 63 enable */
+
+/* Pin Function Control Register 1 (SDR0_PFC1) */
+#define SDR0_PFC1 0x4101
+#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
+#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
+#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
+#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
+#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
+#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
+#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
+#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins*/
+#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins*/
+#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
+#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
+#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
+
+/* Ethernet PLL Configuration Register (SDR0_ETH_PLL) */
+#define SDR0_ETH_PLL 0x4102
+#define SDR0_ETH_PLL_PLLLOCK 0x80000000 /*Ethernet PLL lock indication*/
+#define SDR0_ETH_PLL_REF_CLK_SEL 0x10000000 /* Ethernet reference clock */
+#define SDR0_ETH_PLL_BYPASS 0x08000000 /* bypass mode enable */
+#define SDR0_ETH_PLL_STOPCLK 0x04000000 /* output clock disable */
+#define SDR0_ETH_PLL_TUNE_MASK 0x03FF0000 /* loop stability tuning bits */
+#define SDR0_ETH_PLL_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3ff)<<16)
+#define SDR0_ETH_PLL_MULTI_MASK 0x0000FF00 /* frequency multiplication */
+#define SDR0_ETH_PLL_MULTI_ENCODE(n) ((((unsigned long)(n))&0xff)<<8)
+#define SDR0_ETH_PLL_RANGEB_MASK 0x000000F0 /* PLLOUTB/C frequency */
+#define SDR0_ETH_PLL_RANGEB_ENCODE(n) ((((unsigned long)(n))&0x0f)<<4)
+#define SDR0_ETH_PLL_RANGEA_MASK 0x0000000F /* PLLOUTA frequency */
+#define SDR0_ETH_PLL_RANGEA_ENCODE(n) (((unsigned long)(n))&0x0f)
+
+/* Ethernet Configuration Register (SDR0_ETH_CFG) */
+#define SDR0_ETH_CFG 0x4103
+#define SDR0_ETH_CFG_SGMII3_LPBK 0x00800000 /* SGMII3 port loopback enable */
+#define SDR0_ETH_CFG_SGMII2_LPBK 0x00400000 /* SGMII2 port loopback enable */
+#define SDR0_ETH_CFG_SGMII1_LPBK 0x00200000 /* SGMII1 port loopback enable */
+#define SDR0_ETH_CFG_SGMII0_LPBK 0x00100000 /* SGMII0 port loopback enable */
+#define SDR0_ETH_CFG_SGMII_MASK 0x00070000 /* SGMII Mask */
+#define SDR0_ETH_CFG_SGMII2_ENABLE 0x00040000 /* SGMII2 port enable */
+#define SDR0_ETH_CFG_SGMII1_ENABLE 0x00020000 /* SGMII1 port enable */
+#define SDR0_ETH_CFG_SGMII0_ENABLE 0x00010000 /* SGMII0 port enable */
+#define SDR0_ETH_CFG_TAHOE1_BYPASS 0x00002000 /* TAHOE1 Bypass selector */
+#define SDR0_ETH_CFG_TAHOE0_BYPASS 0x00001000 /* TAHOE0 Bypass selector */
+#define SDR0_ETH_CFG_EMAC3_PHY_CLK_SEL 0x00000800 /* EMAC 3 PHY clock selector */
+#define SDR0_ETH_CFG_EMAC2_PHY_CLK_SEL 0x00000400 /* EMAC 2 PHY clock selector */
+#define SDR0_ETH_CFG_EMAC1_PHY_CLK_SEL 0x00000200 /* EMAC 1 PHY clock selector */
+#define SDR0_ETH_CFG_EMAC0_PHY_CLK_SEL 0x00000100 /* EMAC 0 PHY clock selector */
+#define SDR0_ETH_CFG_EMAC_2_1_SWAP 0x00000080 /* Swap EMAC2 with EMAC1 */
+#define SDR0_ETH_CFG_EMAC_0_3_SWAP 0x00000040 /* Swap EMAC0 with EMAC3 */
+#define SDR0_ETH_CFG_MDIO_SEL_MASK 0x00000030 /* MDIO source selector mask */
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC0 0x00000000 /* MDIO source - EMAC0 */
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC1 0x00000010 /* MDIO source - EMAC1 */
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC2 0x00000020 /* MDIO source - EMAC2 */
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC3 0x00000030 /* MDIO source - EMAC3 */
+#define SDR0_ETH_CFG_ZMII_MODE_MASK 0x0000000C /* ZMII bridge mode selector mask */
+#define SDR0_ETH_CFG_ZMII_SEL_MII 0x00000000 /* ZMII bridge mode - MII */
+#define SDR0_ETH_CFG_ZMII_SEL_SMII 0x00000004 /* ZMII bridge mode - SMII */
+#define SDR0_ETH_CFG_ZMII_SEL_RMII_10 0x00000008 /* ZMII bridge mode - RMII (10 Mbps) */
+#define SDR0_ETH_CFG_ZMII_SEL_RMII_100 0x0000000C /* ZMII bridge mode - RMII (100 Mbps) */
+#define SDR0_ETH_CFG_GMC1_BRIDGE_SEL 0x00000002 /* GMC Port 1 bridge selector */
+#define SDR0_ETH_CFG_GMC0_BRIDGE_SEL 0x00000001 /* GMC Port 0 bridge selector */
+
+#define SDR0_ETH_CFG_ZMII_MODE_SHIFT 4
+#define SDR0_ETH_CFG_ZMII_MII_MODE 0x00
+#define SDR0_ETH_CFG_ZMII_SMII_MODE 0x01
+#define SDR0_ETH_CFG_ZMII_RMII_MODE_10M 0x10
+#define SDR0_ETH_CFG_ZMII_RMII_MODE_100M 0x11
+
+/* Miscealleneaous Function Reg. (SDR0_MFR) */
+#define SDR0_MFR 0x4300
+#define SDR0_MFR_T0TxFL 0x00800000 /* force parity error TAHOE0 Tx FIFO bits 0:63 */
+#define SDR0_MFR_T0TxFH 0x00400000 /* force parity error TAHOE0 Tx FIFO bits 64:127 */
+#define SDR0_MFR_T1TxFL 0x00200000 /* force parity error TAHOE1 Tx FIFO bits 0:63 */
+#define SDR0_MFR_T1TxFH 0x00100000 /* force parity error TAHOE1 Tx FIFO bits 64:127 */
+#define SDR0_MFR_E0TxFL 0x00008000 /* force parity error EMAC0 Tx FIFO bits 0:63 */
+#define SDR0_MFR_E0TxFH 0x00004000 /* force parity error EMAC0 Tx FIFO bits 64:127 */
+#define SDR0_MFR_E0RxFL 0x00002000 /* force parity error EMAC0 Rx FIFO bits 0:63 */
+#define SDR0_MFR_E0RxFH 0x00001000 /* force parity error EMAC0 Rx FIFO bits 64:127 */
+#define SDR0_MFR_E1TxFL 0x00000800 /* force parity error EMAC1 Tx FIFO bits 0:63 */
+#define SDR0_MFR_E1TxFH 0x00000400 /* force parity error EMAC1 Tx FIFO bits 64:127 */
+#define SDR0_MFR_E1RxFL 0x00000200 /* force parity error EMAC1 Rx FIFO bits 0:63 */
+#define SDR0_MFR_E1RxFH 0x00000100 /* force parity error EMAC1 Rx FIFO bits 64:127 */
+#define SDR0_MFR_E2TxFL 0x00000080 /* force parity error EMAC2 Tx FIFO bits 0:63 */
+#define SDR0_MFR_E2TxFH 0x00000040 /* force parity error EMAC2 Tx FIFO bits 64:127 */
+#define SDR0_MFR_E2RxFL 0x00000020 /* force parity error EMAC2 Rx FIFO bits 0:63 */
+#define SDR0_MFR_E2RxFH 0x00000010 /* force parity error EMAC2 Rx FIFO bits 64:127 */
+#define SDR0_MFR_E3TxFL 0x00000008 /* force parity error EMAC3 Tx FIFO bits 0:63 */
+#define SDR0_MFR_E3TxFH 0x00000004 /* force parity error EMAC3 Tx FIFO bits 64:127 */
+#define SDR0_MFR_E3RxFL 0x00000002 /* force parity error EMAC3 Rx FIFO bits 0:63 */
+#define SDR0_MFR_E3RxFH 0x00000001 /* force parity error EMAC3 Rx FIFO bits 64:127 */
+
+/* EMACx TX Status Register (SDR0_EMACxTXST)*/
+#define SDR0_EMAC0TXST 0x4400
+#define SDR0_EMAC1TXST 0x4401
+#define SDR0_EMAC2TXST 0x4402
+#define SDR0_EMAC3TXST 0x4403
+
+#define SDR0_EMACxTXST_FUR 0x02000000 /* TX FIFO underrun */
+#define SDR0_EMACxTXST_BC 0x01000000 /* broadcase address */
+#define SDR0_EMACxTXST_MC 0x00800000 /* multicast address */
+#define SDR0_EMACxTXST_UC 0x00400000 /* unicast address */
+#define SDR0_EMACxTXST_FP 0x00200000 /* frame paused by control packet */
+#define SDR0_EMACxTXST_BFCS 0x00100000 /* bad FCS in the transmitted frame */
+#define SDR0_EMACxTXST_CPF 0x00080000 /* TX control pause frame */
+#define SDR0_EMACxTXST_CF 0x00040000 /* TX control frame */
+#define SDR0_EMACxTXST_MSIZ 0x00020000 /* 1024-maxsize bytes transmitted */
+#define SDR0_EMACxTXST_1023 0x00010000 /* 512-1023 bytes transmitted */
+#define SDR0_EMACxTXST_511 0x00008000 /* 256-511 bytes transmitted */
+#define SDR0_EMACxTXST_255 0x00004000 /* 128-255 bytes transmitted */
+#define SDR0_EMACxTXST_127 0x00002000 /* 65-127 bytes transmitted */
+#define SDR0_EMACxTXST_64 0x00001000 /* 64 bytes transmitted */
+#define SDR0_EMACxTXST_SQE 0x00000800 /* SQE indication */
+#define SDR0_EMACxTXST_LOC 0x00000400 /* loss of carrier sense */
+#define SDR0_EMACxTXST_IERR 0x00000080 /* EMAC internal error */
+#define SDR0_EMACxTXST_EDF 0x00000040 /* excessive deferral */
+#define SDR0_EMACxTXST_ECOL 0x00000020 /* excessive collisions */
+#define SDR0_EMACxTXST_LCOL 0x00000010 /* late collision */
+#define SDR0_EMACxTXST_DFFR 0x00000008 /* deferred frame */
+#define SDR0_EMACxTXST_MCOL 0x00000004 /* multiple collision frame */
+#define SDR0_EMACxTXST_SCOL 0x00000002 /* single collision frame */
+#define SDR0_EMACxTXST_TXOK 0x00000001 /* transmit OK */
+
+/* EMACx RX Status Register (SDR0_EMACxRXST)*/
+#define SDR0_EMAC0RXST 0x4404
+#define SDR0_EMAC1RXST 0x4405
+#define SDR0_EMAC2RXST 0x4406
+#define SDR0_EMAC3RXST 0x4407
+
+#define SDR0_EMACxRXST_FOR 0x20000000 /* RX FIFO overrun */
+#define SDR0_EMACxRXST_BC 0x10000000 /* broadcast address */
+#define SDR0_EMACxRXST_MC 0x08000000 /* multicast address */
+#define SDR0_EMACxRXST_UC 0x04000000 /* unicast address */
+#define SDR0_EMACxRXST_UPR_MASK 0x03800000 /* user priority field */
+#define SDR0_EMACxRXST_UPR_ENCODE(n) ((((unsigned long)(n))&0x07)<<23)
+#define SDR0_EMACxRXST_VLAN 0x00400000 /* RX VLAN tagged frame */
+#define SDR0_EMACxRXST_LOOP 0x00200000 /* received in loop-back mode */
+#define SDR0_EMACxRXST_UOP 0x00100000 /* RX unsupported opcode */
+#define SDR0_EMACxRXST_CPF 0x00080000 /* RX control pause frame */
+#define SDR0_EMACxRXST_CF 0x00040000 /* RX control frame*/
+#define SDR0_EMACxRXST_MSIZ 0x00020000 /* 1024-MaxSize bytes recieved*/
+#define SDR0_EMACxRXST_1023 0x00010000 /* 512-1023 bytes received */
+#define SDR0_EMACxRXST_511 0x00008000 /* 128-511 bytes received */
+#define SDR0_EMACxRXST_255 0x00004000 /* 128-255 bytes received */
+#define SDR0_EMACxRXST_127 0x00002000 /* 65-127 bytes received */
+#define SDR0_EMACxRXST_64 0x00001000 /* 64 bytes received */
+#define SDR0_EMACxRXST_RUNT 0x00000800 /* runt frame */
+#define SDR0_EMACxRXST_SEVT 0x00000400 /* short event */
+#define SDR0_EMACxRXST_AERR 0x00000200 /* alignment error */
+#define SDR0_EMACxRXST_SERR 0x00000100 /* received with symbol error */
+#define SDR0_EMACxRXST_BURST 0x00000040 /* received burst */
+#define SDR0_EMACxRXST_F2L 0x00000020 /* frame is to long */
+#define SDR0_EMACxRXST_OERR 0x00000010 /* out of range length error */
+#define SDR0_EMACxRXST_IERR 0x00000008 /* in range length error */
+#define SDR0_EMACxRXST_LOST 0x00000004 /* frame lost due to internal EMAC receive error */
+#define SDR0_EMACxRXST_BFCS 0x00000002 /* bad FCS in the recieved frame */
+#define SDR0_EMACxRXST_RXOK 0x00000001 /* Recieve OK */
+
+/* EMACx TX Status Register (SDR0_EMACxREJCNT)*/
+#define SDR0_EMAC0REJCNT 0x4408
+#define SDR0_EMAC1REJCNT 0x4409
+#define SDR0_EMAC2REJCNT 0x440A
+#define SDR0_EMAC3REJCNT 0x440B
+
+#define SDR0_DDR0 0x00E1
+#define SDR0_DDR0_DPLLRST 0x80000000
+#define SDR0_DDR0_DDRM_MASK 0x60000000
+#define SDR0_DDR0_DDRM_DDR1 0x20000000
+#define SDR0_DDR0_DDRM_DDR2 0x40000000
+#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29)
+#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03)
+#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0)
+#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF)
+
+#define AHB_TOP 0xA4
+#define AHB_BOT 0xA5
+#endif /* CONFIG_460EX || CONFIG_460GT */
#define SDR0_SDCS_SDD (0x80000000 >> 31)
#define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */
#define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define SDR0_SRST0 0x0200
+#define SDR0_SRST SDR0_SRST0 /* for compatability reasons */
+#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
+#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
+#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
+#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
+#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/transmitter 0 */
+#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/transmitter 1 */
+#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
+#define SDR0_SRST0_IIC1 0x01000000 /* Inter integrated circuit 1 */
+#define SDR0_SRST0_GPIO0 0x00800000 /* General purpose I/O 0 */
+#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
+#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
+#define SDR0_SRST0_PCI 0x00100000 /* PCI */
+#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
+#define SDR0_SRST0_IMU 0x00010000 /* I2O DMA */
+#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0*/
+#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1*/
+#define SDR0_SRST0_SRAM 0x00002000 /* Universal interrupt controller 0*/
+#define SDR0_SRST0_UIC2 0x00001000 /* Universal interrupt controller 2*/
+#define SDR0_SRST0_UIC3 0x00000800 /* Universal interrupt controller 3*/
+#define SDR0_SRST0_OCM 0x00000400 /* Universal interrupt controller 0*/
+#define SDR0_SRST0_UART2 0x00000200 /* Universal asynchronous receiver/transmitter 2 */
+#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
+#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
+#define SDR0_SRST0_L2CACHE 0x00000004 /* L2 Cache */
+#define SDR0_SRST0_UART3 0x00000002 /* Universal asynchronous receiver/transmitter 3 */
+#define SDR0_SRST0_GPIO1 0x00000001 /* General purpose I/O 1 */
+
+#define SDR0_SRST1 0x201
+#define SDR0_SRST1_RLL 0x80000000 /* SRIO RLL */
+#define SDR0_SRST1_SCP 0x40000000 /* Serial communications port */
+#define SDR0_SRST1_PLBARB 0x20000000 /* PLB Arbiter */
+#define SDR0_SRST1_EIPPKP 0x10000000 /* EIPPPKP */
+#define SDR0_SRST1_EIP94 0x08000000 /* EIP 94 */
+#define SDR0_SRST1_EMAC0 0x04000000 /* Ethernet media access controller 0 */
+#define SDR0_SRST1_EMAC1 0x02000000 /* Ethernet media access controller 1 */
+#define SDR0_SRST1_EMAC2 0x01000000 /* Ethernet media access controller 2 */
+#define SDR0_SRST1_EMAC3 0x00800000 /* Ethernet media access controller 3 */
+#define SDR0_SRST1_ZMII 0x00400000 /* Ethernet ZMII/RMII/SMII */
+#define SDR0_SRST1_RGMII0 0x00200000 /* Ethernet RGMII/RTBI 0 */
+#define SDR0_SRST1_RGMII1 0x00100000 /* Ethernet RGMII/RTBI 1 */
+#define SDR0_SRST1_DMA4 0x00080000 /* DMA to PLB4 */
+#define SDR0_SRST1_DMA4CH 0x00040000 /* DMA Channel to PLB4 */
+#define SDR0_SRST1_SATAPHY 0x00020000 /* Serial ATA PHY */
+#define SDR0_SRST1_SRIODEV 0x00010000 /* Serial Rapid IO core, PCS, and serdes */
+#define SDR0_SRST1_SRIOPCS 0x00008000 /* Serial Rapid IO core and PCS */
+#define SDR0_SRST1_NDFC 0x00004000 /* Nand flash controller */
+#define SDR0_SRST1_SRIOPLB 0x00002000 /* Serial Rapid IO PLB */
+#define SDR0_SRST1_ETHPLL 0x00001000 /* Ethernet PLL */
+#define SDR0_SRST1_TAHOE1 0x00000800 /* Ethernet Tahoe 1 */
+#define SDR0_SRST1_TAHOE0 0x00000400 /* Ethernet Tahoe 0 */
+#define SDR0_SRST1_SGMII0 0x00000200 /* Ethernet SGMII 0 */
+#define SDR0_SRST1_SGMII1 0x00000100 /* Ethernet SGMII 1 */
+#define SDR0_SRST1_SGMII2 0x00000080 /* Ethernet SGMII 2 */
+#define SDR0_SRST1_AHB 0x00000040 /* PLB4XAHB bridge */
+#define SDR0_SRST1_USBOTGPHY 0x00000020 /* USB 2.0 OTG PHY */
+#define SDR0_SRST1_USBOTG 0x00000010 /* USB 2.0 OTG controller */
+#define SDR0_SRST1_USBHOST 0x00000008 /* USB 2.0 Host controller */
+#define SDR0_SRST1_AHBDMAC 0x00000004 /* AHB DMA controller */
+#define SDR0_SRST1_AHBICM 0x00000002 /* AHB inter-connect matrix */
+#define SDR0_SRST1_SATA 0x00000001 /* Serial ATA controller */
+
+#define SDR0_PCI0 0x1c0 /* PCI Configuration Register */
+
#else
#define SDR0_SRST_BGO 0x80000000
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440GX) && \
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */
+#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */
+#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */
+#define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000 /* PLB Early Clock Divisor */
+#define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */
+#elif !defined (CONFIG_440GX) && \
!defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
!defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
!defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
/******************************************************************************
* GPIO macro register defines
******************************************************************************/
-#define GPIO0 0
-#define GPIO1 1
-
#if defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700)
#endif /* CONFIG_440GP */
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00)
#define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00)
-/* Offsets */
-#define GPIOx_OR 0x00 /* GPIO Output Register */
-#define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */
-#define GPIOx_OSL 0x08 /* GPIO Output Select Register (Bits 0-31) */
-#define GPIOx_OSH 0x0C /* GPIO Ouput Select Register (Bits 32-63) */
-#define GPIOx_TSL 0x10 /* GPIO Three-State Select Register (Bits 0-31) */
-#define GPIOx_TSH 0x14 /* GPIO Three-State Select Register (Bits 32-63) */
-#define GPIOx_ODR 0x18 /* GPIO Open drain Register */
-#define GPIOx_IR 0x1C /* GPIO Input Register */
-#define GPIOx_RR1 0x20 /* GPIO Receive Register 1 */
-#define GPIOx_RR2 0x24 /* GPIO Receive Register 2 */
-#define GPIOx_RR3 0x28 /* GPIO Receive Register 3 */
-#define GPIOx_IS1L 0x30 /* GPIO Input Select Register 1 (Bits 0-31) */
-#define GPIOx_IS1H 0x34 /* GPIO Input Select Register 1 (Bits 32-63) */
-#define GPIOx_IS2L 0x38 /* GPIO Input Select Register 2 (Bits 0-31) */
-#define GPIOx_IS2H 0x3C /* GPIO Input Select Register 2 (Bits 32-63) */
-#define GPIOx_IS3L 0x40 /* GPIO Input Select Register 3 (Bits 0-31) */
-#define GPIOx_IS3H 0x44 /* GPIO Input Select Register 3 (Bits 32-63) */
-
-#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO Output Register High or Low */
-#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO Three-state Control Reg High or Low */
-#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO Input register1 High or Low */
-#define GPIO_IS2(x) (x+GPIOx_IS2L) /* GPIO Input register2 High or Low */
-#define GPIO_IS3(x) (x+GPIOx_IS3L) /* GPIO Input register3 High or Low */
-
#define GPIO0_OR (GPIO0_BASE+0x0)
#define GPIO0_TCR (GPIO0_BASE+0x4)
#define GPIO0_OSRL (GPIO0_BASE+0x8)
#define GPIO1_ISR3H (GPIO1_BASE+0x44)
#endif
-/*
- * Macros for accessing the indirect EBC registers
- */
-#define mtebc(reg, data) do { mtdcr(ebccfga,reg);mtdcr(ebccfgd,data); } while (0)
-#define mfebc(reg, data) do { mtdcr(ebccfga,reg);data = mfdcr(ebccfgd); } while (0)
-
-/*
- * Macros for accessing the indirect SDRAM controller registers
- */
-#define mtsdram(reg, data) do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0)
-#define mfsdram(reg, data) do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0)
-
-/*
- * Macros for accessing the indirect clocking controller registers
- */
-#define mtclk(reg, data) do { mtdcr(clkcfga,reg);mtdcr(clkcfgd,data); } while (0)
-#define mfclk(reg, data) do { mtdcr(clkcfga,reg);data = mfdcr(clkcfgd); } while (0)
-
-/*
- * Macros for accessing the sdr controller registers
- */
-#define mtsdr(reg, data) do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } while (0)
-#define mfsdr(reg, data) do { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } while (0)
-
-/*
- * All 44x except 440GP have CPR registers (indirect DCR)
- */
-#if !defined(CONFIG_440GP)
-#define CPR0_CFGADDR 0x00C
-#define CPR0_CFGDATA 0x00D
-
-#define mtcpr(reg, data) do { \
- mtdcr(CPR0_CFGADDR, reg); \
- mtdcr(CPR0_CFGDATA, data); \
- } while (0)
-
-#define mfcpr(reg, data) do { \
- mtdcr(CPR0_CFGADDR, reg); \
- data = mfdcr(CPR0_CFGDATA); \
- } while (0)
-#endif
-
#ifndef __ASSEMBLY__
-typedef struct {
- unsigned long pllFwdDivA;
- unsigned long pllFwdDivB;
- unsigned long pllFbkDiv;
- unsigned long pllOpbDiv;
- unsigned long pllPciDiv;
- unsigned long pllExtBusDiv;
- unsigned long freqVCOMhz; /* in MHz */
- unsigned long freqProcessor;
- unsigned long freqTmrClk;
- unsigned long freqPLB;
- unsigned long freqOPB;
- unsigned long freqEPB;
- unsigned long freqPCI;
-#ifdef CONFIG_440SPE
- unsigned long freqDDR;
-#endif
- unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */
- unsigned long pciClkSync; /* PCI clock is synchronous */
-} PPC440_SYS_INFO;
-
static inline u32 get_mcsr(void)
{
u32 val;
#endif /* _ASMLANGUAGE */
-#define RESET_VECTOR 0xfffffffc
-#define CACHELINE_MASK (CFG_CACHELINE_SIZE - 1) /* Address mask for */
- /* cache line aligned data. */
-
#endif /* __PPC440_H__ */