#ifndef _PHY_H
#define _PHY_H
-#include <dm.h>
+#include <log.h>
+#include <phy_interface.h>
+#include <dm/ofnode.h>
+#include <dm/read.h>
+#include <linux/errno.h>
#include <linux/list.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/mdio.h>
-#include <phy_interface.h>
+
+struct udevice;
#define PHY_FIXED_ID 0xa5a55a5a
+#define PHY_NCSI_ID 0xbeefcafe
+
+/*
+ * There is no actual id for this.
+ * This is just a dummy id for gmii2rgmmi converter.
+ */
+#define PHY_GMII2RGMII_ID 0x5a5a5a5a
#define PHY_MAX_ADDR 32
PHY_100BT_FEATURES | \
PHY_DEFAULT_FEATURES)
+#define PHY_100BT1_FEATURES (SUPPORTED_TP | \
+ SUPPORTED_MII | \
+ SUPPORTED_100baseT_Full)
+
#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
PHY_1000BT_FEATURES)
u16 val);
struct list_head list;
+
+ /* driver private data */
+ ulong data;
};
struct phy_device {
int asym_pause;
};
+/**
+ * phy_read - Convenience function for reading a given PHY register
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to read
+ * @return: value for success or negative errno for failure
+ */
static inline int phy_read(struct phy_device *phydev, int devad, int regnum)
{
struct mii_dev *bus = phydev->bus;
+ if (!bus || !bus->read) {
+ debug("%s: No bus configured\n", __func__);
+ return -1;
+ }
+
return bus->read(bus, phydev->addr, devad, regnum);
}
+/**
+ * phy_write - Convenience function for writing a given PHY register
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ * @return: 0 for success or negative errno for failure
+ */
static inline int phy_write(struct phy_device *phydev, int devad, int regnum,
u16 val)
{
struct mii_dev *bus = phydev->bus;
+ if (!bus || !bus->write) {
+ debug("%s: No bus configured\n", __func__);
+ return -1;
+ }
+
return bus->write(bus, phydev->addr, devad, regnum, val);
}
+/**
+ * phy_mmd_start_indirect - Convenience function for writing MMD registers
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to write
+ * @return: None
+ */
static inline void phy_mmd_start_indirect(struct phy_device *phydev, int devad,
int regnum)
{
(devad | MII_MMD_CTRL_NOINCR));
}
+/**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @return: Value for success or negative errno for failure
+ */
static inline int phy_read_mmd(struct phy_device *phydev, int devad,
int regnum)
{
return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA);
}
+/**
+ * phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ * @return: 0 for success or negative errno for failure
+ */
static inline int phy_write_mmd(struct phy_device *phydev, int devad,
int regnum, u16 val)
{
return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val);
}
+/**
+ * phy_set_bits_mmd - Convenience function for setting bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to set
+ * @return: 0 for success or negative errno for failure
+ */
+static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad,
+ u32 regnum, u16 val)
+{
+ int value, ret;
+
+ value = phy_read_mmd(phydev, devad, regnum);
+ if (value < 0)
+ return value;
+
+ value |= val;
+
+ ret = phy_write_mmd(phydev, devad, regnum, value);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/**
+ * phy_clear_bits_mmd - Convenience function for clearing bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to clear
+ * @return: 0 for success or negative errno for failure
+ */
+static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad,
+ u32 regnum, u16 val)
+{
+ int value, ret;
+
+ value = phy_read_mmd(phydev, devad, regnum);
+ if (value < 0)
+ return value;
+
+ value &= ~val;
+
+ ret = phy_write_mmd(phydev, devad, regnum, value);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
#ifdef CONFIG_PHYLIB_10G
extern struct phy_driver gen10g_driver;
-/* For now, XGMII is the only 10G interface */
+/*
+ * List all 10G interfaces here, the assumption being that PHYs on these
+ * interfaces are C45
+ */
static inline int is_10g_interface(phy_interface_t interface)
{
- return interface == PHY_INTERFACE_MODE_XGMII;
+ return interface == PHY_INTERFACE_MODE_XGMII ||
+ interface == PHY_INTERFACE_MODE_USXGMII ||
+ interface == PHY_INTERFACE_MODE_10GBASER;
}
#endif
/**
* phy_init() - Initializes the PHY drivers
- *
* This function registers all available PHY drivers
*
- * @return 0 if OK, -ve on error
+ * @return: 0 if OK, -ve on error
*/
int phy_init(void);
/**
* phy_reset() - Resets the specified PHY
- *
* Issues a reset of the PHY and waits for it to complete
*
* @phydev: PHY to reset
- * @return 0 if OK, -ve on error
+ * @return: 0 if OK, -ve on error
*/
int phy_reset(struct phy_device *phydev);
/**
* phy_find_by_mask() - Searches for a PHY on the specified MDIO bus
- *
* The function checks the PHY addresses flagged in phy_mask and returns a
* phy_device pointer if it detects a PHY.
* This function should only be called if just one PHY is expected to be present
* @bus: MII/MDIO bus to scan
* @phy_mask: bitmap of PYH addresses to scan
* @interface: type of MAC-PHY interface
- * @return pointer to phy_device if a PHY is found, or NULL otherwise
+ * @return: pointer to phy_device if a PHY is found, or NULL otherwise
*/
struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask,
phy_interface_t interface);
+#ifdef CONFIG_PHY_FIXED
+
+/**
+ * fixed_phy_create() - create an unconnected fixed-link pseudo-PHY device
+ * @node: OF node for the container of the fixed-link node
+ *
+ * Description: Creates a struct phy_device based on a fixed-link of_node
+ * description. Can be used without phy_connect by drivers which do not expose
+ * a UCLASS_ETH udevice.
+ */
+struct phy_device *fixed_phy_create(ofnode node);
+
+#else
+
+static inline struct phy_device *fixed_phy_create(ofnode node)
+{
+ return NULL;
+}
+
+#endif
+
#ifdef CONFIG_DM_ETH
/**
/**
* phy_connect() - Creates a PHY device for the Ethernet interface
- *
* Creates a PHY device for the PHY at the given address, if one doesn't exist
* already, and associates it with the Ethernet device.
* The function may be called with addr <= 0, in this case addr value is ignored
* @addr: PHY address on MDIO bus
* @dev: Ethernet device to associate to the PHY
* @interface: type of MAC-PHY interface
- * @return pointer to phy_device if a PHY is found, or NULL otherwise
+ * @return: pointer to phy_device if a PHY is found, or NULL otherwise
*/
struct phy_device *phy_connect(struct mii_dev *bus, int addr,
struct udevice *dev,
phy_interface_t interface);
+/**
+ * phy_device_create() - Create a PHY device
+ *
+ * @bus: MII/MDIO bus that hosts the PHY
+ * @addr: PHY address on MDIO bus
+ * @phy_id: where to store the ID retrieved
+ * @is_c45: Device Identifiers if is_c45
+ * @interface: interface between the MAC and PHY
+ * @return: pointer to phy_device if a PHY is found, or NULL otherwise
+ */
+struct phy_device *phy_device_create(struct mii_dev *bus, int addr,
+ u32 phy_id, bool is_c45,
+ phy_interface_t interface);
+
+/**
+ * phy_connect_phy_id() - Connect to phy device by reading PHY id
+ * from phy node.
+ *
+ * @bus: MII/MDIO bus that hosts the PHY
+ * @dev: Ethernet device to associate to the PHY
+ * @interface: Interface between the MAC and PHY
+ * @return: pointer to phy_device if a PHY is found,
+ * or NULL otherwise
+ */
+struct phy_device *phy_connect_phy_id(struct mii_dev *bus, struct udevice *dev,
+ phy_interface_t interface);
static inline ofnode phy_get_ofnode(struct phy_device *phydev)
{
/**
* phy_connect() - Creates a PHY device for the Ethernet interface
- *
* Creates a PHY device for the PHY at the given address, if one doesn't exist
* already, and associates it with the Ethernet device.
* The function may be called with addr <= 0, in this case addr value is ignored
* @addr: PHY address on MDIO bus
* @dev: Ethernet device to associate to the PHY
* @interface: type of MAC-PHY interface
- * @return pointer to phy_device if a PHY is found, or NULL otherwise
+ * @return: pointer to phy_device if a PHY is found, or NULL otherwise
*/
struct phy_device *phy_connect(struct mii_dev *bus, int addr,
struct eth_device *dev,
int phy_atheros_init(void);
int phy_broadcom_init(void);
int phy_cortina_init(void);
+int phy_cortina_access_init(void);
int phy_davicom_init(void);
int phy_et1011c_init(void);
int phy_lxt_init(void);
int phy_micrel_ksz90x1_init(void);
int phy_meson_gxl_init(void);
int phy_natsemi_init(void);
+int phy_nxp_tja11xx_init(void);
int phy_realtek_init(void);
int phy_smsc_init(void);
int phy_teranetics_init(void);
int phy_xilinx_init(void);
int phy_mscc_init(void);
int phy_fixed_init(void);
+int phy_ncsi_init(void);
+int phy_xilinx_gmii2rgmii_init(void);
int board_phy_config(struct phy_device *phydev);
int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id);
* phy_get_interface_by_name() - Look up a PHY interface name
*
* @str: PHY interface name, e.g. "mii"
- * @return PHY_INTERFACE_MODE_... value, or -1 if not found
+ * @return: PHY_INTERFACE_MODE_... value, or -1 if not found
*/
int phy_get_interface_by_name(const char *str);
* phy_interface_is_rgmii - Convenience function for testing if a PHY interface
* is RGMII (all variants)
* @phydev: the phy_device struct
+ * @return: true if MII bus is RGMII or false if it is not
*/
static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
{
* phy_interface_is_sgmii - Convenience function for testing if a PHY interface
* is SGMII (all variants)
* @phydev: the phy_device struct
+ * @return: true if MII bus is SGMII or false if it is not
*/
static inline bool phy_interface_is_sgmii(struct phy_device *phydev)
{
}
/* PHY UIDs for various PHYs that are referenced in external code */
-#define PHY_UID_CS4340 0x13e51002
-#define PHY_UID_CS4223 0x03e57003
+#define PHY_UID_CS4340 0x13e51002
+#define PHY_UID_CS4223 0x03e57003
#define PHY_UID_TN2020 0x00a19410
#define PHY_UID_IN112525_S03 0x02107440
projects / platform / kernel / u-boot.git / blobdiff