struct phy_driver *drv;
void *priv;
-#ifdef CONFIG_DM_ETH
struct udevice *dev;
ofnode node;
-#else
- struct eth_device *dev;
-#endif
/* forced speed & duplex (no autoneg)
* partner speed & duplex & pause (autoneg)
int asym_pause;
};
-/**
- * phy_read - Convenience function for reading a given PHY register
- * @phydev: the phy_device struct
- * @devad: The MMD to read from
- * @regnum: register number to read
- * @return: value for success or negative errno for failure
- */
-static inline int phy_read(struct phy_device *phydev, int devad, int regnum)
-{
- struct mii_dev *bus = phydev->bus;
-
- if (!bus || !bus->read) {
- debug("%s: No bus configured\n", __func__);
- return -1;
- }
-
- return bus->read(bus, phydev->addr, devad, regnum);
-}
-
-/**
- * phy_write - Convenience function for writing a given PHY register
- * @phydev: the phy_device struct
- * @devad: The MMD to read from
- * @regnum: register number to write
- * @val: value to write to @regnum
- * @return: 0 for success or negative errno for failure
- */
-static inline int phy_write(struct phy_device *phydev, int devad, int regnum,
- u16 val)
-{
- struct mii_dev *bus = phydev->bus;
-
- if (!bus || !bus->write) {
- debug("%s: No bus configured\n", __func__);
- return -1;
- }
-
- return bus->write(bus, phydev->addr, devad, regnum, val);
-}
-
-/**
- * phy_mmd_start_indirect - Convenience function for writing MMD registers
- * @phydev: the phy_device struct
- * @devad: The MMD to read from
- * @regnum: register number to write
- * @return: None
- */
-static inline void phy_mmd_start_indirect(struct phy_device *phydev, int devad,
- int regnum)
-{
- /* Write the desired MMD Devad */
- phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL, devad);
-
- /* Write the desired MMD register address */
- phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, regnum);
-
- /* Select the Function : DATA with no post increment */
- phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL,
- (devad | MII_MMD_CTRL_NOINCR));
-}
-
-/**
- * phy_read_mmd - Convenience function for reading a register
- * from an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from
- * @regnum: The register on the MMD to read
- * @return: Value for success or negative errno for failure
- */
-static inline int phy_read_mmd(struct phy_device *phydev, int devad,
- int regnum)
-{
- struct phy_driver *drv = phydev->drv;
-
- if (regnum > (u16)~0 || devad > 32)
- return -EINVAL;
-
- /* driver-specific access */
- if (drv->read_mmd)
- return drv->read_mmd(phydev, devad, regnum);
-
- /* direct C45 / C22 access */
- if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
- devad == MDIO_DEVAD_NONE || !devad)
- return phy_read(phydev, devad, regnum);
-
- /* indirect C22 access */
- phy_mmd_start_indirect(phydev, devad, regnum);
-
- /* Read the content of the MMD's selected register */
- return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA);
-}
-
-/**
- * phy_write_mmd - Convenience function for writing a register
- * on an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from
- * @regnum: The register on the MMD to read
- * @val: value to write to @regnum
- * @return: 0 for success or negative errno for failure
- */
-static inline int phy_write_mmd(struct phy_device *phydev, int devad,
- int regnum, u16 val)
-{
- struct phy_driver *drv = phydev->drv;
-
- if (regnum > (u16)~0 || devad > 32)
- return -EINVAL;
-
- /* driver-specific access */
- if (drv->write_mmd)
- return drv->write_mmd(phydev, devad, regnum, val);
-
- /* direct C45 / C22 access */
- if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
- devad == MDIO_DEVAD_NONE || !devad)
- return phy_write(phydev, devad, regnum, val);
-
- /* indirect C22 access */
- phy_mmd_start_indirect(phydev, devad, regnum);
-
- /* Write the data into MMD's selected register */
- return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val);
-}
-
-/**
- * phy_set_bits_mmd - Convenience function for setting bits in a register
- * on MMD
- * @phydev: the phy_device struct
- * @devad: the MMD containing register to modify
- * @regnum: register number to modify
- * @val: bits to set
- * @return: 0 for success or negative errno for failure
- */
-static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad,
- u32 regnum, u16 val)
-{
- int value, ret;
-
- value = phy_read_mmd(phydev, devad, regnum);
- if (value < 0)
- return value;
-
- value |= val;
-
- ret = phy_write_mmd(phydev, devad, regnum, value);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-/**
- * phy_clear_bits_mmd - Convenience function for clearing bits in a register
- * on MMD
- * @phydev: the phy_device struct
- * @devad: the MMD containing register to modify
- * @regnum: register number to modify
- * @val: bits to clear
- * @return: 0 for success or negative errno for failure
- */
-static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad,
- u32 regnum, u16 val)
-{
- int value, ret;
-
- value = phy_read_mmd(phydev, devad, regnum);
- if (value < 0)
- return value;
-
- value &= ~val;
-
- ret = phy_write_mmd(phydev, devad, regnum, value);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
#ifdef CONFIG_PHYLIB_10G
extern struct phy_driver gen10g_driver;
-
-/*
- * List all 10G interfaces here, the assumption being that PHYs on these
- * interfaces are C45
- */
-static inline int is_10g_interface(phy_interface_t interface)
-{
- return interface == PHY_INTERFACE_MODE_XGMII ||
- interface == PHY_INTERFACE_MODE_USXGMII ||
- interface == PHY_INTERFACE_MODE_10GBASER;
-}
-
#endif
/**
*
* @bus: MII/MDIO bus to scan
* @phy_mask: bitmap of PYH addresses to scan
- * @interface: type of MAC-PHY interface
* @return: pointer to phy_device if a PHY is found, or NULL otherwise
*/
-struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask,
- phy_interface_t interface);
+struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask);
#ifdef CONFIG_PHY_FIXED
#endif
-#ifdef CONFIG_DM_ETH
-
/**
* phy_connect_dev() - Associates the given pair of PHY and Ethernet devices
* @phydev: PHY device
* @dev: Ethernet device
+ * @interface: type of MAC-PHY interface
*/
-void phy_connect_dev(struct phy_device *phydev, struct udevice *dev);
+void phy_connect_dev(struct phy_device *phydev, struct udevice *dev,
+ phy_interface_t interface);
/**
* phy_connect() - Creates a PHY device for the Ethernet interface
* @addr: PHY address on MDIO bus
* @phy_id: where to store the ID retrieved
* @is_c45: Device Identifiers if is_c45
- * @interface: interface between the MAC and PHY
* @return: pointer to phy_device if a PHY is found, or NULL otherwise
*/
struct phy_device *phy_device_create(struct mii_dev *bus, int addr,
- u32 phy_id, bool is_c45,
- phy_interface_t interface);
+ u32 phy_id, bool is_c45);
/**
* phy_connect_phy_id() - Connect to phy device by reading PHY id
*
* @bus: MII/MDIO bus that hosts the PHY
* @dev: Ethernet device to associate to the PHY
- * @interface: Interface between the MAC and PHY
* @return: pointer to phy_device if a PHY is found,
* or NULL otherwise
*/
struct phy_device *phy_connect_phy_id(struct mii_dev *bus, struct udevice *dev,
- phy_interface_t interface);
+ int phyaddr);
static inline ofnode phy_get_ofnode(struct phy_device *phydev)
{
else
return dev_ofnode(phydev->dev);
}
-#else
-
-/**
- * phy_connect_dev() - Associates the given pair of PHY and Ethernet devices
- * @phydev: PHY device
- * @dev: Ethernet device
- */
-void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev);
-/**
- * phy_connect() - Creates a PHY device for the Ethernet interface
- * Creates a PHY device for the PHY at the given address, if one doesn't exist
- * already, and associates it with the Ethernet device.
- * The function may be called with addr <= 0, in this case addr value is ignored
- * and the bus is scanned to detect a PHY. Scanning should only be used if only
- * one PHY is expected to be present on the MDIO bus, otherwise it is undefined
- * which PHY is returned.
- *
- * @bus: MII/MDIO bus that hosts the PHY
- * @addr: PHY address on MDIO bus
- * @dev: Ethernet device to associate to the PHY
- * @interface: type of MAC-PHY interface
- * @return: pointer to phy_device if a PHY is found, or NULL otherwise
- */
-struct phy_device *phy_connect(struct mii_dev *bus, int addr,
- struct eth_device *dev,
- phy_interface_t interface);
+int phy_read(struct phy_device *phydev, int devad, int regnum);
+int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val);
+void phy_mmd_start_indirect(struct phy_device *phydev, int devad, int regnum);
+int phy_read_mmd(struct phy_device *phydev, int devad, int regnum);
+int phy_write_mmd(struct phy_device *phydev, int devad, int regnum, u16 val);
+int phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
+int phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
-static inline ofnode phy_get_ofnode(struct phy_device *phydev)
-{
- return ofnode_null();
-}
-#endif
int phy_startup(struct phy_device *phydev);
int phy_config(struct phy_device *phydev);
int phy_shutdown(struct phy_device *phydev);
int phy_register(struct phy_driver *drv);
int phy_set_supported(struct phy_device *phydev, u32 max_speed);
+int phy_modify(struct phy_device *phydev, int devad, int regnum, u16 mask,
+ u16 set);
int genphy_config_aneg(struct phy_device *phydev);
int genphy_restart_aneg(struct phy_device *phydev);
int genphy_update_link(struct phy_device *phydev);
int phy_b53_init(void);
int phy_mv88e61xx_init(void);
+int phy_adin_init(void);
int phy_aquantia_init(void);
int phy_atheros_init(void);
int phy_broadcom_init(void);
int phy_micrel_ksz90x1_init(void);
int phy_meson_gxl_init(void);
int phy_natsemi_init(void);
+int phy_nxp_c45_tja11xx_init(void);
int phy_nxp_tja11xx_init(void);
int phy_realtek_init(void);
int phy_smsc_init(void);
int phy_ti_init(void);
int phy_vitesse_init(void);
int phy_xilinx_init(void);
+int phy_xway_init(void);
int phy_mscc_init(void);
int phy_fixed_init(void);
int phy_ncsi_init(void);
int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id);
/**
- * phy_get_interface_by_name() - Look up a PHY interface name
- *
- * @str: PHY interface name, e.g. "mii"
- * @return: PHY_INTERFACE_MODE_... value, or -1 if not found
- */
-int phy_get_interface_by_name(const char *str);
-
-/**
* phy_interface_is_rgmii - Convenience function for testing if a PHY interface
* is RGMII (all variants)
* @phydev: the phy_device struct
phydev->interface <= PHY_INTERFACE_MODE_QSGMII;
}
+bool phy_interface_is_ncsi(void);
+
/* PHY UIDs for various PHYs that are referenced in external code */
#define PHY_UID_CS4340 0x13e51002
#define PHY_UID_CS4223 0x03e57003
projects / platform / kernel / u-boot.git / blobdiff