* Under PCI, each device has 256 bytes of configuration address space,
* of which the first 64 bytes are standardized as follows:
*/
+#define PCI_STD_HEADER_SIZEOF 64
#define PCI_VENDOR_ID 0x00 /* 16 bits */
#define PCI_DEVICE_ID 0x02 /* 16 bits */
#define PCI_COMMAND 0x04 /* 16 bits */
#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */
#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */
-/* From 440ep */
-#define PCI_ERREN 0x48 /* Error Enable */
-#define PCI_ERRSTS 0x49 /* Error Status */
-#define PCI_BRDGOPT1 0x4A /* PCI Bridge Options 1 */
-#define PCI_PLBSESR0 0x4C /* PCI PLB Slave Error Syndrome 0 */
-#define PCI_PLBSESR1 0x50 /* PCI PLB Slave Error Syndrome 1 */
-#define PCI_PLBSEAR 0x54 /* PCI PLB Slave Error Address */
-#define PCI_CAPID 0x58 /* Capability Identifier */
-#define PCI_NEXTITEMPTR 0x59 /* Next Item Pointer */
-#define PCI_PMC 0x5A /* Power Management Capabilities */
-#define PCI_PMCSR 0x5C /* Power Management Control Status */
-#define PCI_PMCSRBSE 0x5E /* PMCSR PCI to PCI Bridge Support Extensions */
-#define PCI_BRDGOPT2 0x60 /* PCI Bridge Options 2 */
-#define PCI_PMSCRR 0x64 /* Power Management State Change Request Re. */
-
/* Header type 2 (CardBus bridges) */
#define PCI_CB_CAPABILITY_LIST 0x14
/* 0x15 reserved */
#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */
#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
-#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
+#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
+#define PCI_CAP_ID_HT 0x08 /* HyperTransport */
+#define PCI_CAP_ID_VNDR 0x09 /* Vendor-Specific */
+#define PCI_CAP_ID_DBG 0x0A /* Debug port */
+#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */
+#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
+#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */
+#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */
+#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */
+#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
+#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
+#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */
+#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */
+#define PCI_CAP_ID_EA 0x14 /* PCI Enhanced Allocation */
+#define PCI_CAP_ID_MAX PCI_CAP_ID_EA
#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
#define PCI_CAP_SIZEOF 4
#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */
#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */
#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */
+#define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */
+#define PCI_EXT_CAP_ID_L1SS 0x1E /* L1 PM Substates */
+#define PCI_EXT_CAP_ID_PTM 0x1F /* Precision Time Measurement */
+#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PTM
/* Include the ID list */
void pciauto_region_init(struct pci_region *res);
void pciauto_region_align(struct pci_region *res, pci_size_t size);
void pciauto_config_init(struct pci_controller *hose);
+
+/**
+ * pciauto_region_allocate() - Allocate resources from a PCI resource region
+ *
+ * Allocates @size bytes from the PCI resource @res. If @supports_64bit is
+ * false, the result will be guaranteed to fit in 32 bits.
+ *
+ * @res: PCI region to allocate from
+ * @size: Amount of bytes to allocate
+ * @bar: Returns the PCI bus address of the allocated resource
+ * @supports_64bit: Whether to allow allocations above the 32-bit boundary
+ * @return 0 if successful, -1 on failure
+ */
int pciauto_region_allocate(struct pci_region *res, pci_size_t size,
pci_addr_t *bar, bool supports_64bit);
*/
void *dm_pci_map_bar(struct udevice *dev, int bar, int flags);
+/**
+ * dm_pci_find_capability() - find a capability
+ *
+ * Tell if a device supports a given PCI capability. Returns the
+ * address of the requested capability structure within the device's
+ * PCI configuration space or 0 in case the device does not support it.
+ *
+ * Possible values for @cap:
+ *
+ * %PCI_CAP_ID_MSI Message Signalled Interrupts
+ * %PCI_CAP_ID_PCIX PCI-X
+ * %PCI_CAP_ID_EXP PCI Express
+ * %PCI_CAP_ID_MSIX MSI-X
+ *
+ * See PCI_CAP_ID_xxx for the complete capability ID codes.
+ *
+ * @dev: PCI device to query
+ * @cap: capability code
+ * @return: capability address or 0 if not supported
+ */
+int dm_pci_find_capability(struct udevice *dev, int cap);
+
+/**
+ * dm_pci_find_ext_capability() - find an extended capability
+ *
+ * Tell if a device supports a given PCI express extended capability.
+ * Returns the address of the requested extended capability structure
+ * within the device's PCI configuration space or 0 in case the device
+ * does not support it.
+ *
+ * Possible values for @cap:
+ *
+ * %PCI_EXT_CAP_ID_ERR Advanced Error Reporting
+ * %PCI_EXT_CAP_ID_VC Virtual Channel
+ * %PCI_EXT_CAP_ID_DSN Device Serial Number
+ * %PCI_EXT_CAP_ID_PWR Power Budgeting
+ *
+ * See PCI_EXT_CAP_ID_xxx for the complete extended capability ID codes.
+ *
+ * @dev: PCI device to query
+ * @cap: extended capability code
+ * @return: extended capability address or 0 if not supported
+ */
+int dm_pci_find_ext_capability(struct udevice *dev, int cap);
+
#define dm_pci_virt_to_bus(dev, addr, flags) \
dm_pci_phys_to_bus(dev, (virt_to_phys(addr)), (flags))
#define dm_pci_bus_to_virt(dev, addr, flags, len, map_flags) \
*
* @bus: PCI bus to search
* @find_devfn: PCI device and function address (PCI_DEVFN())
+ * @containerp: Returns container device if found
* @emulp: Returns emulated device if found
* @return 0 if found, -ENODEV if not found
*/
int sandbox_pci_get_emul(struct udevice *bus, pci_dev_t find_devfn,
- struct udevice **emulp);
+ struct udevice **containerp, struct udevice **emulp);
#endif /* CONFIG_DM_PCI */
projects / platform / kernel / u-boot.git / blobdiff