*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
int cpu_eth_init(bd_t *bis);
/* Driver initialization prototypes */
+int altera_tse_initialize(u8 dev_num, int mac_base,
+ int sgdma_rx_base, int sgdma_tx_base);
+int ax88180_initialize(bd_t *bis);
+int au1x00_enet_initialize(bd_t*);
+int at91emac_register(bd_t *bis, unsigned long iobase);
int bfin_EMAC_initialize(bd_t *bis);
+int cs8900_initialize(u8 dev_num, int base_addr);
+int dc21x4x_initialize(bd_t *bis);
+int davinci_emac_initialize(void);
+int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
+int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
+int e1000_initialize(bd_t *bis);
+int eepro100_initialize(bd_t *bis);
+int enc28j60_initialize(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode);
+int ep93xx_eth_initialize(u8 dev_num, int base_addr);
+int ethoc_initialize(u8 dev_num, int base_addr);
int eth_3com_initialize (bd_t * bis);
+int fec_initialize (bd_t *bis);
+int fecmxc_initialize (bd_t *bis);
+int ftgmac100_initialize(bd_t *bits);
+int ftmac100_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
+int inca_switch_initialize(bd_t *bis);
+int lan91c96_initialize(u8 dev_num, int base_addr);
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
int mcdmafec_initialize(bd_t *bis);
int mcffec_initialize(bd_t *bis);
+int mpc512x_fec_initialize(bd_t *bis);
+int mpc5xxx_fec_initialize(bd_t *bis);
+int mpc8220_fec_initialize(bd_t *bis);
+int mpc82xx_scc_enet_initialize(bd_t *bis);
+int mvgbe_initialize(bd_t *bis);
int natsemi_initialize(bd_t *bis);
+int npe_initialize(bd_t *bis);
int ns8382x_initialize(bd_t *bis);
int pcnet_initialize(bd_t *bis);
+int plb2800_eth_initialize(bd_t *bis);
+int ppc_4xx_eth_initialize (bd_t *bis);
int rtl8139_initialize(bd_t *bis);
int rtl8169_initialize(bd_t *bis);
+int scc_initialize(bd_t *bis);
int skge_initialize(bd_t *bis);
+int smc911x_initialize(u8 dev_num, int base_addr);
+int smc91111_initialize(u8 dev_num, int base_addr);
int tsi108_eth_initialize(bd_t *bis);
+int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
+int xilinx_emaclite_initialize (bd_t *bis, int base_addr);
+int sh_eth_initialize(bd_t *bis);
+int dm9000_initialize(bd_t *bis);
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.
{
int num = 0;
+#ifdef CONFIG_PCI
+
+#ifdef CONFIG_EEPRO100
+ num += eepro100_initialize(bis);
+#endif
+#ifdef CONFIG_TULIP
+ num += dc21x4x_initialize(bis);
+#endif
+#ifdef CONFIG_E1000
+ num += e1000_initialize(bis);
+#endif
#ifdef CONFIG_PCNET
num += pcnet_initialize(bis);
#endif
#if defined(CONFIG_RTL8169)
num += rtl8169_initialize(bis);
#endif
-#if defined(CONFIG_ULI526)
+#if defined(CONFIG_ULI526X)
num += uli526x_initialize(bis);
#endif
+
+#endif /* CONFIG_PCI */
return num;
}
-#endif /* _NETDEV_H_ */
+/*
+ * Boards with mv88e61xx switch can use this by defining
+ * CONFIG_MV88E61XX_SWITCH in respective board configheader file
+ * the stuct and enums here are used to specify switch configuration params
+ */
+#if defined(CONFIG_MV88E61XX_SWITCH)
+enum mv88e61xx_cfg_vlan {
+ MV88E61XX_VLANCFG_DEFAULT,
+ MV88E61XX_VLANCFG_ROUTER
+};
+enum mv88e61xx_cfg_mdip {
+ MV88E61XX_MDIP_NOCHANGE,
+ MV88E61XX_MDIP_REVERSE
+};
+
+enum mv88e61xx_cfg_ledinit {
+ MV88E61XX_LED_INIT_DIS,
+ MV88E61XX_LED_INIT_EN
+};
+
+enum mv88e61xx_cfg_rgmiid {
+ MV88E61XX_RGMII_DELAY_DIS,
+ MV88E61XX_RGMII_DELAY_EN
+};
+
+enum mv88e61xx_cfg_prtstt {
+ MV88E61XX_PORTSTT_DISABLED,
+ MV88E61XX_PORTSTT_BLOCKING,
+ MV88E61XX_PORTSTT_LEARNING,
+ MV88E61XX_PORTSTT_FORWARDING
+};
+
+struct mv88e61xx_config {
+ char *name;
+ enum mv88e61xx_cfg_vlan vlancfg;
+ enum mv88e61xx_cfg_rgmiid rgmii_delay;
+ enum mv88e61xx_cfg_prtstt portstate;
+ enum mv88e61xx_cfg_ledinit led_init;
+ enum mv88e61xx_cfg_mdip mdip;
+ u32 ports_enabled;
+ u8 cpuport;
+};
+
+int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
+#endif /* CONFIG_MV88E61XX_SWITCH */
+
+#endif /* _NETDEV_H_ */