* limitations under the License.
*/
+
#ifndef __NET_CONNECTION_INTF_H__
#define __NET_CONNECTION_INTF_H__
+
#include "connection_profile.h"
+
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
+
/**
* @file net_connection.h
*/
+
/**
* @addtogroup CAPI_NETWORK_CONNECTION_MANAGER_MODULE
* @{
*/
+
/**
* @brief The connection handle.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef void* connection_h;
+
/**
* @brief The profiles iterator handle.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef void* connection_profile_iterator_h;
+
/**
* @brief Enumeration for connection type.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_TYPE_DISCONNECTED = 0, /**< Disconnected */
- CONNECTION_TYPE_WIFI = 1, /**< Wi-Fi type */
- CONNECTION_TYPE_CELLULAR = 2, /**< Cellular type */
- CONNECTION_TYPE_ETHERNET = 3, /**< Ethernet type */
- CONNECTION_TYPE_BT = 4, /**< Bluetooth type */
- CONNECTION_TYPE_NET_PROXY, /**< Proxy type for internet connection (Since 3.0) */
+typedef enum {
+ CONNECTION_TYPE_DISCONNECTED = 0, /**< Disconnected */
+ CONNECTION_TYPE_WIFI = 1, /**< Wi-Fi type */
+ CONNECTION_TYPE_CELLULAR = 2, /**< Cellular type */
+ CONNECTION_TYPE_ETHERNET = 3, /**< Ethernet type */
+ CONNECTION_TYPE_BT = 4, /**< Bluetooth type */
+ CONNECTION_TYPE_NET_PROXY, /**< Proxy type for internet connection (Since 3.0) */
} connection_type_e;
+
/**
* @brief Enumeration for cellular network state.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_CELLULAR_STATE_OUT_OF_SERVICE = 0, /**< Out of service */
- CONNECTION_CELLULAR_STATE_FLIGHT_MODE = 1, /**< Flight mode */
- CONNECTION_CELLULAR_STATE_ROAMING_OFF = 2, /**< Roaming is turned off */
- CONNECTION_CELLULAR_STATE_CALL_ONLY_AVAILABLE = 3, /**< Call is only available */
- CONNECTION_CELLULAR_STATE_AVAILABLE = 4, /**< Available but not connected yet */
- CONNECTION_CELLULAR_STATE_CONNECTED = 5, /**< Connected */
+typedef enum {
+ CONNECTION_CELLULAR_STATE_OUT_OF_SERVICE = 0, /**< Out of service */
+ CONNECTION_CELLULAR_STATE_FLIGHT_MODE = 1, /**< Flight mode */
+ CONNECTION_CELLULAR_STATE_ROAMING_OFF = 2, /**< Roaming is turned off */
+ CONNECTION_CELLULAR_STATE_CALL_ONLY_AVAILABLE = 3, /**< Call is only available */
+ CONNECTION_CELLULAR_STATE_AVAILABLE = 4, /**< Available but not connected yet */
+ CONNECTION_CELLULAR_STATE_CONNECTED = 5, /**< Connected */
} connection_cellular_state_e;
+
/**
* @brief Enumeration for Wi-Fi state.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_WIFI_STATE_DEACTIVATED = 0, /**< Wi-Fi is deactivated */
- CONNECTION_WIFI_STATE_DISCONNECTED = 1, /**< Disconnected */
- CONNECTION_WIFI_STATE_CONNECTED = 2, /**< Connected */
+typedef enum {
+ CONNECTION_WIFI_STATE_DEACTIVATED = 0, /**< Wi-Fi is deactivated */
+ CONNECTION_WIFI_STATE_DISCONNECTED = 1, /**< Disconnected */
+ CONNECTION_WIFI_STATE_CONNECTED = 2, /**< Connected */
} connection_wifi_state_e;
+
/**
* @brief Enumeration for ethernet state.
- * @since_tizen 2.4
+ * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
*/
-typedef enum
-{
- CONNECTION_ETHERNET_STATE_DEACTIVATED = 0, /**< There is no Ethernet profile to open */
- CONNECTION_ETHERNET_STATE_DISCONNECTED = 1, /**< Disconnected */
- CONNECTION_ETHERNET_STATE_CONNECTED = 2, /**< Connected */
+typedef enum {
+ CONNECTION_ETHERNET_STATE_DEACTIVATED = 0, /**< There is no Ethernet profile to open */
+ CONNECTION_ETHERNET_STATE_DISCONNECTED = 1, /**< Disconnected */
+ CONNECTION_ETHERNET_STATE_CONNECTED = 2, /**< Connected */
} connection_ethernet_state_e;
+
/**
* @brief Enumeration for Bluetooth state.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_BT_STATE_DEACTIVATED = 0, /**< There is no Bluetooth profile to open */
- CONNECTION_BT_STATE_DISCONNECTED = 1, /**< Disconnected */
- CONNECTION_BT_STATE_CONNECTED = 2, /**< Connected */
+typedef enum {
+ CONNECTION_BT_STATE_DEACTIVATED = 0, /**< There is no Bluetooth profile to open */
+ CONNECTION_BT_STATE_DISCONNECTED = 1, /**< Disconnected */
+ CONNECTION_BT_STATE_CONNECTED = 2, /**< Connected */
} connection_bt_state_e;
+
/**
* @brief Enumeration for connection iterator type.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_ITERATOR_TYPE_REGISTERED = 0, /**< The iterator of the registered profile */
- CONNECTION_ITERATOR_TYPE_CONNECTED = 1, /**< The iterator of the connected profile */
- CONNECTION_ITERATOR_TYPE_DEFAULT = 2, /**< The iterator of the default profile */
+typedef enum {
+ CONNECTION_ITERATOR_TYPE_REGISTERED = 0, /**< The iterator of the registered profile */
+ CONNECTION_ITERATOR_TYPE_CONNECTED = 1, /**< The iterator of the connected profile */
+ CONNECTION_ITERATOR_TYPE_DEFAULT = 2, /**< The iterator of the default profile */
} connection_iterator_type_e;
+
/**
* @brief Enumeration for reset profile type.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_RESET_DEFAULT_PROFILE = 0, /**< Initialized with the default profile defined by csc */
- CONNECTION_RESET_CLEAR_PROFILE = 1, /**< Remove all profiles */
+typedef enum {
+ /**
+ * Initialized with the default profile defined by csc
+ */
+ CONNECTION_RESET_DEFAULT_PROFILE = 0,
+
+ /**
+ * Remove all profiles
+ */
+ CONNECTION_RESET_CLEAR_PROFILE = 1,
+
} connection_reset_option_e;
+
/**
- * @brief This enumeration defines the attached or detached state of ethernet cable.
- * @since_tizen 2.4
+ * @brief Enumeration for the attached or detached state of ethernet cable.
+ * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
*/
-typedef enum
-{
- CONNECTION_ETHERNET_CABLE_DETACHED = 0, /**< Ethernet cable is detached */
- CONNECTION_ETHERNET_CABLE_ATTACHED = 1, /**< Ethernet cable is attached */
+typedef enum {
+ CONNECTION_ETHERNET_CABLE_DETACHED = 0, /**< Ethernet cable is detached */
+ CONNECTION_ETHERNET_CABLE_ATTACHED = 1, /**< Ethernet cable is attached */
} connection_ethernet_cable_state_e;
+
/**
* @brief Enumeration for connection errors.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_ERROR_NONE = TIZEN_ERROR_NONE, /**< Successful */
- CONNECTION_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER, /**< Invalid parameter */
- CONNECTION_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY, /**< Out of memory error */
- CONNECTION_ERROR_INVALID_OPERATION = TIZEN_ERROR_INVALID_OPERATION, /**< Invalid Operation */
- CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED = TIZEN_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED, /**< Address family not supported */
- CONNECTION_ERROR_OPERATION_FAILED = TIZEN_ERROR_CONNECTION|0x0401, /**< Operation failed */
- CONNECTION_ERROR_ITERATOR_END = TIZEN_ERROR_CONNECTION|0x0402, /**< End of iteration */
- CONNECTION_ERROR_NO_CONNECTION = TIZEN_ERROR_CONNECTION|0x0403, /**< There is no connection */
- CONNECTION_ERROR_NOW_IN_PROGRESS = TIZEN_ERROR_NOW_IN_PROGRESS, /** Now in progress */
- CONNECTION_ERROR_ALREADY_EXISTS = TIZEN_ERROR_CONNECTION|0x0404, /**< Already exists */
- CONNECTION_ERROR_OPERATION_ABORTED = TIZEN_ERROR_CONNECTION|0x0405, /**< Operation is aborted */
- CONNECTION_ERROR_DHCP_FAILED = TIZEN_ERROR_CONNECTION|0x0406, /**< DHCP failed */
- CONNECTION_ERROR_INVALID_KEY = TIZEN_ERROR_CONNECTION|0x0407, /**< Invalid key */
- CONNECTION_ERROR_NO_REPLY = TIZEN_ERROR_CONNECTION|0x0408, /**< No reply */
- CONNECTION_ERROR_PERMISSION_DENIED = TIZEN_ERROR_PERMISSION_DENIED, /**< Permission denied */
- CONNECTION_ERROR_NOT_SUPPORTED = TIZEN_ERROR_NOT_SUPPORTED /**< Not Supported */
+typedef enum {
+ /**
+ * Successful
+ */
+ CONNECTION_ERROR_NONE = TIZEN_ERROR_NONE,
+
+ /**
+ * Invalid parameter
+ */
+ CONNECTION_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER,
+
+ /**
+ * Out of memory error
+ */
+ CONNECTION_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY,
+
+ /**
+ * Invalid operation
+ */
+ CONNECTION_ERROR_INVALID_OPERATION = TIZEN_ERROR_INVALID_OPERATION,
+
+ /**
+ * Address family not supported
+ */
+ CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED = TIZEN_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED,
+
+ /**
+ * Operation failed
+ */
+ CONNECTION_ERROR_OPERATION_FAILED = TIZEN_ERROR_CONNECTION|0x0401,
+
+ /**
+ * End of iteration
+ */
+ CONNECTION_ERROR_ITERATOR_END = TIZEN_ERROR_CONNECTION|0x0402,
+
+ /**
+ * There is no connection
+ */
+ CONNECTION_ERROR_NO_CONNECTION = TIZEN_ERROR_CONNECTION|0x0403,
+
+ /**
+ * Now inprogress
+ */
+ CONNECTION_ERROR_NOW_IN_PROGRESS = TIZEN_ERROR_NOW_IN_PROGRESS,
+
+ /**
+ * Already exists
+ */
+ CONNECTION_ERROR_ALREADY_EXISTS = TIZEN_ERROR_CONNECTION|0x0404,
+
+ /**
+ * Operation is aborted
+ */
+ CONNECTION_ERROR_OPERATION_ABORTED = TIZEN_ERROR_CONNECTION|0x0405,
+
+ /**
+ * DHCP failed
+ */
+ CONNECTION_ERROR_DHCP_FAILED = TIZEN_ERROR_CONNECTION|0x0406,
+
+ /**
+ * Invalid key
+ */
+ CONNECTION_ERROR_INVALID_KEY = TIZEN_ERROR_CONNECTION|0x0407,
+
+ /**
+ * No reply
+ */
+ CONNECTION_ERROR_NO_REPLY = TIZEN_ERROR_CONNECTION|0x0408,
+
+ /**
+ * Permission denied
+ */
+ CONNECTION_ERROR_PERMISSION_DENIED = TIZEN_ERROR_PERMISSION_DENIED,
+
+ /**
+ * Not supported
+ */
+ CONNECTION_ERROR_NOT_SUPPORTED = TIZEN_ERROR_NOT_SUPPORTED
+
} connection_error_e;
/**
* @}
*/
+
/**
* @addtogroup CAPI_NETWORK_CONNECTION_STATISTICS_MODULE
* @{
*/
+
/**
* @brief Enumeration for statistics type.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_STATISTICS_TYPE_LAST_RECEIVED_DATA = 0, /**< Last received data */
- CONNECTION_STATISTICS_TYPE_LAST_SENT_DATA = 1, /**< Last sent data */
- CONNECTION_STATISTICS_TYPE_TOTAL_RECEIVED_DATA = 2, /**< Total received data */
- CONNECTION_STATISTICS_TYPE_TOTAL_SENT_DATA = 3, /**< Total sent data */
+typedef enum {
+ CONNECTION_STATISTICS_TYPE_LAST_RECEIVED_DATA = 0, /**< Last received data */
+ CONNECTION_STATISTICS_TYPE_LAST_SENT_DATA = 1, /**< Last sent data */
+ CONNECTION_STATISTICS_TYPE_TOTAL_RECEIVED_DATA = 2, /**< Total received data */
+ CONNECTION_STATISTICS_TYPE_TOTAL_SENT_DATA = 3, /**< Total sent data */
} connection_statistics_type_e;
+
/**
* @}
*/
+
/**
* @addtogroup CAPI_NETWORK_CONNECTION_MANAGER_MODULE
* @{
* @privlevel public
* @privilege %http://tizen.org/privilege/network.get
* @remarks You must release @a handle using connection_destroy().
- * @param[out] connection The connection handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @param[out] connection The connection handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
* @see connection_destroy()
*/
int connection_create(connection_h* connection);
+
/**
* @brief Destroys the connection handle.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] connection The connection handle
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @param[in] connection The connection handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
* @see connection_create()
*/
int connection_destroy(connection_h connection);
+
/**
* @brief Called when the type of a connection is changed.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] type The type of the current network connection
- * @param[in] user_data The user data passed from the callback registration function
+ * @param[in] type The type of the current network connection
+ * @param[in] user_data The user data passed from the callback registration function
* @see connection_set_type_changed_cb()
* @see connection_unset_type_changed_cb()
*/
typedef void(*connection_type_changed_cb)(connection_type_e type, void* user_data);
+
/**
* @brief Called when the address is changed.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] ipv4_address The IP address for IPv4
- * @param[in] ipv6_address The IP address for IPv6
- * @param[in] user_data The user data passed from the callback registration function
+ * @param[in] ipv4_address The IP address for IPv4
+ * @param[in] ipv6_address The IP address for IPv6
+ * @param[in] user_data The user data passed from the callback registration function
* @see connection_set_ip_address_changed_cb()
* @see connection_unset_ip_address_changed_cb()
* @see connection_set_proxy_address_changed_cb()
* @see connection_unset_proxy_address_changed_cb()
*/
-typedef void(*connection_address_changed_cb)(const char* ipv4_address, const char* ipv6_address, void* user_data);
+typedef void(*connection_address_changed_cb)(const char* ipv4_address,
+ const char* ipv6_address, void* user_data);
+
/**
* @brief Called when connection_set_default_cellular_service_profile_async() finishes.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] result The result
- * @param[in] user_data The user data passed from connection_open_profile()
+ * @param[in] result The result
+ * @param[in] user_data The user data passed from connection_open_profile()
* @pre connection_set_default_cellular_service_profile_async() will invoke this callback function.
* @see connection_set_default_cellular_service_profile_async()
*/
typedef void(*connection_set_default_cb)(connection_error_e result, void* user_data);
+/* @brief Called with an IPv6 address.
+ * @since_tizen 4.0
+ * @remarks If @a ipv6_address is needed outside the callback, a copy should be made. \n
+ * @a ipv6_address will be freed automatically after the execution of this callback.
+ * @param[in] ipv6_address The IPv6 address
+ * @param[in] user_data The user data passed from the foreach function
+ * @return @c true to continue with the next iteration of the loop, \n
+ * @c false to break out of the loop
+ * @pre connection_foreach_ipv6_addresses() will invoke this callback.
+ * @see connection_foreach_ipv6_addresses()
+ */
+typedef bool(*connection_ipv6_address_cb)(char *ipv6_address, void *user_data);
+
/**
* @brief Gets the type of the current profile for data connection.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] connection The connection handle
- * @param[out] type The type of the network
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @param[in] connection The connection handle
+ * @param[out] type The type of the network
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
int connection_get_type(connection_h connection, connection_type_e* type);
+
/**
* @brief Gets the IP address of the current connection.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a ip_address using free().
- * @param[in] connection The connection handle
- * @param[in] address_family The address family
- * @param[out] ip_address The pointer to the IP address string
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @param[in] connection The connection handle
+ * @param[in] address_family The address family
+ * @param[out] ip_address The pointer to the IP address string
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
*/
-int connection_get_ip_address(connection_h connection, connection_address_family_e address_family, char** ip_address);
+int connection_get_ip_address(connection_h connection,
+ connection_address_family_e address_family, char** ip_address);
+
/**
* @brief Gets the proxy address of the current connection.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a proxy using free().
- * @param[in] connection The connection handle
- * @param[in] address_family The address family
- * @param[out] proxy The proxy address
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @param[in] connection The connection handle
+ * @param[in] address_family The address family
+ * @param[out] proxy The proxy address
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
*/
-int connection_get_proxy(connection_h connection, connection_address_family_e address_family, char** proxy);
+int connection_get_proxy(connection_h connection,
+ connection_address_family_e address_family, char** proxy);
+
/**
* @brief Gets the MAC address of the Wi-Fi or ethernet.
- * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0
+ * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
* @remarks @a mac_addr must be released with free() by you.
- * @param[in] connection The handle of the connection
- * @param[in] type The type of current network connection
- * @param[out] mac_addr The MAC address
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_INVALID_OPERATION Invalid operation
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @param[in] connection The handle of the connection
+ * @param[in] type The type of current network connection
+ * @param[out] mac_addr The MAC address
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_INVALID_OPERATION Invalid operation
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
*/
-int connection_get_mac_address(connection_h connection, connection_type_e type, char** mac_addr);
+int connection_get_mac_address(connection_h connection,
+ connection_type_e type, char** mac_addr);
+
/**
* @brief Gets the state of cellular connection.
* @details The returned state is for the cellular connection state.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] connection The connection handle
- * @param[out] state The state of the cellular connection
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @param[in] connection The connection handle
+ * @param[out] state The state of the cellular connection
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
int connection_get_cellular_state(connection_h connection, connection_cellular_state_e* state);
+
/**
* @brief Gets the state of the Wi-Fi.
* @details The returned state is for the Wi-Fi connection state.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.get
- * @param[in] connection The connection handle
- * @param[out] state The state of Wi-Fi connection
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @param[in] connection The connection handle
+ * @param[out] state The state of Wi-Fi connection
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
int connection_get_wifi_state(connection_h connection, connection_wifi_state_e* state);
+
/**
* @brief Gets the state of the Ethernet.
* @details The returned state is for the Ethernet connection state.
- * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0
+ * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.get
- * @param[in] connection The connection handle
- * @param[out] state The state of Ethernet connection
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @param[in] connection The connection handle
+ * @param[out] state The state of Ethernet connection
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
int connection_get_ethernet_state(connection_h connection, connection_ethernet_state_e* state);
+
/**
-* @brief Checks for ethernet cable is attached or not.
-* @details The returned state is for the ethernet cable state.
-* @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0
-* @privlevel public
-* @privilege %http://tizen.org/privilege/network.get
-* @param[in] connection The handle of the connection
-* @param[in] state - Enum connection_ethernet_cable_state_e
-* @return 0 on success, otherwise negative error value
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-* @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-* @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
-*/
-int connection_get_ethernet_cable_state(connection_h connection, connection_ethernet_cable_state_e *state);
+ * @brief Checks for ethernet cable is attached or not.
+ * @details The returned state is for the ethernet cable state.
+ * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
+ * @privlevel public
+ * @privilege %http://tizen.org/privilege/network.get
+ * @param[in] connection The handle of the connection
+ * @param[in] state The state of ethernet cable
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ */
+int connection_get_ethernet_cable_state(connection_h connection,
+ connection_ethernet_cable_state_e *state);
+
/**
+ * @deprecated Deprecated since 4.0. Use connection_ethernet_cable_state_changed_cb instead.
* @brief Called when ethernet cable is plugged [in/out].
- * @since_tizen 2.4
- * @param[in] state The ethernet cable state (connection_ethernet_cable_state_e)
- * @param[in] user_data The user data passed to callback registration function
+ * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
+ * @param[in] state The state of ethernet cable
+ * @param[in] user_data The user data passed to callback registration function
*/
-typedef void(*connection_ethernet_cable_state_chaged_cb)(
- connection_ethernet_cable_state_e state, void* user_data);
+typedef void(*connection_ethernet_cable_state_chaged_cb)
+ (connection_ethernet_cable_state_e state, void* user_data);
+
/**
+ * @deprecated Deprecated since 4.0. Use connection_set_ethernet_cable_state_changed_cb() instead.
* @brief Registers callback for ethernet cable is plugged [in/out] event.
- * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0
- * @param[in] callback The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
+ * @param[in] connection The handle of connection
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ */
+int connection_set_ethernet_cable_state_chaged_cb(connection_h connection,
+ connection_ethernet_cable_state_chaged_cb callback, void *user_data) TIZEN_DEPRECATED_API;
+
+
+/**
+ * @deprecated Deprecated since 4.0. Use connection_unset_ethernet_cable_state_changed_cb() instead.
+ * @brief Unregisters callback for ethernet cable is plugged [in/out] event.
+ * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
+ * @param[in] connection The handle of connection
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ */
+int connection_unset_ethernet_cable_state_chaged_cb(connection_h connection) TIZEN_DEPRECATED_API;
+
+/**
+ * @brief Called when ethernet cable is plugged [in/out].
+ * @since_tizen 4.0
+ * @param[in] state The state of ethernet cable
+ * @param[in] user_data The user data passed to callback registration function
+ */
+typedef void(*connection_ethernet_cable_state_changed_cb)(
+ connection_ethernet_cable_state_e state, void* user_data);
+
+
+/**
+ * @brief Registers callback for ethernet cable is plugged [in/out] event.
+ * @since_tizen 4.0
+ * @param[in] connection The handle of connection
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_set_ethernet_cable_state_chaged_cb( connection_h connection,
- connection_ethernet_cable_state_chaged_cb callback, void *user_data);
+int connection_set_ethernet_cable_state_changed_cb(connection_h connection,
+ connection_ethernet_cable_state_changed_cb callback, void *user_data);
+
/**
* @brief Unregisters callback for ethernet cable is plugged [in/out] event.
- * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0
- * @param[in] connection The handle of connection
- * @return 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @since_tizen 4.0
+ * @param[in] connection The handle of connection
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_unset_ethernet_cable_state_chaged_cb(connection_h connection);
+int connection_unset_ethernet_cable_state_changed_cb(connection_h connection);
+
/**
* @brief Gets the state of the Bluetooth.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.get
- * @param[in] connection The connection handle
- * @param[out] state The state of the Bluetooth connection
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @param[in] connection The connection handle
+ * @param[out] state The state of the Bluetooth connection
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
int connection_get_bt_state(connection_h connection, connection_bt_state_e* state);
+
/**
* @brief Registers the callback that is called when the type of the current connection is changed.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] connection The connection handle
- * @param[in] callback The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @param[in] connection The connection handle
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_set_type_changed_cb(connection_h connection, connection_type_changed_cb callback, void* user_data);
+int connection_set_type_changed_cb(connection_h connection,
+ connection_type_changed_cb callback, void* user_data);
+
/**
* @brief Unregisters the callback that is called when the type of current connection is changed.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] connection The connection handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @param[in] connection The connection handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
int connection_unset_type_changed_cb(connection_h connection);
+
/**
* @brief Registers the callback that is called when the IP address is changed.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] connection The connection handle
- * @param[in] callback The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @param[in] connection The connection handle
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_set_ip_address_changed_cb(connection_h connection, connection_address_changed_cb callback, void* user_data);
+int connection_set_ip_address_changed_cb(connection_h connection,
+ connection_address_changed_cb callback, void* user_data);
+
/**
* @brief Unregisters the callback that is called when the IP address is changed.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] connection The connection handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @param[in] connection The connection handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
int connection_unset_ip_address_changed_cb(connection_h connection);
+
/**
* @brief Registers the callback that is called when the proxy address is changed.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] connection The connection handle
- * @param[in] callback The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @param[in] connection The connection handle
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_set_proxy_address_changed_cb(connection_h connection, connection_address_changed_cb callback, void* user_data);
+int connection_set_proxy_address_changed_cb(connection_h connection,
+ connection_address_changed_cb callback, void* user_data);
+
/**
* @brief Unregisters the callback that is called when the proxy address is changed.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] connection The connection handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @param[in] connection The connection handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
int connection_unset_proxy_address_changed_cb(connection_h connection);
+
/**
* @brief Adds a new profile which is created by connection_profile_create().
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.profile
* @remarks You can only add a profile of the cellular type.
- * @param[in] connection The connection handle
- * @param[in] profile The profile handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @param[in] connection The connection handle
+ * @param[in] profile The profile handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
int connection_add_profile(connection_h connection, connection_profile_h profile);
+
/**
* @brief Removes an existing profile.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.profile \n
- * %http://tizen.org/privilege/network.get
+ * %http://tizen.org/privilege/network.get
* @remarks This API needs both privileges.
- * @param[in] connection The connection handle
- * @param[in] profile The profile handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @param[in] connection The connection handle
+ * @param[in] profile The profile handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
int connection_remove_profile(connection_h connection, connection_profile_h profile);
+
/**
* @brief Updates an existing profile.
- * @details When a profile is changed, these changes will be not applied to the Connection Manager immediately.
- * When you call this function, your changes affect the Connection Manager and the existing profile is updated.
- * In addition, the existing profile will be updated if you call connection_open_profile().
+ * @details When a profile is changed, these changes will be not applied to the
+ * Connection Manager immediately.
+ * When you call this function, your changes affect the Connection Manager
+ * and the existing profile is updated.
+ * In addition, the existing profile will be updated if you call connection_open_profile().
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.profile \n
- * %http://tizen.org/privilege/network.get
+ * %http://tizen.org/privilege/network.get
* @remarks This API needs both privileges.
- * @param[in] connection The connection handle
- * @param[in] profile The profile handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @param[in] connection The connection handle
+ * @param[in] profile The profile handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
* @see connection_open_profile()
*/
int connection_update_profile(connection_h connection, connection_profile_h profile);
+
/**
* @brief Gets a profiles iterator.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.get
* @remarks You must release @a profile_iterator using connection_destroy().
- * @param[in] connection The connection handle
- * @param[in] type The type of the connetion iterator
- * @param[out] profile_iterator The iterator of profile
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+ * @param[in] connection The connection handle
+ * @param[in] type The type of the connection iterator
+ * @param[out] profile_iterator The iterator of profile
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
*/
-int connection_get_profile_iterator(connection_h connection, connection_iterator_type_e type, connection_profile_iterator_h* profile_iterator);
+int connection_get_profile_iterator(connection_h connection,
+ connection_iterator_type_e type, connection_profile_iterator_h* profile_iterator);
+
/**
* @brief Moves the profile iterator to the next position and gets a profile handle.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @param[in] profile_iterator The iterator of profile
- * @param[out] profile The profile handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ITERATOR_END End of iteration
+ * @param[out] profile The profile handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ITERATOR_END End of iteration
*/
-int connection_profile_iterator_next(connection_profile_iterator_h profile_iterator, connection_profile_h* profile);
+int connection_profile_iterator_next(connection_profile_iterator_h profile_iterator,
+ connection_profile_h* profile);
+
/**
* @brief Checks whether the next element of a profile iterator exists or not.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks The specific error code can be obtained using the get_last_result() method. Error codes are described in Exception section.
+ * @remarks The specific error code can be obtained using the get_last_result() method.
+ * Error codes are described in Exception section.
* @param[in] profile_iterator The iterator of profile
- * @return @c true if next element exists, otherwise @c false if next element doesn't exist
+ * @return @c true if next element exists,
+ * otherwise @c false if next element doesn't exist
*/
bool connection_profile_iterator_has_next(connection_profile_iterator_h profile_iterator);
+
/**
* @brief Destroys a profiles iterator.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @param[in] profile_iterator The iterator of the profile
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
*/
int connection_destroy_profile_iterator(connection_profile_iterator_h profile_iterator);
+
/**
* @brief Gets the name of the default profile.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.get
* @remarks You must release @a profile using connection_profile_destroy().
- * @param[in] connection The connection handle
- * @param[out] profile The profile handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NO_CONNECTION There is no connection
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+ * @param[in] connection The connection handle
+ * @param[out] profile The profile handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NO_CONNECTION There is no connection
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
*/
int connection_get_current_profile(connection_h connection, connection_profile_h* profile);
+
/**
* @brief Gets the default profile which provides the given cellular service.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.get
* @remarks You must release @a profile using connection_profile_destroy().
- * @param[in] connection The connection handle
- * @param[in] type The type of cellular service \n
- * #CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION is not permitted.
- * @param[out] profile The profile handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denieda
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @param[in] connection The connection handle
+ * @param[in] type The type of cellular service \n
+ * #CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION is not permitted
+ * @param[out] profile The profile handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_get_default_cellular_service_profile(connection_h connection, connection_cellular_service_type_e type, connection_profile_h* profile);
+int connection_get_default_cellular_service_profile(connection_h connection,
+ connection_cellular_service_type_e type, connection_profile_h* profile);
+
/**
* @brief Sets the default profile which provides the given cellular service.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.profile \n
- * %http://tizen.org/privilege/network.get
+ * %http://tizen.org/privilege/network.get
* @remarks This API needs both privileges.
- * @param[in] connection The connection handle
- * @param[in] type The type of cellular service \n
- * only #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are permitted.
- * @param[in] profile The profile handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @param[in] connection The connection handle
+ * @param[in] type The type of cellular service \n
+ * Only #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and
+ * #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are permitted
+ * @param[in] profile The profile handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_set_default_cellular_service_profile(connection_h connection, connection_cellular_service_type_e type, connection_profile_h profile);
+int connection_set_default_cellular_service_profile(connection_h connection,
+ connection_cellular_service_type_e type, connection_profile_h profile);
+
/**
* @brief Sets the default profile which provides the given cellular service, asynchronously.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.profile \n
- * %http://tizen.org/privilege/network.get
+ * %http://tizen.org/privilege/network.get
* @remarks This API needs both privileges.
- * @param[in] connection The connection handle
- * @param[in] type The type of cellular service (only #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are permitted)
- * @param[in] profile The profile handle
- * @param[in] callback The callback function to be called
+ * @param[in] connection The connection handle
+ * @param[in] type The type of cellular service \n
+ * Only #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and
+ * #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are permitted
+ * @param[in] profile The profile handle
+ * @param[in] callback The callback function to be called
* @param[in] user_data The user data passed to the callback function
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
int connection_set_default_cellular_service_profile_async(connection_h connection,
- connection_cellular_service_type_e type, connection_profile_h profile, connection_set_default_cb callback, void* user_data);
+ connection_cellular_service_type_e type, connection_profile_h profile,
+ connection_set_default_cb callback, void* user_data);
+
/**
* @brief Called after connection_open_profile() is finished.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] result The result
- * @param[in] user_data The user data passed from connection_open_profile()
+ * @param[in] result The result
+ * @param[in] user_data The user data passed from connection_open_profile()
* @pre connection_open_profile() will invoke this callback function.
* @see connection_open_profile()
*/
typedef void(*connection_opened_cb)(connection_error_e result, void* user_data);
+
/**
* @brief Called after connection_close_profile() is finished.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] result The result
- * @param[in] user_data The user data passed from connection_close_profile()
+ * @param[in] result The result
+ * @param[in] user_data The user data passed from connection_close_profile()
* @pre connection_close_profile() will invoke this callback function.
* @see connection_close_profile()
*/
typedef void(*connection_closed_cb)(connection_error_e result, void* user_data);
+
/**
* @brief Called after connection_reset_profile() is finished.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] result The result
- * @param[in] user_data The user data passed from connection_reset_profile()
+ * @param[in] result The result
+ * @param[in] user_data The user data passed from connection_reset_profile()
* @pre connection_reset_profile() will invoke this callback function.
* @see connection_reset_profile()
*/
typedef void(*connection_reset_cb)(connection_error_e result, void* user_data);
+
/**
* @brief Opens a connection of profile, asynchronously.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.set \n
- * %http://tizen.org/privilege/network.get
+ * %http://tizen.org/privilege/network.get
* @remarks This API needs both privileges.
- * @param[in] connection The connection handle
- * @param[in] profile The profile handle
- * @param[in] callback The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+ * @param[in] connection The connection handle
+ * @param[in] profile The profile handle
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
* @post connection_opened_cb() will be invoked.
* @see connection_opened_cb()
* @see connection_close_profile()
* @see connection_profile_unset_state_changed_cb()
* @see connection_profile_state_changed_cb()
*/
-int connection_open_profile(connection_h connection, connection_profile_h profile, connection_opened_cb callback, void* user_data);
+int connection_open_profile(connection_h connection, connection_profile_h profile,
+ connection_opened_cb callback, void* user_data);
+
/**
* @brief Closes a connection of profile.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.set
- * @param[in] connection The connection handle
- * @param[in] profile The profile handle
- * @param[in] callback The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+ * @param[in] connection The connection handle
+ * @param[in] profile The profile handle
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
* @post connection_closed_cb() will be invoked.
* @see connection_closed_cb()
* @see connection_open_profile()
* @see connection_profile_unset_state_changed_cb()
* @see connection_profile_state_changed_cb()
*/
-int connection_close_profile(connection_h connection, connection_profile_h profile, connection_closed_cb callback, void* user_data);
+int connection_close_profile(connection_h connection, connection_profile_h profile,
+ connection_closed_cb callback, void* user_data);
+
/**
* @brief Resets the cellular profile.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.profile \n
- * %http://tizen.org/privilege/network.get
+ * %http://tizen.org/privilege/network.get
* @remarks This API needs both privileges.
- * @param[in] connection The connection handle
- * @param[in] type The type of reset
- * @param[in] id The subscriber identity module id to reset (The sim index starts from 0.)
- * @param[in] callback The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @param[in] connection The connection handle
+ * @param[in] type The type of reset
+ * @param[in] id The subscriber identity module ID to reset
+ * (The sim index starts from 0.)
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
* @post connection_reset_cb() will be invoked.
*/
-int connection_reset_profile(connection_h connection, connection_reset_option_e type, int id, connection_reset_cb callback, void *user_data);
+int connection_reset_profile(connection_h connection, connection_reset_option_e type,
+ int id, connection_reset_cb callback, void *user_data);
+
/**
* @brief Adds a IPv4 route to the routing table.
- * @details You can get the @a interface_name from connection_profile_get_network_interface_name() of opened profile.
+ * @details You can get the @a interface_name from
+ * connection_profile_get_network_interface_name() of opened profile.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.set
- * @param[in] connection The connection handle
- * @param[in] interface_name The name of network interface
- * @param[in] host_address The IP address of the host
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ALREADY_EXISTS Already exists
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+ * @param[in] connection The connection handle
+ * @param[in] interface_name The name of network interface
+ * @param[in] host_address The IP address of the host
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ALREADY_EXISTS Already exists
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
* @see connection_profile_get_network_interface_name()
*/
-int connection_add_route(connection_h connection, const char* interface_name, const char* host_address);
+int connection_add_route(connection_h connection, const char* interface_name,
+ const char* host_address) TIZEN_DEPRECATED_API;
+
/**
+ * @deprecated Deprecated since 4.0. Use connection_remove_route_entry() instead.
* @brief Removes a IPv4 route from the routing table.
- * @details You can get the @a interface_name from connection_profile_get_network_interface_name() of opened profile.
+ * @details You can get the @a interface_name from
+ * connection_profile_get_network_interface_name() of opened profile.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.set
- * @param[in] connection The connection handle
- * @param[in] interface_name The name of network interface
- * @param[in] host_address The IP address of the host
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+ * @param[in] connection The connection handle
+ * @param[in] interface_name The name of network interface
+ * @param[in] host_address The IP address of the host
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
* @see connection_profile_get_network_interface_name()
*/
int connection_remove_route(connection_h connection, const char* interface_name, const char* host_address);
+
/**
+ * @deprecated Deprecated since 4.0. Use connection_add_route_entry() instead.
* @brief Adds a IPv6 route to the routing table.
- * @details You can get the @a interface_name from connection_profile_get_network_interface_name() of opened profile.
+ * @details You can get the @a interface_name from
+ * connection_profile_get_network_interface_name() of opened profile.
* @since_tizen 2.3.1
* @privlevel public
* @privilege %http://tizen.org/privilege/network.set
- * @param[in] connection The connection handle
- * @param[in] interface_name The name of network interface
- * @param[in] host_address The IP address of the host
- * @param[in] gateway The gateway address
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ALREADY_EXISTS Already exists
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+ * @param[in] connection The connection handle
+ * @param[in] interface_name The name of network interface
+ * @param[in] host_address The IP address of the host
+ * @param[in] gateway The gateway address
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ALREADY_EXISTS Already exists
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
* @see connection_profile_get_network_interface_name()
*/
-int connection_add_route_ipv6(connection_h connection, const char *interface_name, const char *host_address, const char * gateway);
+int connection_add_route_ipv6(connection_h connection, const char *interface_name,
+ const char *host_address, const char * gateway) TIZEN_DEPRECATED_API;
+
/**
+ * @deprecated Deprecated since 4.0. Use connection_remove_route_entry() instead.
* @brief Removes a IPV6 route from the routing table.
- * @details You can get the @a interface_name from connection_profile_get_network_interface_name() of opened profile.
+ * @details You can get the @a interface_name from
+ * connection_profile_get_network_interface_name() of opened profile.
* @since_tizen 2.3.1
* @privlevel public
* @privilege %http://tizen.org/privilege/network.set
- * @param[in] connection The connection handle
- * @param[in] interface_name The name of network interface
- * @param[in] host_address The IP address of the host
- * @param[in] gateway The gateway address
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+ * @param[in] connection The connection handle
+ * @param[in] interface_name The name of network interface
+ * @param[in] host_address The IP address of the host
+ * @param[in] gateway The gateway address
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @see connection_profile_get_network_interface_name()
+ */
+int connection_remove_route_ipv6(connection_h connection, const char *interface_name,
+ const char *host_address, const char * gateway) TIZEN_DEPRECATED_API;
+
+/**
+ * @brief Adds a route to the routing table.
+ * @details You can get the @a interface_name from \n
+ * connection_profile_get_network_interface_name() of opened profile.
+ * @since_tizen 4.0
+ * @privlevel public
+ * @privilege %http://tizen.org/privilege/network.set
+ * @param[in] connection The connection handle
+ * @param[in] address_family The address family
+ * @param[in] interface_name The name of network interface
+ * @param[in] host_address The IP address of the host (e.g., single IP address such as
+ * 163.152.10.2,192.168.1.2), group's IP address (e.g., 163.152.10.0, 192.168.0.0)
+ * is not allowed
+ * @param[in] gateway The gateway address
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ALREADY_EXISTS Already exists
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @see connection_profile_get_network_interface_name()
+ */
+int connection_add_route_entry(connection_h connection,
+ connection_address_family_e address_family, const char *interface_name,
+ const char *host_address, const char *gateway);
+
+/**
+ * @brief Removes a route from the routing table.
+ * @details You can get the @a interface_name from \n
+ * connection_profile_get_network_interface_name() of opened profile.
+ * @since_tizen 4.0
+ * @privlevel public
+ * @privilege %http://tizen.org/privilege/network.set
+ * @param[in] connection The connection handle
+ * @param[in] address_family The address family
+ * @param[in] interface_name The name of network interface
+ * @param[in] host_address The IP address of the host (e.g., single IP address such as
+ * 163.152.10.2,192.168.1.2), group's IP address (e.g., 163.152.10.0, 192.168.0.0)
+ * is not allowed
+ * @param[in] gateway The gateway address
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
* @see connection_profile_get_network_interface_name()
*/
-int connection_remove_route_ipv6(connection_h connection, const char *interface_name, const char *host_address, const char * gateway);
+int connection_remove_route_entry(connection_h connection,
+ connection_address_family_e address_family, const char *interface_name,
+ const char *host_address, const char *gateway);
+
+/*
+ * @brief Gets all IPv6 addresses assigned to the network interface.
+ * @since_tizen 4.0
+ * @param[in] connection The connection handle
+ * @param[in] connection_type The connection type
+ * @param[in] callback The callback to be called for each IPv6 address
+ * @param[in] user_data The user data passed to the callback function
+ * @return 0 on success, otherwise negative error value.
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ */
+int connection_foreach_ipv6_address(connection_h connection, connection_type_e connection_type,
+ connection_ipv6_address_cb callback, void *user_data);
/**
* @}
*/
+
/**
* @addtogroup CAPI_NETWORK_CONNECTION_STATISTICS_MODULE
* @{
*/
+
/**
* @brief Gets the statistics information.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.get
- * @param[in] connection The connection handle
- * @param[in] connection_type The type of connection (only CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are supported)
- * @param[in] statistics_type The type of statistics
- * @param[out] size The received data size of the last cellular packet data connection (bytes)
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @param[in] connection The connection handle
+ * @param[in] connection_type The type of connection \n
+ * Only CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are supported
+ * @param[in] statistics_type The type of statistics
+ * @param[out] size The received data size of the last cellular packet data connection (bytes)
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_get_statistics(connection_h connection, connection_type_e connection_type, connection_statistics_type_e statistics_type, long long* size);
+int connection_get_statistics(connection_h connection, connection_type_e connection_type,
+ connection_statistics_type_e statistics_type, long long* size);
+
/**
* @brief Resets the statistics information.
* @privlevel public
* @privilege %http://tizen.org/privilege/network.set
* @remarks This API needs both privileges.
- * @param[in] connection The connection handle
- * @param[in] connection_type The type of connection (only CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are supported)
- * @param[in] statistics_type The type of statistics
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @param[in] connection The connection handle
+ * @param[in] connection_type The type of connection \n
+ * Only CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are supported
+ * @param[in] statistics_type The type of statistics
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_reset_statistics(connection_h connection, connection_type_e connection_type, connection_statistics_type_e statistics_type);
-
+int connection_reset_statistics(connection_h connection, connection_type_e connection_type,
+ connection_statistics_type_e statistics_type);
/**
* @}
*/
+
#ifdef __cplusplus
}
#endif /* __cplusplus */
+
#endif