/* SICRL bits - MPC837x specific */
#define SICRL_USB_A 0xC0000000
#define SICRL_USB_B 0x30000000
+#define SICRL_USB_B_SD 0x20000000
#define SICRL_UART 0x0C000000
#define SICRL_GPIO_A 0x02000000
#define SICRL_GPIO_B 0x01000000
#define SICRH_GPIO2_C 0x00002000
#define SICRH_GPIO2_D 0x00001000
#define SICRH_GPIO2_E 0x00000C00
+#define SICRH_GPIO2_E_SD 0x00000800
#define SICRH_GPIO2_F 0x00000300
#define SICRH_GPIO2_G 0x000000C0
#define SICRH_GPIO2_H 0x00000030
#define SICRH_SPI 0x00000003
+#define SICRH_SPI_SD 0x00000001
#endif
/* SWCRR - System Watchdog Control Register
#define SCCR_USBDRCM_2 0x00800000
#define SCCR_USBDRCM_3 0x00c00000
-#define SCCR_PCIEXP1CM 0x00300000
-#define SCCR_PCIEXP2CM 0x000c0000
-
#define SCCR_SATA1CM 0x00003000
#define SCCR_SATA1CM_SHIFT 12
#define SCCR_SATACM 0x00003c00
#define SCCR_USBDRCM_2 0x00800000
#define SCCR_USBDRCM_3 0x00c00000
+/* All of the four SATA controllers must have the same clock ratio */
+#define SCCR_SATA1CM 0x000000c0
+#define SCCR_SATA1CM_SHIFT 6
+#define SCCR_SATACM 0x000000ff
+#define SCCR_SATACM_SHIFT 0
+#define SCCR_SATACM_0 0x00000000
+#define SCCR_SATACM_1 0x00000055
+#define SCCR_SATACM_2 0x000000aa
+#define SCCR_SATACM_3 0x000000ff
+#endif
+
#define SCCR_PCIEXP1CM 0x00300000
#define SCCR_PCIEXP1CM_SHIFT 20
#define SCCR_PCIEXP1CM_0 0x00000000
#define SCCR_PCIEXP2CM_2 0x00080000
#define SCCR_PCIEXP2CM_3 0x000c0000
-/* All of the four SATA controllers must have the same clock ratio */
-#define SCCR_SATA1CM 0x000000c0
-#define SCCR_SATA1CM_SHIFT 6
-#define SCCR_SATACM 0x000000ff
-#define SCCR_SATACM_SHIFT 0
-#define SCCR_SATACM_0 0x00000000
-#define SCCR_SATACM_1 0x00000055
-#define SCCR_SATACM_2 0x000000aa
-#define SCCR_SATACM_3 0x000000ff
-#endif
-
/* CSn_BDNS - Chip Select memory Bounds Register
*/
#define CSBNDS_SA 0x00FF0000
#define TIMING_CFG1_CASLAT_30 0x00050000 /* CAS latency = 3.0 */
#define TIMING_CFG1_CASLAT_35 0x00060000 /* CAS latency = 3.5 */
#define TIMING_CFG1_CASLAT_40 0x00070000 /* CAS latency = 4.0 */
+#define TIMING_CFG1_CASLAT_45 0x00080000 /* CAS latency = 4.5 */
+#define TIMING_CFG1_CASLAT_50 0x00090000 /* CAS latency = 5.0 */
/* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2
*/
#define DDRCDR_M_ODR 0x00000002
#define DDRCDR_Q_DRN 0x00000001
+/* PCIE Bridge Register
+*/
+#define PEX_CSB_CTRL_OBPIOE 0x00000001
+#define PEX_CSB_CTRL_IBPIOE 0x00000002
+#define PEX_CSB_CTRL_WDMAE 0x00000004
+#define PEX_CSB_CTRL_RDMAE 0x00000008
+
+#define PEX_CSB_OBCTRL_PIOE 0x00000001
+#define PEX_CSB_OBCTRL_MEMWE 0x00000002
+#define PEX_CSB_OBCTRL_IOWE 0x00000004
+#define PEX_CSB_OBCTRL_CFGWE 0x00000008
+
+#define PEX_CSB_IBCTRL_PIOE 0x00000001
+
+#define PEX_OWAR_EN 0x00000001
+#define PEX_OWAR_TYPE_CFG 0x00000000
+#define PEX_OWAR_TYPE_IO 0x00000002
+#define PEX_OWAR_TYPE_MEM 0x00000004
+#define PEX_OWAR_RLXO 0x00000008
+#define PEX_OWAR_NANP 0x00000010
+#define PEX_OWAR_SIZE 0xFFFFF000
+
+#define PEX_IWAR_EN 0x00000001
+#define PEX_IWAR_TYPE_INT 0x00000000
+#define PEX_IWAR_TYPE_PF 0x00000004
+#define PEX_IWAR_TYPE_NO_PF 0x00000006
+#define PEX_IWAR_NSOV 0x00000008
+#define PEX_IWAR_NSNP 0x00000010
+#define PEX_IWAR_SIZE 0xFFFFF000
+#define PEX_IWAR_SIZE_1M 0x000FF000
+#define PEX_IWAR_SIZE_2M 0x001FF000
+#define PEX_IWAR_SIZE_4M 0x003FF000
+#define PEX_IWAR_SIZE_8M 0x007FF000
+#define PEX_IWAR_SIZE_16M 0x00FFF000
+#define PEX_IWAR_SIZE_32M 0x01FFF000
+#define PEX_IWAR_SIZE_64M 0x03FFF000
+#define PEX_IWAR_SIZE_128M 0x07FFF000
+#define PEX_IWAR_SIZE_256M 0x0FFFF000
+
+#define PEX_GCLK_RATIO 0x440
+
#ifndef __ASSEMBLY__
struct pci_region;
void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot);
+void mpc83xx_pcislave_unlock(int bus);
+void mpc83xx_pcie_init(int num_buses, struct pci_region **reg, int warmboot);
#endif
#endif /* __MPC83XX_H__ */
projects / platform / kernel / u-boot.git / blobdiff