#include <sys/types.h>
/* new uImage format support enabled on host */
-#define CONFIG_FIT 1
-#define CONFIG_OF_LIBFDT 1
+#define IMAGE_ENABLE_FIT 1
+#define IMAGE_ENABLE_OF_LIBFDT 1
#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
#define IMAGE_ENABLE_IGNORE 0
#define IMAGE_ENABLE_IGNORE 1
#define IMAGE_INDENT_STRING " "
+#define IMAGE_ENABLE_FIT CONFIG_IS_ENABLED(FIT)
+#define IMAGE_ENABLE_OF_LIBFDT CONFIG_IS_ENABLED(OF_LIBFDT)
+
#endif /* USE_HOSTCC */
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
#include <hash.h>
#include <libfdt.h>
#include <fdt_support.h>
#define IMAGE_ENABLE_SHA256 0
#endif
-#endif /* CONFIG_FIT */
-
-#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
-# define IMAGE_ENABLE_RAMDISK_HIGH 1
-#else
-# define IMAGE_ENABLE_RAMDISK_HIGH 0
-#endif
-
-#ifdef CONFIG_OF_LIBFDT
-# define IMAGE_ENABLE_OF_LIBFDT 1
-#else
-# define IMAGE_ENABLE_OF_LIBFDT 0
-#endif
+#endif /* IMAGE_ENABLE_FIT */
#ifdef CONFIG_SYS_BOOT_GET_CMDLINE
# define IMAGE_BOOT_GET_CMDLINE 1
# define IMAGE_OF_SYSTEM_SETUP 0
#endif
+enum ih_category {
+ IH_ARCH,
+ IH_COMP,
+ IH_OS,
+ IH_TYPE,
+
+ IH_COUNT,
+};
+
/*
* Operating System Codes
+ *
+ * The following are exposed to uImage header.
+ * Do not change values for backward compatibility.
*/
-#define IH_OS_INVALID 0 /* Invalid OS */
-#define IH_OS_OPENBSD 1 /* OpenBSD */
-#define IH_OS_NETBSD 2 /* NetBSD */
-#define IH_OS_FREEBSD 3 /* FreeBSD */
-#define IH_OS_4_4BSD 4 /* 4.4BSD */
-#define IH_OS_LINUX 5 /* Linux */
-#define IH_OS_SVR4 6 /* SVR4 */
-#define IH_OS_ESIX 7 /* Esix */
-#define IH_OS_SOLARIS 8 /* Solaris */
-#define IH_OS_IRIX 9 /* Irix */
-#define IH_OS_SCO 10 /* SCO */
-#define IH_OS_DELL 11 /* Dell */
-#define IH_OS_NCR 12 /* NCR */
-#define IH_OS_LYNXOS 13 /* LynxOS */
-#define IH_OS_VXWORKS 14 /* VxWorks */
-#define IH_OS_PSOS 15 /* pSOS */
-#define IH_OS_QNX 16 /* QNX */
-#define IH_OS_U_BOOT 17 /* Firmware */
-#define IH_OS_RTEMS 18 /* RTEMS */
-#define IH_OS_ARTOS 19 /* ARTOS */
-#define IH_OS_UNITY 20 /* Unity OS */
-#define IH_OS_INTEGRITY 21 /* INTEGRITY */
-#define IH_OS_OSE 22 /* OSE */
-#define IH_OS_PLAN9 23 /* Plan 9 */
-#define IH_OS_OPENRTOS 24 /* OpenRTOS */
+enum {
+ IH_OS_INVALID = 0, /* Invalid OS */
+ IH_OS_OPENBSD, /* OpenBSD */
+ IH_OS_NETBSD, /* NetBSD */
+ IH_OS_FREEBSD, /* FreeBSD */
+ IH_OS_4_4BSD, /* 4.4BSD */
+ IH_OS_LINUX, /* Linux */
+ IH_OS_SVR4, /* SVR4 */
+ IH_OS_ESIX, /* Esix */
+ IH_OS_SOLARIS, /* Solaris */
+ IH_OS_IRIX, /* Irix */
+ IH_OS_SCO, /* SCO */
+ IH_OS_DELL, /* Dell */
+ IH_OS_NCR, /* NCR */
+ IH_OS_LYNXOS, /* LynxOS */
+ IH_OS_VXWORKS, /* VxWorks */
+ IH_OS_PSOS, /* pSOS */
+ IH_OS_QNX, /* QNX */
+ IH_OS_U_BOOT, /* Firmware */
+ IH_OS_RTEMS, /* RTEMS */
+ IH_OS_ARTOS, /* ARTOS */
+ IH_OS_UNITY, /* Unity OS */
+ IH_OS_INTEGRITY, /* INTEGRITY */
+ IH_OS_OSE, /* OSE */
+ IH_OS_PLAN9, /* Plan 9 */
+ IH_OS_OPENRTOS, /* OpenRTOS */
+
+ IH_OS_COUNT,
+};
/*
* CPU Architecture Codes (supported by Linux)
+ *
+ * The following are exposed to uImage header.
+ * Do not change values for backward compatibility.
*/
-#define IH_ARCH_INVALID 0 /* Invalid CPU */
-#define IH_ARCH_ALPHA 1 /* Alpha */
-#define IH_ARCH_ARM 2 /* ARM */
-#define IH_ARCH_I386 3 /* Intel x86 */
-#define IH_ARCH_IA64 4 /* IA64 */
-#define IH_ARCH_MIPS 5 /* MIPS */
-#define IH_ARCH_MIPS64 6 /* MIPS 64 Bit */
-#define IH_ARCH_PPC 7 /* PowerPC */
-#define IH_ARCH_S390 8 /* IBM S390 */
-#define IH_ARCH_SH 9 /* SuperH */
-#define IH_ARCH_SPARC 10 /* Sparc */
-#define IH_ARCH_SPARC64 11 /* Sparc 64 Bit */
-#define IH_ARCH_M68K 12 /* M68K */
-#define IH_ARCH_MICROBLAZE 14 /* MicroBlaze */
-#define IH_ARCH_NIOS2 15 /* Nios-II */
-#define IH_ARCH_BLACKFIN 16 /* Blackfin */
-#define IH_ARCH_AVR32 17 /* AVR32 */
-#define IH_ARCH_ST200 18 /* STMicroelectronics ST200 */
-#define IH_ARCH_SANDBOX 19 /* Sandbox architecture (test only) */
-#define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */
-#define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */
-#define IH_ARCH_ARM64 22 /* ARM64 */
-#define IH_ARCH_ARC 23 /* Synopsys DesignWare ARC */
-#define IH_ARCH_X86_64 24 /* AMD x86_64, Intel and Via */
+enum {
+ IH_ARCH_INVALID = 0, /* Invalid CPU */
+ IH_ARCH_ALPHA, /* Alpha */
+ IH_ARCH_ARM, /* ARM */
+ IH_ARCH_I386, /* Intel x86 */
+ IH_ARCH_IA64, /* IA64 */
+ IH_ARCH_MIPS, /* MIPS */
+ IH_ARCH_MIPS64, /* MIPS 64 Bit */
+ IH_ARCH_PPC, /* PowerPC */
+ IH_ARCH_S390, /* IBM S390 */
+ IH_ARCH_SH, /* SuperH */
+ IH_ARCH_SPARC, /* Sparc */
+ IH_ARCH_SPARC64, /* Sparc 64 Bit */
+ IH_ARCH_M68K, /* M68K */
+ IH_ARCH_NIOS, /* Nios-32 */
+ IH_ARCH_MICROBLAZE, /* MicroBlaze */
+ IH_ARCH_NIOS2, /* Nios-II */
+ IH_ARCH_BLACKFIN, /* Blackfin */
+ IH_ARCH_AVR32, /* AVR32 */
+ IH_ARCH_ST200, /* STMicroelectronics ST200 */
+ IH_ARCH_SANDBOX, /* Sandbox architecture (test only) */
+ IH_ARCH_NDS32, /* ANDES Technology - NDS32 */
+ IH_ARCH_OPENRISC, /* OpenRISC 1000 */
+ IH_ARCH_ARM64, /* ARM64 */
+ IH_ARCH_ARC, /* Synopsys DesignWare ARC */
+ IH_ARCH_X86_64, /* AMD x86_64, Intel and Via */
+ IH_ARCH_XTENSA, /* Xtensa */
+
+ IH_ARCH_COUNT,
+};
/*
* Image Types
* U-Boot's command interpreter; this feature is especially
* useful when you configure U-Boot to use a real shell (hush)
* as command interpreter (=> Shell Scripts).
+ *
+ * The following are exposed to uImage header.
+ * Do not change values for backward compatibility.
*/
-#define IH_TYPE_INVALID 0 /* Invalid Image */
-#define IH_TYPE_STANDALONE 1 /* Standalone Program */
-#define IH_TYPE_KERNEL 2 /* OS Kernel Image */
-#define IH_TYPE_RAMDISK 3 /* RAMDisk Image */
-#define IH_TYPE_MULTI 4 /* Multi-File Image */
-#define IH_TYPE_FIRMWARE 5 /* Firmware Image */
-#define IH_TYPE_SCRIPT 6 /* Script file */
-#define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */
-#define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */
-#define IH_TYPE_KWBIMAGE 9 /* Kirkwood Boot Image */
-#define IH_TYPE_IMXIMAGE 10 /* Freescale IMXBoot Image */
-#define IH_TYPE_UBLIMAGE 11 /* Davinci UBL Image */
-#define IH_TYPE_OMAPIMAGE 12 /* TI OMAP Config Header Image */
-#define IH_TYPE_AISIMAGE 13 /* TI Davinci AIS Image */
-#define IH_TYPE_KERNEL_NOLOAD 14 /* OS Kernel Image, can run from any load address */
-#define IH_TYPE_PBLIMAGE 15 /* Freescale PBL Boot Image */
-#define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */
-#define IH_TYPE_GPIMAGE 17 /* TI Keystone GPHeader Image */
-#define IH_TYPE_ATMELIMAGE 18 /* ATMEL ROM bootable Image */
-#define IH_TYPE_SOCFPGAIMAGE 19 /* Altera SOCFPGA Preloader */
-#define IH_TYPE_X86_SETUP 20 /* x86 setup.bin Image */
-#define IH_TYPE_LPC32XXIMAGE 21 /* x86 setup.bin Image */
-#define IH_TYPE_LOADABLE 22 /* A list of typeless images */
-#define IH_TYPE_RKIMAGE 23 /* Rockchip Boot Image */
-#define IH_TYPE_RKSD 24 /* Rockchip SD card */
-#define IH_TYPE_RKSPI 25 /* Rockchip SPI image */
-
-#define IH_TYPE_COUNT 26 /* Number of image types */
+enum {
+ IH_TYPE_INVALID = 0, /* Invalid Image */
+ IH_TYPE_STANDALONE, /* Standalone Program */
+ IH_TYPE_KERNEL, /* OS Kernel Image */
+ IH_TYPE_RAMDISK, /* RAMDisk Image */
+ IH_TYPE_MULTI, /* Multi-File Image */
+ IH_TYPE_FIRMWARE, /* Firmware Image */
+ IH_TYPE_SCRIPT, /* Script file */
+ IH_TYPE_FILESYSTEM, /* Filesystem Image (any type) */
+ IH_TYPE_FLATDT, /* Binary Flat Device Tree Blob */
+ IH_TYPE_KWBIMAGE, /* Kirkwood Boot Image */
+ IH_TYPE_IMXIMAGE, /* Freescale IMXBoot Image */
+ IH_TYPE_UBLIMAGE, /* Davinci UBL Image */
+ IH_TYPE_OMAPIMAGE, /* TI OMAP Config Header Image */
+ IH_TYPE_AISIMAGE, /* TI Davinci AIS Image */
+ /* OS Kernel Image, can run from any load address */
+ IH_TYPE_KERNEL_NOLOAD,
+ IH_TYPE_PBLIMAGE, /* Freescale PBL Boot Image */
+ IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */
+ IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */
+ IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */
+ IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA Preloader */
+ IH_TYPE_X86_SETUP, /* x86 setup.bin Image */
+ IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */
+ IH_TYPE_LOADABLE, /* A list of typeless images */
+ IH_TYPE_RKIMAGE, /* Rockchip Boot Image */
+ IH_TYPE_RKSD, /* Rockchip SD card */
+ IH_TYPE_RKSPI, /* Rockchip SPI image */
+ IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */
+ IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */
+ IH_TYPE_FPGA, /* FPGA Image */
+ IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */
+ IH_TYPE_TEE, /* Trusted Execution Environment OS Image */
+ IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */
+
+ IH_TYPE_COUNT, /* Number of image types */
+};
/*
* Compression Types
+ *
+ * The following are exposed to uImage header.
+ * Do not change values for backward compatibility.
*/
-#define IH_COMP_NONE 0 /* No Compression Used */
-#define IH_COMP_GZIP 1 /* gzip Compression Used */
-#define IH_COMP_BZIP2 2 /* bzip2 Compression Used */
-#define IH_COMP_LZMA 3 /* lzma Compression Used */
-#define IH_COMP_LZO 4 /* lzo Compression Used */
-#define IH_COMP_LZ4 5 /* lz4 Compression Used */
+enum {
+ IH_COMP_NONE = 0, /* No Compression Used */
+ IH_COMP_GZIP, /* gzip Compression Used */
+ IH_COMP_BZIP2, /* bzip2 Compression Used */
+ IH_COMP_LZMA, /* lzma Compression Used */
+ IH_COMP_LZO, /* lzo Compression Used */
+ IH_COMP_LZ4, /* lz4 Compression Used */
+
+ IH_COMP_COUNT,
+};
#define IH_MAGIC 0x27051956 /* Image Magic Number */
#define IH_NMLEN 32 /* Image Name Length */
image_header_t legacy_hdr_os_copy; /* header copy */
ulong legacy_hdr_valid;
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
const char *fit_uname_cfg; /* configuration node unit name */
void *fit_hdr_os; /* os FIT image header */
char *get_table_entry_name(const table_entry_t *table, char *msg, int id);
const char *genimg_get_os_name(uint8_t os);
+
+/**
+ * genimg_get_os_short_name() - get the short name for an OS
+ *
+ * @param os OS (IH_OS_...)
+ * @return OS short name, or "unknown" if unknown
+ */
+const char *genimg_get_os_short_name(uint8_t comp);
+
const char *genimg_get_arch_name(uint8_t arch);
+
+/**
+ * genimg_get_arch_short_name() - get the short name for an architecture
+ *
+ * @param arch Architecture type (IH_ARCH_...)
+ * @return architecture short name, or "unknown" if unknown
+ */
+const char *genimg_get_arch_short_name(uint8_t arch);
+
const char *genimg_get_type_name(uint8_t type);
/**
const char *genimg_get_type_short_name(uint8_t type);
const char *genimg_get_comp_name(uint8_t comp);
+
+/**
+ * genimg_get_comp_short_name() - get the short name for a compression method
+ *
+ * @param comp compression method (IH_COMP_...)
+ * @return compression method short name, or "unknown" if unknown
+ */
+const char *genimg_get_comp_short_name(uint8_t comp);
+
+/**
+ * genimg_get_cat_name() - Get the name of an item in a category
+ *
+ * @category: Category of item
+ * @id: Item ID
+ * @return name of item, or "Unknown ..." if unknown
+ */
+const char *genimg_get_cat_name(enum ih_category category, uint id);
+
+/**
+ * genimg_get_cat_short_name() - Get the short name of an item in a category
+ *
+ * @category: Category of item
+ * @id: Item ID
+ * @return short name of item, or "Unknown ..." if unknown
+ */
+const char *genimg_get_cat_short_name(enum ih_category category, uint id);
+
+/**
+ * genimg_get_cat_count() - Get the number of items in a category
+ *
+ * @category: Category to check
+ * @return the number of items in the category (IH_xxx_COUNT)
+ */
+int genimg_get_cat_count(enum ih_category category);
+
+/**
+ * genimg_get_cat_desc() - Get the description of a category
+ *
+ * @return the description of a category, e.g. "architecture". This
+ * effectively converts the enum to a string.
+ */
+const char *genimg_get_cat_desc(enum ih_category category);
+
int genimg_get_os_id(const char *name);
int genimg_get_arch_id(const char *name);
int genimg_get_type_id(const char *name);
int genimg_has_config(bootm_headers_t *images);
ulong genimg_get_image(ulong img_addr);
+int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
+ uint8_t arch, const ulong *ld_start, ulong * const ld_len);
int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, ulong *rd_start, ulong *rd_end);
/*******************************************************************/
/* New uImage format specific code (prefixed with fit_) */
/*******************************************************************/
-#if defined(CONFIG_FIT)
#define FIT_IMAGES_PATH "/images"
#define FIT_CONFS_PATH "/configurations"
/* image node */
#define FIT_DATA_PROP "data"
+#define FIT_DATA_OFFSET_PROP "data-offset"
+#define FIT_DATA_SIZE_PROP "data-size"
#define FIT_TIMESTAMP_PROP "timestamp"
#define FIT_DESC_PROP "description"
#define FIT_ARCH_PROP "arch"
#define FIT_LOADABLE_PROP "loadables"
#define FIT_DEFAULT_PROP "default"
#define FIT_SETUP_PROP "setup"
+#define FIT_FPGA_PROP "fpga"
#define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE
+#if IMAGE_ENABLE_FIT
/* cmdline argument format parsing */
int fit_parse_conf(const char *spec, ulong addr_curr,
ulong *addr, const char **conf_name);
* returns:
* end address of the FIT image (blob) in memory
*/
-static inline ulong fit_get_end(const void *fit)
-{
- return (ulong)fit + fdt_totalsize(fit);
-}
+ulong fit_get_end(const void *fit);
/**
* fit_get_name - get FIT node name
int fit_image_get_entry(const void *fit, int noffset, ulong *entry);
int fit_image_get_data(const void *fit, int noffset,
const void **data, size_t *size);
+int fit_image_get_data_offset(const void *fit, int noffset, int *data_offset);
+int fit_image_get_data_size(const void *fit, int noffset, int *data_size);
int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
* @fit: Pointer to the FIT format image header
* @comment: Comment to add to signature nodes
* @require_keys: Mark all keys as 'required'
+ * @engine_id: Engine to use for signing
*
* Adds hash values for all component images in the FIT blob.
* Hashes are calculated for all component images which have hash subnodes
* libfdt error code, on failure
*/
int fit_add_verification_data(const char *keydir, void *keydest, void *fit,
- const char *comment, int require_keys);
+ const char *comment, int require_keys,
+ const char *engine_id);
int fit_image_verify(const void *fit, int noffset);
int fit_config_verify(const void *fit, int conf_noffset);
const char *keyname; /* Name of key to use */
void *fit; /* Pointer to FIT blob */
int node_offset; /* Offset of signature node */
- struct image_sig_algo *algo; /* Algorithm information */
+ const char *name; /* Algorithm name */
+ struct checksum_algo *checksum; /* Checksum algorithm information */
+ struct crypto_algo *crypto; /* Crypto algorithm information */
const void *fdt_blob; /* FDT containing public keys */
int required_keynode; /* Node offset of key to use: -1=any */
const char *require_keys; /* Value for 'required' property */
+ const char *engine_id; /* Engine to use for signing */
};
+#endif /* Allow struct image_region to always be defined for rsa.h */
/* A part of an image, used for hashing */
struct image_region {
int size;
};
+#if IMAGE_ENABLE_FIT
+
#if IMAGE_ENABLE_VERIFY
# include <u-boot/rsa-checksum.h>
#endif
struct checksum_algo {
const char *name;
const int checksum_len;
- const int pad_len;
+ const int der_len;
+ const uint8_t *der_prefix;
#if IMAGE_ENABLE_SIGN
const EVP_MD *(*calculate_sign)(void);
#endif
int (*calculate)(const char *name,
const struct image_region region[],
int region_count, uint8_t *checksum);
- const uint8_t *rsa_padding;
};
-struct image_sig_algo {
+struct crypto_algo {
const char *name; /* Name of algorithm */
+ const int key_len;
/**
* sign() - calculate and return signature for given input data
int (*verify)(struct image_sign_info *info,
const struct image_region region[], int region_count,
uint8_t *sig, uint sig_len);
-
- /* pointer to checksum algorithm */
- struct checksum_algo *checksum;
};
/**
- * image_get_sig_algo() - Look up a signature algortihm
+ * image_get_checksum_algo() - Look up a checksum algorithm
+ *
+ * @param full_name Name of algorithm in the form "checksum,crypto"
+ * @return pointer to algorithm information, or NULL if not found
+ */
+struct checksum_algo *image_get_checksum_algo(const char *full_name);
+
+/**
+ * image_get_crypto_algo() - Look up a cryptosystem algorithm
*
- * @param name Name of algorithm
+ * @param full_name Name of algorithm in the form "checksum,crypto"
* @return pointer to algorithm information, or NULL if not found
*/
-struct image_sig_algo *image_get_sig_algo(const char *name);
+struct crypto_algo *image_get_crypto_algo(const char *full_name);
/**
* fit_image_verify_required_sigs() - Verify signatures marked as 'required'
ulong *rd_data, ulong *rd_len);
ulong android_image_get_end(const struct andr_img_hdr *hdr);
ulong android_image_get_kload(const struct andr_img_hdr *hdr);
+void android_print_contents(const struct andr_img_hdr *hdr);
#endif /* CONFIG_ANDROID_BOOT_IMAGE */
+/**
+ * board_fit_config_name_match() - Check for a matching board name
+ *
+ * This is used when SPL loads a FIT containing multiple device tree files
+ * and wants to work out which one to use. The description of each one is
+ * passed to this function. The description comes from the 'description' field
+ * in each (FDT) image node.
+ *
+ * @name: Device tree description
+ * @return 0 if this device tree should be used, non-zero to try the next
+ */
+int board_fit_config_name_match(const char *name);
+
+#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
+/**
+ * board_fit_image_post_process() - Do any post-process on FIT binary data
+ *
+ * This is used to do any sort of image manipulation, verification, decryption
+ * etc. in a platform or board specific way. Obviously, anything done here would
+ * need to be comprehended in how the images were prepared before being injected
+ * into the FIT creation (i.e. the binary blobs would have been pre-processed
+ * before being added to the FIT image).
+ *
+ * @image: pointer to the image start pointer
+ * @size: pointer to the image size
+ * @return no return value (failure should be handled internally)
+ */
+void board_fit_image_post_process(void **p_image, size_t *p_size);
+#endif /* CONFIG_SPL_FIT_IMAGE_POST_PROCESS */
+
+/**
+ * Mapping of image types to function handlers to be invoked on the associated
+ * loaded images
+ *
+ * @type: Type of image, I.E. IH_TYPE_*
+ * @handler: Function to call on loaded image
+ */
+struct fit_loadable_tbl {
+ int type;
+ /**
+ * handler() - Process a loaded image
+ *
+ * @data: Pointer to start of loaded image data
+ * @size: Size of loaded image data
+ */
+ void (*handler)(ulong data, size_t size);
+};
+
+/*
+ * Define a FIT loadable image type handler
+ *
+ * _type is a valid uimage_type ID as defined in the "Image Type" enum above
+ * _handler is the handler function to call after this image type is loaded
+ */
+#define U_BOOT_FIT_LOADABLE_HANDLER(_type, _handler) \
+ ll_entry_declare(struct fit_loadable_tbl, _function, fit_loadable) = { \
+ .type = _type, \
+ .handler = _handler, \
+ }
+
#endif /* __IMAGE_H__ */