*/
typedef phys_addr_t fdt_addr_t;
typedef phys_size_t fdt_size_t;
+
#ifdef CONFIG_PHYS_64BIT
#define FDT_ADDR_T_NONE (-1U)
#define fdt_addr_to_cpu(reg) be64_to_cpu(reg)
#define fdt_size_to_cpu(reg) be64_to_cpu(reg)
+#define cpu_to_fdt_addr(reg) cpu_to_be64(reg)
+#define cpu_to_fdt_size(reg) cpu_to_be64(reg)
typedef fdt64_t fdt_val_t;
#else
#define FDT_ADDR_T_NONE (-1U)
#define fdt_addr_to_cpu(reg) be32_to_cpu(reg)
#define fdt_size_to_cpu(reg) be32_to_cpu(reg)
+#define cpu_to_fdt_addr(reg) cpu_to_be32(reg)
+#define cpu_to_fdt_size(reg) cpu_to_be32(reg)
typedef fdt32_t fdt_val_t;
#endif
#define SPL_BUILD 0
#endif
-#if CONFIG_IS_ENABLED(OF_PRIOR_STAGE)
+#ifdef CONFIG_OF_PRIOR_STAGE
extern phys_addr_t prior_stage_fdt_address;
#endif
u32 phys_lo;
};
+extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
+extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */
+
/**
* Compute the size of a resource.
*
/* Tegra210 XUSB pad controller */
COMPAT_SMSC_LAN9215, /* SMSC 10/100 Ethernet LAN9215 */
COMPAT_SAMSUNG_EXYNOS5_SROMC, /* Exynos5 SROMC */
- COMPAT_SAMSUNG_S3C2440_I2C, /* Exynos I2C Controller */
- COMPAT_SAMSUNG_EXYNOS5_SOUND, /* Exynos Sound */
- COMPAT_WOLFSON_WM8994_CODEC, /* Wolfson WM8994 Sound Codec */
COMPAT_SAMSUNG_EXYNOS_USB_PHY, /* Exynos phy controller for usb2.0 */
COMPAT_SAMSUNG_EXYNOS5_USB3_PHY,/* Exynos phy controller for usb3.0 */
COMPAT_SAMSUNG_EXYNOS_TMU, /* Exynos TMU */
COMPAT_SAMSUNG_EXYNOS_MIPI_DSI, /* Exynos mipi dsi */
COMPAT_SAMSUNG_EXYNOS_DWMMC, /* Exynos DWMMC controller */
- COMPAT_SAMSUNG_EXYNOS_MMC, /* Exynos MMC controller */
COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */
- COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */
- COMPAT_SAMSUNG_EXYNOS5_I2C, /* Exynos5 High Speed I2C Controller */
COMPAT_SAMSUNG_EXYNOS_SYSMMU, /* Exynos sysmmu */
COMPAT_INTEL_MICROCODE, /* Intel microcode update */
- COMPAT_AMS_AS3722, /* AMS AS3722 PMIC */
COMPAT_INTEL_QRK_MRC, /* Intel Quark MRC */
COMPAT_ALTERA_SOCFPGA_DWMAC, /* SoCFPGA Ethernet controller */
COMPAT_ALTERA_SOCFPGA_DWMMC, /* SoCFPGA DWMMC controller */
const char *prop_name, fdt_size_t *sizep);
/**
- * Look at an address property in a node and return the pci address which
- * corresponds to the given type in the form of fdt_pci_addr.
- * The property must hold one fdt_pci_addr with a lengh.
- *
- * @param blob FDT blob
- * @param node node to examine
- * @param type pci address type (FDT_PCI_SPACE_xxx)
- * @param prop_name name of property to find
- * @param addr returns pci address in the form of fdt_pci_addr
- * @return 0 if ok, -ENOENT if the property did not exist, -EINVAL if the
- * format of the property was invalid, -ENXIO if the requested
- * address type was not found
- */
-int fdtdec_get_pci_addr(const void *blob, int node, enum fdt_pci_space type,
- const char *prop_name, struct fdt_pci_addr *addr);
-
-/**
* Look at the compatible property of a device node that represents a PCI
* device and extract pci vendor id and device id from it.
*
* @param bar returns base address of the pci device's registers
* @return 0 if ok, negative on error
*/
-int fdtdec_get_pci_bar32(struct udevice *dev, struct fdt_pci_addr *addr,
+int fdtdec_get_pci_bar32(const struct udevice *dev, struct fdt_pci_addr *addr,
u32 *bar);
/**
int *seqp);
/**
+ * Get the highest alias number for susbystem.
+ *
+ * It parses all aliases and find out highest recorded alias for subsystem.
+ * Aliases are of the form <base><num> where <num> is the sequence number.
+ *
+ * @param blob Device tree blob (if NULL, then error is returned)
+ * @param base Base name for alias susbystem (before the number)
+ *
+ * @return 0 highest alias ID, -1 if not found
+ */
+int fdtdec_get_alias_highest_id(const void *blob, const char *base);
+
+/**
* Get a property from the /chosen node
*
* @param blob Device tree blob (if NULL, then NULL is returned)
int fdtdec_setup_memory_banksize(void);
/**
+ * fdtdec_set_ethernet_mac_address() - set MAC address for default interface
+ *
+ * Looks up the default interface via the "ethernet" alias (in the /aliases
+ * node) and stores the given MAC in its "local-mac-address" property. This
+ * is useful on platforms that store the MAC address in a custom location.
+ * Board code can call this in the late init stage to make sure that the
+ * interface device tree node has the right MAC address configured for the
+ * Ethernet uclass to pick it up.
+ *
+ * Typically the FDT passed into this function will be U-Boot's control DTB.
+ * Given that a lot of code may be holding offsets to various nodes in that
+ * tree, this code will only set the "local-mac-address" property in-place,
+ * which means that it needs to exist and have space for the 6-byte address.
+ * This ensures that the operation is non-destructive and does not invalidate
+ * offsets that other drivers may be using.
+ *
+ * @param fdt FDT blob
+ * @param mac buffer containing the MAC address to set
+ * @param size size of MAC address
+ * @return 0 on success or a negative error code on failure
+ */
+int fdtdec_set_ethernet_mac_address(void *fdt, const u8 *mac, size_t size);
+
+/**
+ * fdtdec_set_phandle() - sets the phandle of a given node
+ *
+ * @param blob FDT blob
+ * @param node offset in the FDT blob of the node whose phandle is to
+ * be set
+ * @param phandle phandle to set for the given node
+ * @return 0 on success or a negative error code on failure
+ */
+static inline int fdtdec_set_phandle(void *blob, int node, uint32_t phandle)
+{
+ return fdt_setprop_u32(blob, node, "phandle", phandle);
+}
+
+/**
+ * fdtdec_add_reserved_memory() - add or find a reserved-memory node
+ *
+ * If a reserved-memory node already exists for the given carveout, a phandle
+ * for that node will be returned. Otherwise a new node will be created and a
+ * phandle corresponding to it will be returned.
+ *
+ * See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+ * for details on how to use reserved memory regions.
+ *
+ * As an example, consider the following code snippet:
+ *
+ * struct fdt_memory fb = {
+ * .start = 0x92cb3000,
+ * .end = 0x934b2fff,
+ * };
+ * uint32_t phandle;
+ *
+ * fdtdec_add_reserved_memory(fdt, "framebuffer", &fb, &phandle);
+ *
+ * This results in the following subnode being added to the top-level
+ * /reserved-memory node:
+ *
+ * reserved-memory {
+ * #address-cells = <0x00000002>;
+ * #size-cells = <0x00000002>;
+ * ranges;
+ *
+ * framebuffer@92cb3000 {
+ * reg = <0x00000000 0x92cb3000 0x00000000 0x00800000>;
+ * phandle = <0x0000004d>;
+ * };
+ * };
+ *
+ * If the top-level /reserved-memory node does not exist, it will be created.
+ * The phandle returned from the function call can be used to reference this
+ * reserved memory region from other nodes.
+ *
+ * See fdtdec_set_carveout() for a more elaborate example.
+ *
+ * @param blob FDT blob
+ * @param basename base name of the node to create
+ * @param carveout information about the carveout region
+ * @param phandlep return location for the phandle of the carveout region
+ * can be NULL if no phandle should be added
+ * @return 0 on success or a negative error code on failure
+ */
+int fdtdec_add_reserved_memory(void *blob, const char *basename,
+ const struct fdt_memory *carveout,
+ uint32_t *phandlep);
+
+/**
+ * fdtdec_get_carveout() - reads a carveout from an FDT
+ *
+ * Reads information about a carveout region from an FDT. The carveout is a
+ * referenced by its phandle that is read from a given property in a given
+ * node.
+ *
+ * @param blob FDT blob
+ * @param node name of a node
+ * @param name name of the property in the given node that contains
+ * the phandle for the carveout
+ * @param index index of the phandle for which to read the carveout
+ * @param carveout return location for the carveout information
+ * @return 0 on success or a negative error code on failure
+ */
+int fdtdec_get_carveout(const void *blob, const char *node, const char *name,
+ unsigned int index, struct fdt_memory *carveout);
+
+/**
+ * fdtdec_set_carveout() - sets a carveout region for a given node
+ *
+ * Sets a carveout region for a given node. If a reserved-memory node already
+ * exists for the carveout, the phandle for that node will be reused. If no
+ * such node exists, a new one will be created and a phandle to it stored in
+ * a specified property of the given node.
+ *
+ * As an example, consider the following code snippet:
+ *
+ * const char *node = "/host1x@50000000/dc@54240000";
+ * struct fdt_memory fb = {
+ * .start = 0x92cb3000,
+ * .end = 0x934b2fff,
+ * };
+ *
+ * fdtdec_set_carveout(fdt, node, "memory-region", 0, "framebuffer", &fb);
+ *
+ * dc@54200000 is a display controller and was set up by the bootloader to
+ * scan out the framebuffer specified by "fb". This would cause the following
+ * reserved memory region to be added:
+ *
+ * reserved-memory {
+ * #address-cells = <0x00000002>;
+ * #size-cells = <0x00000002>;
+ * ranges;
+ *
+ * framebuffer@92cb3000 {
+ * reg = <0x00000000 0x92cb3000 0x00000000 0x00800000>;
+ * phandle = <0x0000004d>;
+ * };
+ * };
+ *
+ * A "memory-region" property will also be added to the node referenced by the
+ * offset parameter.
+ *
+ * host1x@50000000 {
+ * ...
+ *
+ * dc@54240000 {
+ * ...
+ * memory-region = <0x0000004d>;
+ * ...
+ * };
+ *
+ * ...
+ * };
+ *
+ * @param blob FDT blob
+ * @param node name of the node to add the carveout to
+ * @param prop_name name of the property in which to store the phandle of
+ * the carveout
+ * @param index index of the phandle to store
+ * @param name base name of the reserved-memory node to create
+ * @param carveout information about the carveout to add
+ * @return 0 on success or a negative error code on failure
+ */
+int fdtdec_set_carveout(void *blob, const char *node, const char *prop_name,
+ unsigned int index, const char *name,
+ const struct fdt_memory *carveout);
+
+/**
* Set up the device tree ready for use
*/
int fdtdec_setup(void);
/**
+ * Perform board-specific early DT adjustments
+ */
+int fdtdec_board_setup(const void *fdt_blob);
+
+#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
+/**
+ * fdtdec_resetup() - Set up the device tree again
+ *
+ * The main difference with fdtdec_setup() is that it returns if the fdt has
+ * changed because a better match has been found.
+ * This is typically used for boards that rely on a DM driver to detect the
+ * board type. This function sould be called by the board code after the stuff
+ * needed by board_fit_config_name_match() to operate porperly is available.
+ * If this functions signals that a rescan is necessary, the board code must
+ * unbind all the drivers using dm_uninit() and then rescan the DT with
+ * dm_init_and_scan().
+ *
+ * @param rescan Returns a flag indicating that fdt has changed and rescanning
+ * the fdt is required
+ *
+ * @return 0 if OK, -ve on error
+ */
+int fdtdec_resetup(int *rescan);
+#endif
+
+/**
* Board-specific FDT initialization. Returns the address to a device tree blob.
* Called when CONFIG_OF_BOARD is defined, or if CONFIG_OF_SEPARATE is defined
* and the board implements it.
*/
+void *board_fdt_blob_setup(void);
/*
* Decode the size of memory