COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */
COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */
COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */
- COMPAT_NVIDIA_TEGRA124_PMC, /* Tegra 124 power mgmt controller */
- COMPAT_NVIDIA_TEGRA186_SDMMC, /* Tegra186 SDMMC controller */
- COMPAT_NVIDIA_TEGRA210_SDMMC, /* Tegra210 SDMMC controller */
- COMPAT_NVIDIA_TEGRA124_SDMMC, /* Tegra124 SDMMC controller */
- COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */
- COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */
COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL,
/* Tegra124 XUSB pad controller */
COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL,
COMPAT_INTEL_BAYTRAIL_FSP_MDP, /* Intel FSP memory-down params */
COMPAT_INTEL_IVYBRIDGE_FSP, /* Intel Ivy Bridge FSP */
COMPAT_SUNXI_NAND, /* SUNXI NAND controller */
+ COMPAT_ALTERA_SOCFPGA_CLK, /* SoCFPGA Clock initialization */
+ COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE, /* SoCFPGA pinctrl-single */
+ COMPAT_ALTERA_SOCFPGA_H2F_BRG, /* SoCFPGA hps2fpga bridge */
+ COMPAT_ALTERA_SOCFPGA_LWH2F_BRG, /* SoCFPGA lwhps2fpga bridge */
+ COMPAT_ALTERA_SOCFPGA_F2H_BRG, /* SoCFPGA fpga2hps bridge */
+ COMPAT_ALTERA_SOCFPGA_F2SDR0, /* SoCFPGA fpga2SDRAM0 bridge */
+ COMPAT_ALTERA_SOCFPGA_F2SDR1, /* SoCFPGA fpga2SDRAM1 bridge */
+ COMPAT_ALTERA_SOCFPGA_F2SDR2, /* SoCFPGA fpga2SDRAM2 bridge */
COMPAT_COUNT,
};
int fdtdec_decode_region(const void *blob, int node, const char *prop_name,
fdt_addr_t *basep, fdt_size_t *sizep);
-enum fmap_compress_t {
- FMAP_COMPRESS_NONE,
- FMAP_COMPRESS_LZO,
-};
-
-enum fmap_hash_t {
- FMAP_HASH_NONE,
- FMAP_HASH_SHA1,
- FMAP_HASH_SHA256,
-};
-
-/* A flash map entry, containing an offset and length */
-struct fmap_entry {
- uint32_t offset;
- uint32_t length;
- uint32_t used; /* Number of bytes used in region */
- enum fmap_compress_t compress_algo; /* Compression type */
- enum fmap_hash_t hash_algo; /* Hash algorithm */
- const uint8_t *hash; /* Hash value */
- int hash_size; /* Hash size */
-};
-
-/**
- * Read a flash entry from the fdt
- *
- * @param blob FDT blob
- * @param node Offset of node to read
- * @param name Name of node being read
- * @param entry Place to put offset and size of this node
- * @return 0 if ok, -ve on error
- */
-int fdtdec_read_fmap_entry(const void *blob, int node, const char *name,
- struct fmap_entry *entry);
-
/**
* Obtain an indexed resource from a device property.
*
struct timing_entry vsync_len; /* ver. sync len */
enum display_flags flags; /* display flags */
+ bool hdmi_monitor; /* is hdmi monitor? */
};
/**
*/
int fdtdec_decode_display_timing(const void *blob, int node, int index,
struct display_timing *config);
+
+/**
+ * fdtdec_setup_memory_size() - decode and setup gd->ram_size
+ *
+ * Decode the /memory 'reg' property to determine the size of the first memory
+ * bank, populate the global data with the size of the first bank of memory.
+ *
+ * This function should be called from a boards dram_init(). This helper
+ * function allows for boards to query the device tree for DRAM size instead of
+ * hard coding the value in the case where the memory size cannot be detected
+ * automatically.
+ *
+ * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or
+ * invalid
+ */
+int fdtdec_setup_memory_size(void);
+
+/**
+ * fdtdec_setup_memory_banksize() - decode and populate gd->bd->bi_dram
+ *
+ * Decode the /memory 'reg' property to determine the address and size of the
+ * memory banks. Use this data to populate the global data board info with the
+ * phys address and size of memory banks.
+ *
+ * This function should be called from a boards dram_init_banksize(). This
+ * helper function allows for boards to query the device tree for memory bank
+ * information instead of hard coding the information in cases where it cannot
+ * be detected automatically.
+ *
+ * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or
+ * invalid
+ */
+int fdtdec_setup_memory_banksize(void);
+
/**
* Set up the device tree ready for use
*/
int fdtdec_setup(void);
+/**
+ * Board-specific FDT initialization. Returns the address to a device tree blob.
+ * Called when CONFIG_OF_BOARD is defined.
+ */
+void *board_fdt_blob_setup(void);
+
#endif