#ifndef _I915_DRM_H_
#define _I915_DRM_H_
-#include "drm.h"
+#include <drm.h>
/* Please note that modifications to all structs defined here are
* subject to backwards-compatibility constraints.
*/
+/**
+ * DOC: uevents generated by i915 on it's device node
+ *
+ * I915_L3_PARITY_UEVENT - Generated when the driver receives a parity mismatch
+ * event from the gpu l3 cache. Additional information supplied is ROW,
+ * BANK, SUBBANK, SLICE of the affected cacheline. Userspace should keep
+ * track of these events and if a specific cache-line seems to have a
+ * persistent error remap it with the l3 remapping tool supplied in
+ * intel-gpu-tools. The value supplied with the event is always 1.
+ *
+ * I915_ERROR_UEVENT - Generated upon error detection, currently only via
+ * hangcheck. The error detection event is a good indicator of when things
+ * began to go badly. The value supplied with the event is a 1 upon error
+ * detection, and a 0 upon reset completion, signifying no more error
+ * exists. NOTE: Disabling hangcheck or reset via module parameter will
+ * cause the related events to not be seen.
+ *
+ * I915_RESET_UEVENT - Event is generated just before an attempt to reset the
+ * the GPU. The value supplied with the event is always 1. NOTE: Disable
+ * reset via module parameter will cause this event to not be seen.
+ */
+#define I915_L3_PARITY_UEVENT "L3_PARITY_ERROR"
+#define I915_ERROR_UEVENT "ERROR"
+#define I915_RESET_UEVENT "RESET"
/* Each region is a minimum of 16k, and there are at most 255 of them.
*/
#define DRM_I915_GEM_WAIT 0x2c
#define DRM_I915_GEM_CONTEXT_CREATE 0x2d
#define DRM_I915_GEM_CONTEXT_DESTROY 0x2e
+#define DRM_I915_GEM_SET_CACHING 0x2f
+#define DRM_I915_GEM_GET_CACHING 0x30
+#define DRM_I915_REG_READ 0x31
+#define DRM_I915_GET_RESET_STATS 0x32
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
#define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin)
#define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin)
#define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy)
+#define DRM_IOCTL_I915_GEM_SET_CACHING DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_SET_CACHING, struct drm_i915_gem_caching)
+#define DRM_IOCTL_I915_GEM_GET_CACHING DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_GET_CACHING, struct drm_i915_gem_caching)
#define DRM_IOCTL_I915_GEM_THROTTLE DRM_IO ( DRM_COMMAND_BASE + DRM_I915_GEM_THROTTLE)
#define DRM_IOCTL_I915_GEM_ENTERVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT)
#define DRM_IOCTL_I915_GEM_LEAVEVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT)
#define DRM_IOCTL_I915_GEM_WAIT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_WAIT, struct drm_i915_gem_wait)
#define DRM_IOCTL_I915_GEM_CONTEXT_CREATE DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_CREATE, struct drm_i915_gem_context_create)
#define DRM_IOCTL_I915_GEM_CONTEXT_DESTROY DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_DESTROY, struct drm_i915_gem_context_destroy)
+#define DRM_IOCTL_I915_REG_READ DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_REG_READ, struct drm_i915_reg_read)
+#define DRM_IOCTL_I915_GET_RESET_STATS DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GET_RESET_STATS, struct drm_i915_reset_stats)
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
#define I915_PARAM_HAS_LLC 17
#define I915_PARAM_HAS_ALIASING_PPGTT 18
#define I915_PARAM_HAS_WAIT_TIMEOUT 19
+#define I915_PARAM_HAS_SEMAPHORES 20
+#define I915_PARAM_HAS_PRIME_VMAP_FLUSH 21
+#define I915_PARAM_HAS_VEBOX 22
+#define I915_PARAM_HAS_SECURE_BATCHES 23
+#define I915_PARAM_HAS_PINNED_BATCHES 24
+#define I915_PARAM_HAS_EXEC_NO_RELOC 25
+#define I915_PARAM_HAS_EXEC_HANDLE_LUT 26
+#define I915_PARAM_HAS_WT 27
+#define I915_PARAM_CMD_PARSER_VERSION 28
typedef struct drm_i915_getparam {
int param;
__u64 offset;
#define EXEC_OBJECT_NEEDS_FENCE (1<<0)
+#define EXEC_OBJECT_NEEDS_GTT (1<<1)
+#define EXEC_OBJECT_WRITE (1<<2)
+#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_WRITE<<1)
__u64 flags;
+
__u64 rsvd1;
__u64 rsvd2;
};
#define I915_EXEC_RENDER (1<<0)
#define I915_EXEC_BSD (2<<0)
#define I915_EXEC_BLT (3<<0)
+#define I915_EXEC_VEBOX (4<<0)
/* Used for switching the constants addressing mode on gen4+ RENDER ring.
* Gen6+ only supports relative addressing to dynamic state (default) and
/** Resets the SO write offset registers for transform feedback on gen7. */
#define I915_EXEC_GEN7_SOL_RESET (1<<8)
+/** Request a privileged ("secure") batch buffer. Note only available for
+ * DRM_ROOT_ONLY | DRM_MASTER processes.
+ */
+#define I915_EXEC_SECURE (1<<9)
+
+/** Inform the kernel that the batch is and will always be pinned. This
+ * negates the requirement for a workaround to be performed to avoid
+ * an incoherent CS (such as can be found on 830/845). If this flag is
+ * not passed, the kernel will endeavour to make sure the batch is
+ * coherent with the CS before execution. If this flag is passed,
+ * userspace assumes the responsibility for ensuring the same.
+ */
+#define I915_EXEC_IS_PINNED (1<<10)
+
+/** Provide a hint to the kernel that the command stream and auxilliary
+ * state buffers already holds the correct presumed addresses and so the
+ * relocation process may be skipped if no buffers need to be moved in
+ * preparation for the execbuffer.
+ */
+#define I915_EXEC_NO_RELOC (1<<11)
+
+/** Use the reloc.handle as an index into the exec object array rather
+ * than as the per-file handle.
+ */
+#define I915_EXEC_HANDLE_LUT (1<<12)
+
+#define __I915_EXEC_UNKNOWN_FLAGS -(I915_EXEC_HANDLE_LUT<<1)
+
#define I915_EXEC_CONTEXT_ID_MASK (0xffffffff)
#define i915_execbuffer2_set_context_id(eb2, context) \
(eb2).rsvd1 = context & I915_EXEC_CONTEXT_ID_MASK
/** Handle of the buffer to check for busy */
__u32 handle;
- /** Return busy status (1 if busy, 0 if idle) */
+ /** Return busy status (1 if busy, 0 if idle).
+ * The high word is used to indicate on which rings the object
+ * currently resides:
+ * 16:31 - busy (r or r/w) rings (16 render, 17 bsd, 18 blt, etc)
+ */
__u32 busy;
};
+/**
+ * I915_CACHING_NONE
+ *
+ * GPU access is not coherent with cpu caches. Default for machines without an
+ * LLC.
+ */
+#define I915_CACHING_NONE 0
+/**
+ * I915_CACHING_CACHED
+ *
+ * GPU access is coherent with cpu caches and furthermore the data is cached in
+ * last-level caches shared between cpu cores and the gpu GT. Default on
+ * machines with HAS_LLC.
+ */
+#define I915_CACHING_CACHED 1
+/**
+ * I915_CACHING_DISPLAY
+ *
+ * Special GPU caching mode which is coherent with the scanout engines.
+ * Transparently falls back to I915_CACHING_NONE on platforms where no special
+ * cache mode (like write-through or gfdt flushing) is available. The kernel
+ * automatically sets this mode when using a buffer as a scanout target.
+ * Userspace can manually set this mode to avoid a costly stall and clflush in
+ * the hotpath of drawing the first frame.
+ */
+#define I915_CACHING_DISPLAY 2
+
+struct drm_i915_gem_caching {
+ /**
+ * Handle of the buffer to set/get the caching level of. */
+ __u32 handle;
+
+ /**
+ * Cacheing level to apply or return value
+ *
+ * bits0-15 are for generic caching control (i.e. the above defined
+ * values). bits16-31 are reserved for platform-specific variations
+ * (e.g. l3$ caching on gen7). */
+ __u32 caching;
+};
+
#define I915_TILING_NONE 0
#define I915_TILING_X 1
#define I915_TILING_Y 2
__u32 pad;
};
-#endif /* _I915_DRM_H_ */
+struct drm_i915_reg_read {
+ __u64 offset;
+ __u64 val; /* Return value */
+};
+
+struct drm_i915_reset_stats {
+ __u32 ctx_id;
+ __u32 flags;
+
+ /* All resets since boot/module reload, for all contexts */
+ __u32 reset_count;
+
+ /* Number of batches lost when active in GPU, for this context */
+ __u32 batch_active;
+
+ /* Number of batches lost pending for execution, for this context */
+ __u32 batch_pending;
+
+ __u32 pad;
+};
+
+#endif /* _I915_DRM_H_ */
projects / platform / upstream / libdrm.git / blobdiff