#include <ec_commands.h>
#include <fdtdec.h>
#include <cros_ec_message.h>
+#include <asm/gpio.h>
+#ifndef CONFIG_DM_CROS_EC
/* Which interface is the device on? */
enum cros_ec_interface_t {
CROS_EC_IF_NONE,
CROS_EC_IF_SPI,
CROS_EC_IF_I2C,
CROS_EC_IF_LPC, /* Intel Low Pin Count interface */
+ CROS_EC_IF_SANDBOX,
};
+#endif
/* Our configuration information */
struct cros_ec_dev {
+#ifdef CONFIG_DM_CROS_EC
+ struct udevice *dev; /* Transport device */
+#else
enum cros_ec_interface_t interface;
struct spi_slave *spi; /* Our SPI slave, if using SPI */
int node; /* Our node */
unsigned int addr; /* Device address (for I2C) */
unsigned int bus_num; /* Bus number (for I2C) */
unsigned int max_frequency; /* Maximum interface frequency */
- struct fdt_gpio_state ec_int; /* GPIO used as EC interrupt line */
- int cmd_version_is_supported; /* Device supports command versions */
+#endif
+ struct gpio_desc ec_int; /* GPIO used as EC interrupt line */
+ int protocol_version; /* Protocol version to use */
int optimise_flash_write; /* Don't write erased flash blocks */
/*
uint8_t data[CROS_EC_KEYSCAN_COLS];
};
+/* Holds information about the Chrome EC */
+struct fdt_cros_ec {
+ struct fmap_entry flash; /* Address and size of EC flash */
+ /*
+ * Byte value of erased flash, or -1 if not known. It is normally
+ * 0xff but some flash devices use 0 (e.g. STM32Lxxx)
+ */
+ int flash_erase_value;
+ struct fmap_entry region[EC_FLASH_REGION_COUNT];
+};
+
/**
* Read the ID of the CROS-EC device
*
};
/**
- * Set up the Chromium OS matrix keyboard protocol
+ * Initialise the Chromium OS EC driver
*
* @param blob Device tree blob containing setup information
* @param cros_ecp Returns pointer to the cros_ec device, or NULL if none
* @param info Place to put the info structure
*/
int cros_ec_info(struct cros_ec_dev *dev,
- struct ec_response_cros_ec_info *info);
+ struct ec_response_mkbp_info *info);
/**
* Read the host event flags
*/
struct cros_ec_dev *board_get_cros_ec_dev(void);
+#ifdef CONFIG_DM_CROS_EC
+
+struct dm_cros_ec_ops {
+ int (*check_version)(struct udevice *dev);
+ int (*command)(struct udevice *dev, uint8_t cmd, int cmd_version,
+ const uint8_t *dout, int dout_len,
+ uint8_t **dinp, int din_len);
+ int (*packet)(struct udevice *dev, int out_bytes, int in_bytes);
+};
+
+#define dm_cros_ec_get_ops(dev) \
+ ((struct dm_cros_ec_ops *)(dev)->driver->ops)
+
+int cros_ec_register(struct udevice *dev);
+
+#else /* !CONFIG_DM_CROS_EC */
/* Internal interfaces */
int cros_ec_i2c_init(struct cros_ec_dev *dev, const void *blob);
int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob);
int cros_ec_lpc_init(struct cros_ec_dev *dev, const void *blob);
+int cros_ec_sandbox_init(struct cros_ec_dev *dev, const void *blob);
/**
* Read information from the fdt for the i2c cros_ec interface
int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob);
/**
+ * Read information from the fdt for the sandbox cros_ec interface
+ *
+ * @param dev CROS-EC device
+ * @param blob Device tree blob
+ * @return 0 if ok, -1 if we failed to read all required information
+ */
+int cros_ec_sandbox_decode_fdt(struct cros_ec_dev *dev, const void *blob);
+
+/**
* Check whether the LPC interface supports new-style commands.
*
* LPC has its own way of doing this, which involves checking LPC values
- * visible to the host. Do this, and update dev->cmd_version_is_supported
- * accordingly.
+ * visible to the host. Do this, and update dev->protocol_version accordingly.
*
* @param dev CROS-EC device to check
*/
uint8_t **dinp, int din_len);
/**
+ * Send a packet to a CROS-EC device and return the response packet.
+ *
+ * Expects the request packet to be stored in dev->dout. Stores the response
+ * packet in dev->din.
+ *
+ * @param dev CROS-EC device
+ * @param out_bytes Size of request packet to output
+ * @param in_bytes Maximum size of response packet to receive
+ * @return number of bytes in response packet, or <0 on error
+ */
+int cros_ec_spi_packet(struct cros_ec_dev *dev, int out_bytes, int in_bytes);
+int cros_ec_sandbox_packet(struct cros_ec_dev *dev, int out_bytes,
+ int in_bytes);
+#endif
+
+/**
* Dump a block of data for a command.
*
* @param name Name for data (e.g. 'in', 'out')
*/
int cros_ec_get_error(void);
+/**
+ * Returns information from the FDT about the Chrome EC flash
+ *
+ * @param blob FDT blob to use
+ * @param node Node offset to read from
+ * @param config Structure to use to return information
+ */
+int cros_ec_decode_ec_flash(const void *blob, int node,
+ struct fdt_cros_ec *config);
+
+/**
+ * Check the current keyboard state, in case recovery mode is requested.
+ * This function is for sandbox only.
+ *
+ * @param ec CROS-EC device
+ */
+void cros_ec_check_keyboard(struct cros_ec_dev *dev);
+
+/*
+ * Tunnel an I2C transfer to the EC
+ *
+ * @param dev CROS-EC device
+ * @param chip Chip address (7-bit I2C address)
+ * @param addr Register address to read/write
+ * @param alen Length of register address in bytes
+ * @param buffer Buffer containing data to read/write
+ * @param len Length of buffer
+ * @param is_read 1 if this is a read, 0 if this is a write
+ */
+int cros_ec_i2c_xfer(struct cros_ec_dev *dev, uchar chip, uint addr,
+ int alen, uchar *buffer, int len, int is_read);
+
#endif