* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef enum {
- CONNECTION_WIFI_SECURITY_TYPE_NONE = 0, /**< Security disabled */
- CONNECTION_WIFI_SECURITY_TYPE_WEP = 1, /**< WEP */
- CONNECTION_WIFI_SECURITY_TYPE_WPA_PSK = 2, /**< WPA-PSK */
- CONNECTION_WIFI_SECURITY_TYPE_WPA2_PSK = 3, /**< WPA2-PSK */
- CONNECTION_WIFI_SECURITY_TYPE_EAP = 4, /**< EAP */
+ CONNECTION_WIFI_SECURITY_TYPE_NONE = 0, /**< Security disabled */
+ CONNECTION_WIFI_SECURITY_TYPE_WEP = 1, /**< WEP */
+ CONNECTION_WIFI_SECURITY_TYPE_WPA_PSK = 2, /**< WPA-PSK */
+ CONNECTION_WIFI_SECURITY_TYPE_WPA2_PSK = 3, /**< WPA2-PSK */
+ CONNECTION_WIFI_SECURITY_TYPE_EAP = 4, /**< EAP */
} connection_wifi_security_type_e;
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef enum {
- CONNECTION_WIFI_ENCRYPTION_TYPE_NONE = 0, /**< Encryption disabled */
- CONNECTION_WIFI_ENCRYPTION_TYPE_WEP = 1, /**< WEP */
- CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP = 2, /**< TKIP */
- CONNECTION_WIFI_ENCRYPTION_TYPE_AES = 3, /**< AES */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_NONE = 0, /**< Encryption disabled */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_WEP = 1, /**< WEP */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP = 2, /**< TKIP */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_AES = 3, /**< AES */
CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP_AES_MIXED = 4, /**< TKIP and AES are both supported */
} connection_wifi_encryption_type_e;
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef enum {
- CONNECTION_CELLULAR_SERVICE_TYPE_UNKNOWN = 0, /**< Unknown */
- CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET = 1, /**< Internet */
- CONNECTION_CELLULAR_SERVICE_TYPE_MMS = 2, /**< MMS */
+ CONNECTION_CELLULAR_SERVICE_TYPE_UNKNOWN = 0, /**< Unknown */
+ CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET = 1, /**< Internet */
+ CONNECTION_CELLULAR_SERVICE_TYPE_MMS = 2, /**< MMS */
CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET = 3, /**< Prepaid internet */
- CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_MMS = 4, /**< Prepaid MMS */
- CONNECTION_CELLULAR_SERVICE_TYPE_TETHERING = 5, /**< Tethering */
- CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION = 6, /**< Specific application */
+ CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_MMS = 4, /**< Prepaid MMS */
+ CONNECTION_CELLULAR_SERVICE_TYPE_TETHERING = 5, /**< Tethering */
+ CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION = 6, /**< Specific application */
} connection_cellular_service_type_e;
/**
* @brief Enumeration for cellular pdn type.
* @since_tizen 3.0
+ * @remarks Use #CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPV6 instead of
+ * CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPv6.
*/
typedef enum {
- CONNECTION_CELLULAR_PDN_TYPE_UNKNOWN = 0,
- CONNECTION_CELLULAR_PDN_TYPE_IPV4 = 1,
- CONNECTION_CELLULAR_PDN_TYPE_IPV6 = 2,
- CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPv6 = 3,
+ CONNECTION_CELLULAR_PDN_TYPE_UNKNOWN = 0, /**< Unknown */
+ CONNECTION_CELLULAR_PDN_TYPE_IPV4 = 1, /**< IPv4 */
+ CONNECTION_CELLULAR_PDN_TYPE_IPV6 = 2, /**< IPv6 */
+ CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPv6 = 3, /**< IPv4 and IPv6 (Deprecated since 4.0) */
+ CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPV6 = 4, /**< IPv4 and IPv6 (Since 4.0) */
} connection_cellular_pdn_type_e;
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef enum {
- CONNECTION_CELLULAR_AUTH_TYPE_NONE = 0, /**< No authentication */
- CONNECTION_CELLULAR_AUTH_TYPE_PAP = 1, /**< PAP authentication */
- CONNECTION_CELLULAR_AUTH_TYPE_CHAP = 2, /**< CHAP authentication */
+ CONNECTION_CELLULAR_AUTH_TYPE_NONE = 0, /**< No authentication */
+ CONNECTION_CELLULAR_AUTH_TYPE_PAP = 1, /**< PAP authentication */
+ CONNECTION_CELLULAR_AUTH_TYPE_CHAP = 2, /**< CHAP authentication */
} connection_cellular_auth_type_e;
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef enum {
- CONNECTION_PROFILE_STATE_DISCONNECTED = 0, /**< Disconnected state */
- CONNECTION_PROFILE_STATE_ASSOCIATION = 1, /**< Association state */
- CONNECTION_PROFILE_STATE_CONFIGURATION = 2, /**< Configuration state */
- CONNECTION_PROFILE_STATE_CONNECTED = 3, /**< Connected state */
+ CONNECTION_PROFILE_STATE_DISCONNECTED = 0, /**< Disconnected state */
+ CONNECTION_PROFILE_STATE_ASSOCIATION = 1, /**< Association state */
+ CONNECTION_PROFILE_STATE_CONFIGURATION = 2, /**< Configuration state */
+ CONNECTION_PROFILE_STATE_CONNECTED = 3, /**< Connected state */
} connection_profile_state_e;
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef enum {
- CONNECTION_ADDRESS_FAMILY_IPV4 = 0, /**< IPV4 Address type */
- CONNECTION_ADDRESS_FAMILY_IPV6 = 1, /**< IPV6 Address type */
+ CONNECTION_ADDRESS_FAMILY_IPV4 = 0, /**< IPV4 Address type */
+ CONNECTION_ADDRESS_FAMILY_IPV6 = 1, /**< IPV6 Address type */
} connection_address_family_e;
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef enum {
- CONNECTION_IP_CONFIG_TYPE_NONE = 0, /**< Not defined */
- CONNECTION_IP_CONFIG_TYPE_STATIC = 1, /**< Manual IP configuration */
- CONNECTION_IP_CONFIG_TYPE_DYNAMIC = 2, /**< Config IP using DHCP client*/
- CONNECTION_IP_CONFIG_TYPE_AUTO = 3, /**< Config IP from Auto IP pool (169.254/16). Later with DHCP client, if available */
- CONNECTION_IP_CONFIG_TYPE_FIXED = 4, /**< Indicates an IP address that can not be modified */
+ /**
+ * Not defined
+ */
+ CONNECTION_IP_CONFIG_TYPE_NONE = 0,
+
+ /**
+ * Manual IP configuration
+ */
+ CONNECTION_IP_CONFIG_TYPE_STATIC = 1,
+
+ /**
+ * Config IP using DHCP client (IPv4 Only)
+ */
+ CONNECTION_IP_CONFIG_TYPE_DYNAMIC = 2,
+
+ /**
+ * Config IP from Auto IP pool (169.254/16). Later with DHCP client, if available
+ */
+ CONNECTION_IP_CONFIG_TYPE_AUTO = 3,
+
+ /**
+ * Indicates an IP address that can not be modified (IPv4 Only)
+ */
+ CONNECTION_IP_CONFIG_TYPE_FIXED = 4,
+
} connection_ip_config_type_e;
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef enum {
- CONNECTION_PROXY_TYPE_DIRECT = 0, /**< Direct connection */
- CONNECTION_PROXY_TYPE_AUTO = 1, /**< Auto configuration(Use PAC file). If URL property is not set, DHCP/WPAD auto-discover will be tried */
- CONNECTION_PROXY_TYPE_MANUAL = 2, /**< Manual configuration */
+ /**
+ * Direct connection
+ */
+ CONNECTION_PROXY_TYPE_DIRECT = 0,
+
+ /**
+ * Auto configuration (use PAC file). If URL property is not set,
+ * DHCP/WPAD auto-discover will be tried
+ */
+ CONNECTION_PROXY_TYPE_AUTO = 1,
+
+ /**
+ * Manual configuration
+ */
+ CONNECTION_PROXY_TYPE_MANUAL = 2,
+
} connection_proxy_type_e;
+/**
+ * @brief Enumeration for DNS configuration type.
+ * @since_tizen 4.0
+ */
+typedef enum {
+ CONNECTION_DNS_CONFIG_TYPE_NONE = 0, /**< Not defined */
+ CONNECTION_DNS_CONFIG_TYPE_STATIC = 1, /**< Manual DNS configuration */
+ CONNECTION_DNS_CONFIG_TYPE_DYNAMIC = 2, /**< Config DNS using DHCP client */
+} connection_dns_config_type_e;
/**
* @brief Enumeration for network connection type.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef enum {
- CONNECTION_PROFILE_TYPE_CELLULAR = 0, /**< Cellular type */
- CONNECTION_PROFILE_TYPE_WIFI = 1, /**< Wi-Fi type */
- CONNECTION_PROFILE_TYPE_ETHERNET = 2, /**< Ethernet type */
- CONNECTION_PROFILE_TYPE_BT = 3, /**< Bluetooth type */
+ CONNECTION_PROFILE_TYPE_CELLULAR = 0, /**< Cellular type */
+ CONNECTION_PROFILE_TYPE_WIFI = 1, /**< Wi-Fi type */
+ CONNECTION_PROFILE_TYPE_ETHERNET = 2, /**< Ethernet type */
+ CONNECTION_PROFILE_TYPE_BT = 3, /**< Bluetooth type */
} connection_profile_type_e;
/**
* @brief Creates a profile handle.
- * @details The profile name, which you get from connection_profile_get_name(), will include the keyword you set.
+ * @details The profile name, which you get from connection_profile_get_name()
+ * will include the keyword you set.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.get
* @remarks You must release @a profile using connection_profile_destroy().
- * @param[in] type The type of profile \n
- * #CONNECTION_PROFILE_TYPE_CELLULAR and #CONNECTION_PROFILE_TYPE_WIFI are supported
- * @param[in] keyword The keyword included in profile name
- * @param[out] profile The handle of the profile
+ * @param[in] type The type of profile \n
+ * #CONNECTION_PROFILE_TYPE_CELLULAR and #CONNECTION_PROFILE_TYPE_WIFI are supported
+ * @param[in] keyword The keyword included in profile name
+ * @param[out] profile The handle of the profile
* @return @c 0 on success,
* otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
* @see connection_profile_destroy()
* @see connection_profile_get_name()
*/
-int connection_profile_create(connection_profile_type_e type, const char* keyword, connection_profile_h* profile);
+int connection_profile_create(connection_profile_type_e type,
+ const char *keyword, connection_profile_h *profile);
/**
* @brief Destroys a profile handle.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[out] profile The handle to the profile
+ * @param[out] profile The handle to the profile
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
* @see connection_profile_create()
*/
int connection_profile_destroy(connection_profile_h profile);
* @brief Clones a profile handle.
* @since_tizen 2.3
* @remarks You must release @a cloned_profile using connection_profile_destroy().
- * @param[out] cloned_profile The handle of the cloned profile
- * @param[in] origin_profile The handle of the origin profile
+ * @param[out] cloned_profile The handle of the cloned profile
+ * @param[in] origin_profile The handle of the origin profile
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
* @see connection_profile_destroy()
*/
-int connection_profile_clone(connection_profile_h* cloned_profile, connection_profile_h origin_profile);
+int connection_profile_clone(connection_profile_h *cloned_profile,
+ connection_profile_h origin_profile);
/**
* @brief Gets the profile ID.
* @details The separate profiles can have the same name.
- * So, you must use this API instead of connection_profile_get_name() if you want to get the unique identification.
+ * So, you must use this function instead of connection_profile_get_name()
+ * if you want to get the unique identification.
* In case you create a profile, this value will be determined when you add the profile.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a profile_id using free().
- * @param[in] profile The profile handle
- * @param[out] profile_id The ID of the profile
+ * @param[in] profile The profile handle
+ * @param[out] profile_id The ID of the profile
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
* @see connection_profile_get_name()
* @see connection_add_profile()
*/
-int connection_profile_get_id(connection_profile_h profile, char** profile_id);
+int connection_profile_get_id(connection_profile_h profile, char **profile_id);
/**
* @brief Gets the profile name.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a profile_name using free().
- * @param[in] profile The profile handle
- * @param[out] profile_name The name of the profile
+ * @param[in] profile The profile handle
+ * @param[out] profile_name The name of the profile
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
* @see connection_profile_get_id()
*/
-int connection_profile_get_name(connection_profile_h profile, char** profile_name);
+int connection_profile_get_name(connection_profile_h profile, char **profile_name);
/**
* @brief Gets the network type.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] type The type of the profile
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the profile
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_profile_get_type(connection_profile_h profile, connection_profile_type_e* type);
+int connection_profile_get_type(connection_profile_h profile, connection_profile_type_e *type);
/**
* @brief Gets the name of the network interface, e.g. eth0 and pdp0.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a interface_name using free().
- * @param[in] profile The profile handle
- * @param[out] interface_name The name of the network interface
+ * @param[in] profile The profile handle
+ * @param[out] interface_name The name of the network interface
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
*/
-int connection_profile_get_network_interface_name(connection_profile_h profile, char** interface_name);
+int connection_profile_get_network_interface_name(connection_profile_h profile,
+ char **interface_name);
/**
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @privlevel public
* @privilege %http://tizen.org/privilege/network.get
- * @remarks You should call this function in order to get the current information because the profile information can be changed.
- * @param[in] profile The profile handle
+ * @remarks You should call this function in order to get the current information
+ * because the profile information can be changed.
+ * @param[in] profile The profile handle
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
*/
int connection_profile_refresh(connection_profile_h profile);
/**
- * @brief Gets the network type.
+ * @brief Gets the network state.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] state The state of the profile
+ * @param[in] profile The profile handle
+ * @param[out] state The state of the profile
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_profile_get_state(connection_profile_h profile, connection_profile_state_e* state);
+int connection_profile_get_state(connection_profile_h profile,
+ connection_profile_state_e *state);
/**
* @brief Gets the IP config type.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[out] type The type of the IP config
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] type The type of the IP config
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_profile_get_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e* type);
+int connection_profile_get_ip_config_type(connection_profile_h profile,
+ connection_address_family_e address_family, connection_ip_config_type_e *type);
/**
* @brief Gets the IP address.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a ip_address using free().
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[out] ip_address The IP address
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] ip_address The IP address
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_profile_get_ip_address(connection_profile_h profile, connection_address_family_e address_family, char** ip_address);
+int connection_profile_get_ip_address(connection_profile_h profile,
+ connection_address_family_e address_family, char **ip_address);
/**
* @brief Gets the Subnet Mask.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a subnet_mask using free().
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[out] subnet_mask The subnet mask
+ * This function is supported only for IPv4 address family.
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] subnet_mask The subnet mask
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_profile_get_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, char** subnet_mask);
+int connection_profile_get_subnet_mask(connection_profile_h profile,
+ connection_address_family_e address_family, char **subnet_mask);
/**
* @brief Gets the Gateway address.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a gateway_address using free().
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[out] gateway_address The gateway address
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] gateway_address The gateway address
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_gateway_address(connection_profile_h profile, connection_address_family_e address_family, char** gateway_address);
-
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_gateway_address(connection_profile_h profile,
+ connection_address_family_e address_family, char **gateway_address);
+
+/**
+ * @brief Gets the DHCP Server address.
+ * @since_tizen 4.0
+ * @remarks You must release @a dhcp_server using free().
+ * This function is supported only for IPv4 address family.
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] dhcp_server The DHCP Server address
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_dhcp_server_address(connection_profile_h profile,
+ connection_address_family_e address_family, char **dhcp_server);
+
+/**
+ * @brief Gets the DHCP lease duration.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] dhcp_lease_duration The DHCP lease duration in seconds
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_dhcp_lease_duration(connection_profile_h profile,
+ connection_address_family_e address_family, int *dhcp_lease_duration);
/**
* @brief Gets the DNS address.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks The allowance of the DNS address is @c 2. You must release @a dns_address using free().
- * @param[in] profile The profile handle
- * @param[in] order The order of DNS address \n
- * it starts from 1, which means first DNS address
- * @param[in] address_family The address family
- * @param[out] dns_address The DNS address
+ * @param[in] profile The profile handle
+ * @param[in] order The order of DNS address \n
+ * It starts from 1, which means first DNS address
+ * @param[in] address_family The address family
+ * @param[out] dns_address The DNS address
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_profile_get_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, char** dns_address);
+int connection_profile_get_dns_address(connection_profile_h profile,
+ int order, connection_address_family_e address_family, char **dns_address);
/**
* @brief Gets the Proxy type.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] type The type of the proxy
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the proxy
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_profile_get_proxy_type(connection_profile_h profile, connection_proxy_type_e* type);
+int connection_profile_get_proxy_type(connection_profile_h profile,
+ connection_proxy_type_e *type);
/**
* @brief Gets the Proxy address.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a proxy_address using free().
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[out] proxy_address The proxy address
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] proxy_address The proxy address
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_profile_get_proxy_address(connection_profile_h profile, connection_address_family_e address_family, char** proxy_address);
+int connection_profile_get_proxy_address(connection_profile_h profile,
+ connection_address_family_e address_family, char **proxy_address);
/**
* @details If you set IP config type to #CONNECTION_IP_CONFIG_TYPE_STATIC,
* then IP address, Gateway and Subnet mask will be set to the initial value "0.0.0.0".
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[in] type The type of the IP config
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] type The type of the IP config
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
*/
-int connection_profile_set_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e type);
+int connection_profile_set_ip_config_type(connection_profile_h profile,
+ connection_address_family_e address_family, connection_ip_config_type_e type);
/**
* @brief Sets the IP address.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[in] ip_address The IP address. \n
- * If you set this value to @c NULL, then the existing value will be deleted
+ * @remarks You must release @a ip_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] ip_address The IP address \n
+ * If you set this value to @c NULL, then the existing value will be deleted
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
* @see connection_update_profile()
*/
-int connection_profile_set_ip_address(connection_profile_h profile, connection_address_family_e address_family, const char* ip_address);
+int connection_profile_set_ip_address(connection_profile_h profile,
+ connection_address_family_e address_family, const char *ip_address);
/**
* @brief Sets the Subnet Mask.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[in] subnet_mask The subnet mask. \n
- * If you set this value to @c NULL, then the existing value will be deleted
+ * @remarks You must release @a subnet_mask using free().
+ * This function is supported only for IPv4 address family.
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] subnet_mask The subnet mask \n
+ * If you set this value to @c NULL, then the existing value will be deleted
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
* @see connection_update_profile()
*/
-int connection_profile_set_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, const char* subnet_mask);
+int connection_profile_set_subnet_mask(connection_profile_h profile,
+ connection_address_family_e address_family, const char *subnet_mask);
/**
* @brief Sets the Gateway address.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[in] gateway_address The gateway address. \n
- * If you set this value to @c NULL, then the existing value will be deleted
+ * @remarks You must release @a gateway_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] gateway_address The gateway address \n
+ * If you set this value to @c NULL, then the existing value will be deleted
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
* @see connection_update_profile()
*/
-int connection_profile_set_gateway_address(connection_profile_h profile, connection_address_family_e address_family, const char* gateway_address);
+int connection_profile_set_gateway_address(connection_profile_h profile,
+ connection_address_family_e address_family, const char *gateway_address);
/**
* @brief Sets the DNS address.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks The allowance of the DNS address is @c 2.
- * @param[in] profile The profile handle
- * @param[in] order The order of the DNS address. \n
- * It starts from @c 1, which means first DNS address
- * @param[in] address_family The address family
- * @param[in] dns_address The DNS address; if you set this value to NULL, then the existing value will be deleted
+ * @remarks You must release @a dns_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] order The order of the DNS address \n
+ * It starts from @c 1, which means first DNS address
+ * @param[in] address_family The address family
+ * @param[in] dns_address The DNS address \n
+ * If you set this value to NULL then the existing value will be deleted
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
* @see connection_update_profile()
*/
-int connection_profile_set_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, const char* dns_address);
+int connection_profile_set_dns_address(connection_profile_h profile,
+ int order, connection_address_family_e address_family, const char *dns_address);
/**
* @brief Sets the Proxy type.
- * @details If you set the Proxy type to #CONNECTION_PROXY_TYPE_AUTO or #CONNECTION_PROXY_TYPE_MANUAL, then Proxy will be restored.
+ * @details If you set the Proxy type to #CONNECTION_PROXY_TYPE_AUTO or
+ * #CONNECTION_PROXY_TYPE_MANUAL, then Proxy will be restored.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] type The type of the proxy
+ * @param[in] profile The profile handle
+ * @param[in] type The type of the proxy
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
* @see connection_update_profile()
*/
-int connection_profile_set_proxy_type(connection_profile_h profile, connection_proxy_type_e type);
+int connection_profile_set_proxy_type(connection_profile_h profile,
+ connection_proxy_type_e type);
/**
* @brief Sets the Proxy address.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[in] proxy_address The proxy address. \n
- * If you set this value to @c NULL, then the existing value will be deleted
+ * @remarks You must release @a proxy_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] proxy_address The proxy address \n
+ * If you set this value to @c NULL, then the existing value will be deleted
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
* @see connection_update_profile()
*/
-int connection_profile_set_proxy_address(connection_profile_h profile, connection_address_family_e address_family, const char* proxy_address);
+int connection_profile_set_proxy_address(connection_profile_h profile,
+ connection_address_family_e address_family, const char *proxy_address);
/**
* @brief Called when the state of the profile is changed.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] state The state
- * @param[in] user_data The user data passed from the callback registration function
+ * @param[in] state The state
+ * @param[in] user_data The user data passed from the callback registration function
* @see connection_profile_set_state_changed_cb()
* @see connection_profile_unset_state_changed_cb()
*/
-typedef void(*connection_profile_state_changed_cb)(connection_profile_state_e state, void* user_data);
+typedef void(*connection_profile_state_changed_cb)(connection_profile_state_e state,
+ void *user_data);
/**
- * @brief Registers the callback that is called when the state of profile is changed.
+ * @brief Sets the callback that is called when the state of profile is changed.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] callback The callback function to be called
- * @param[in] user_data The user data passed to the callback function
+ * @param[in] profile The profile handle
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
* @post connection_opened_cb() is invoked when the state of profile is changed.
* @see connection_profile_state_changed_cb()
* @see connection_profile_unset_state_changed_cb()
*/
-int connection_profile_set_state_changed_cb(connection_profile_h profile, connection_profile_state_changed_cb callback, void* user_data);
+int connection_profile_set_state_changed_cb(connection_profile_h profile,
+ connection_profile_state_changed_cb callback, void *user_data);
/**
- * @brief Unregisters the callback that is called when the state of profile is changed.
+ * @brief Unsets the callback that is called when the state of profile is changed.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
+ * @param[in] profile The profile handle
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
* @see connection_profile_state_changed_cb()
* @see connection_profile_set_state_changed_cb()
*/
int connection_profile_unset_state_changed_cb(connection_profile_h profile);
+/**
+ * @brief Gets the IPv6 network state.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[out] state The profile state
+ * @return 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ */
+int connection_profile_get_ipv6_state(connection_profile_h profile,
+ connection_profile_state_e *state);
+
+/**
+ * @brief Sets the DNS config type.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] type The DNS config type
+ * @return 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ */
+int connection_profile_set_dns_config_type(connection_profile_h profile,
+ connection_address_family_e address_family, connection_dns_config_type_e type);
+
+/**
+ * @brief Gets the DNS config type.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] type The DNS config type
+ * @return 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ */
+int connection_profile_get_dns_config_type(connection_profile_h profile,
+ connection_address_family_e address_family, connection_dns_config_type_e *type);
+
+/**
+ * @brief Gets the network prefix length.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] prefix_len The network prefix length \n
+ * In case of IPv4, it means netmask length
+ * (also called a prefix, e.g. 8, 16, 24, 32)
+ * @return 0 on success, otherwise negative error value.
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ */
+int connection_profile_get_prefix_length(connection_profile_h profile,
+ connection_address_family_e address_family, int *prefix_len);
+
+/**
+ * @brief Sets the network prefix length.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] prefix_len The network prefix length
+ * In case of IPv4, it means netmask length
+ * (also called a prefix, e.g. 8, 16, 24, 32)
+ * @return 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+ */
+int connection_profile_set_prefix_length(connection_profile_h profile,
+ connection_address_family_e address_family, int prefix_len);
/**
* @}
* @brief Gets the ESSID (Extended Service Set Identifier).
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a essid using free().
- * @param[in] profile The profile handle
- * @param[out] essid The ESSID
+ * @param[in] profile The profile handle
+ * @param[out] essid The ESSID
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_essid(connection_profile_h profile, char** essid);
+int connection_profile_get_wifi_essid(connection_profile_h profile, char **essid);
/**
* @brief Gets the BSSID (Basic Service Set Identifier).
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a bssid using free().
- * @param[in] profile The profile handle
- * @param[out] bssid The BSSID
+ * @param[in] profile The profile handle
+ * @param[out] bssid The BSSID
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_bssid(connection_profile_h profile, char** bssid);
+int connection_profile_get_wifi_bssid(connection_profile_h profile, char **bssid);
/**
* @brief Gets the RSSI.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] rssi The RSSI
+ * @param[in] profile The profile handle
+ * @param[out] rssi The RSSI
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_rssi(connection_profile_h profile, int* rssi);
+int connection_profile_get_wifi_rssi(connection_profile_h profile, int *rssi);
/**
* @brief Gets the frequency (MHz).
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] frequency The frequency
+ * @param[in] profile The profile handle
+ * @param[out] frequency The frequency
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_frequency(connection_profile_h profile, int* frequency);
+int connection_profile_get_wifi_frequency(connection_profile_h profile, int *frequency);
/**
* @brief Gets the max speed (Mbps).
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] max_speed The max speed
+ * @param[in] profile The profile handle
+ * @param[out] max_speed The max speed
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_max_speed(connection_profile_h profile, int* max_speed);
+int connection_profile_get_wifi_max_speed(connection_profile_h profile, int *max_speed);
/**
- * @brief Gets the security mode of Wi-Fi.
+ * @brief Gets the security type of Wi-Fi.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] type The type of Wi-Fi security
+ * @param[in] profile The profile handle
+ * @param[out] type The type of Wi-Fi security
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_security_type(connection_profile_h profile, connection_wifi_security_type_e* type);
+int connection_profile_get_wifi_security_type(connection_profile_h profile,
+ connection_wifi_security_type_e *type);
/**
- * @brief Gets the security mode of Wi-Fi.
+ * @brief Gets the encryption type of Wi-Fi.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] type The type of Wi-Fi security
+ * @param[in] profile The profile handle
+ * @param[out] type The type of Wi-Fi security
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_encryption_type(connection_profile_h profile, connection_wifi_encryption_type_e* type);
+int connection_profile_get_wifi_encryption_type(connection_profile_h profile,
+ connection_wifi_encryption_type_e *type);
/**
* @brief Checks whether passphrase is required.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks This function is not valid if security type is #CONNECTION_WIFI_SECURITY_TYPE_EAP.
- * @param[in] profile The profile handle
- * @param[out] required @c true if a passphrase is required,
- * otherwise @c false if a passphrase is not required
+ * @param[in] profile The profile handle
+ * @param[out] required @c true if a passphrase is required,
+ * otherwise @c false if a passphrase is not required
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_is_wifi_passphrase_required(connection_profile_h profile, bool* required);
+int connection_profile_is_wifi_passphrase_required(connection_profile_h profile,
+ bool *required);
/**
* @brief Sets the passphrase of the Wi-Fi WPA.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] passphrase The passphrase of Wi-Fi security
+ * @remarks You must release @a passphrase using free().
+ * @param[in] profile The profile handle
+ * @param[in] passphrase The passphrase of Wi-Fi security
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
* @see connection_update_profile()
*/
-int connection_profile_set_wifi_passphrase(connection_profile_h profile, const char* passphrase);
+int connection_profile_set_wifi_passphrase(connection_profile_h profile,
+ const char *passphrase);
/**
* @brief Checks whether the WPS (Wi-Fi Protected Setup) is supported.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks If WPS is supported, you can connect the access point with WPS by wifi_connect_with_wps().
- * @param[in] profile The profile handle
- * @param[out] supported @c true if WPS is supported,
- * otherwise @c false if WPS is not supported
+ * @param[in] profile The profile handle
+ * @param[out] supported @c true if WPS is supported,
+ * otherwise @c false if WPS is not supported
* @return @c 0 on success,
* otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_is_wifi_wps_supported(connection_profile_h profile, bool* supported);
+int connection_profile_is_wifi_wps_supported(connection_profile_h profile,
+ bool *supported);
/**
/**
* @brief Gets the service type.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] type The type of the cellular service
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the cellular service
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e* type);
+int connection_profile_get_cellular_service_type(connection_profile_h profile,
+ connection_cellular_service_type_e *type);
/**
* @brief Gets the APN (access point name).
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a apn using free().
- * @param[in] profile The profile handle
- * @param[out] apn The name of the APN
+ * @param[in] profile The profile handle
+ * @param[out] apn The name of the APN
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_cellular_apn(connection_profile_h profile, char** apn);
+int connection_profile_get_cellular_apn(connection_profile_h profile, char **apn);
/**
* @brief Gets the authentication information.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a user_name and @a password using free().
- * @param[in] profile The profile handle
- * @param[out] type The type of the authentication
- * @param[out] user_name The user name
- * @param[out] password The password
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the authentication
+ * @param[out] user_name The user name
+ * @param[out] password The password
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e* type, char** user_name, char** password);
+int connection_profile_get_cellular_auth_info(connection_profile_h profile,
+ connection_cellular_auth_type_e *type, char **user_name, char **password);
/**
* @brief Gets the home URL.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
* @remarks You must release @a home_url using free().
- * @param[in] profile The profile handle
- * @param[out] home_url The home URL
+ * @param[in] profile The profile handle
+ * @param[out] home_url The home URL
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_cellular_home_url(connection_profile_h profile, char** home_url);
+int connection_profile_get_cellular_home_url(connection_profile_h profile,
+ char **home_url);
/**
* @brief Gets the cellular pdn type.
* @since_tizen 3.0
- * @param[in] profile The profile handle
- * @param[out] type The cellular pdn type
+ * @param[in] profile The profile handle
+ * @param[out] type The cellular pdn type
* @return @c 0 on success,
* otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_cellular_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e* type);
+int connection_profile_get_cellular_pdn_type(connection_profile_h profile,
+ connection_cellular_pdn_type_e *type);
/**
* @brief Gets the cellular roam pdn type.
* @since_tizen 3.0
- * @param[in] profile The profile handle
- * @param[out] type The cellular pdn type
+ * @param[in] profile The profile handle
+ * @param[out] type The cellular pdn type
* @return @c 0 on success,
* otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_cellular_roam_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e* type);
+int connection_profile_get_cellular_roam_pdn_type(connection_profile_h profile,
+ connection_cellular_pdn_type_e *type);
/**
- * @brief Checks wheter the connection is in roaming state.
+ * @brief Checks whether the connection is in roaming state.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] is_roaming @c true if the cellular is roaming,
- * otherwise @c false if it is not roaming
+ * @param[in] profile The profile handle
+ * @param[out] is_roaming @c true if the cellular is roaming,
+ * otherwise @c false if it is not roaming
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_is_cellular_roaming(connection_profile_h profile, bool* is_roaming);
+int connection_profile_is_cellular_roaming(connection_profile_h profile,
+ bool *is_roaming);
/**
* @brief Checks whether the profile is hidden.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] is_hidden @c true if the profile is in hidden,
- * otherwise @c false if the profile is not hidden
+ * @param[in] profile The profile handle
+ * @param[out] is_hidden @c true if the profile is in hidden,
+ * otherwise @c false if the profile is not hidden
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_is_cellular_hidden(connection_profile_h profile, bool* is_hidden);
+int connection_profile_is_cellular_hidden(connection_profile_h profile,
+ bool *is_hidden);
/**
* @brief Checks whether the profile is editable.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] is_editable @c true if the profile is editable,
- * otherwise @c false if the profile is not editable
+ * @param[in] profile The profile handle
+ * @param[out] is_editable @c true if the profile is editable,
+ * otherwise @c false if the profile is not editable
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_is_cellular_editable(connection_profile_h profile, bool* is_editable);
+int connection_profile_is_cellular_editable(connection_profile_h profile,
+ bool *is_editable);
/**
* @brief Checks whether the profile is default.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] is_default @c true if the profile is default,
- * otherwise @c false if the profile is not default
+ * @param[in] profile The profile handle
+ * @param[out] is_default @c true if the profile is default,
+ * otherwise @c false if the profile is not default
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_is_cellular_default(connection_profile_h profile, bool* is_default);
+int connection_profile_is_cellular_default(connection_profile_h profile,
+ bool *is_default);
/**
* @brief Sets the service type.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] service_type The type of cellular service
+ * @param[in] profile The profile handle
+ * @param[in] service_type The type of cellular service
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
* @see connection_update_profile()
*/
-int connection_profile_set_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e service_type);
+int connection_profile_set_cellular_service_type(connection_profile_h profile,
+ connection_cellular_service_type_e service_type);
/**
* @brief Sets the APN (Access Point Name).
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] apn The name of APN
+ * @remarks You must release @a apn using free().
+ * @param[in] profile The profile handle
+ * @param[in] apn The name of APN
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
* @see connection_update_profile()
*/
-int connection_profile_set_cellular_apn(connection_profile_h profile, const char* apn);
+int connection_profile_set_cellular_apn(connection_profile_h profile, const char *apn);
/**
* @brief Sets the Authentication information.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] type The type of the authentication
- * @param[in] user_name The user name
- * @param[in] password The password
+ * @remarks You must release @a user_name using free().
+ * @param[in] profile The profile handle
+ * @param[in] type The type of the authentication
+ * @param[in] user_name The user name
+ * @param[in] password The password
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
* @see connection_update_profile()
*/
-int connection_profile_set_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e type, const char* user_name, const char* password);
+int connection_profile_set_cellular_auth_info(connection_profile_h profile,
+ connection_cellular_auth_type_e type, const char *user_name, const char *password);
/**
* @brief Sets the home URL.
* @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] home_url The home URL
+ * @remarks You must release @a home_url using free().
+ * @param[in] profile The profile handle
+ * @param[in] home_url The home URL
* @return @c 0 on success,
* otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
* @see connection_update_profile()
*/
-int connection_profile_set_cellular_home_url(connection_profile_h profile, const char* home_url);
+int connection_profile_set_cellular_home_url(connection_profile_h profile,
+ const char *home_url);
/**
* @brief Sets the cellular pdn type.
* @since_tizen 3.0
- * @param[in] profile The profile handle
- * @param[in] type The cellular pdn type
+ * @param[in] profile The profile handle
+ * @param[in] type The cellular pdn type
* @return @c 0 on success,
* otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_set_cellular_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e type);
+int connection_profile_set_cellular_pdn_type(connection_profile_h profile,
+ connection_cellular_pdn_type_e type);
/**
* @brief Sets the cellular roam pdn type.
* @since_tizen 3.0
- * @param[in] profile The profile handle
- * @param[in] type The cellular pdn type
+ * @param[in] profile The profile handle
+ * @param[in] type The cellular pdn type
* @return @c 0 on success,
* otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
-*/
-int connection_profile_set_cellular_roam_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e type);
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_NOT_INITIALIZED Not initialized
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_set_cellular_roam_pdn_type(connection_profile_h profile,
+ connection_cellular_pdn_type_e type);
/**