#endif
/* Cache options */
-#define CONFIG_CMD_CACHE
#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_SYS_L2CACHE_OFF
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-/* DCC driver */
-#if defined(CONFIG_ZYNQ_DCC)
-# define CONFIG_ARM_DCC
-#else
-# define CONFIG_ZYNQ_SERIAL
-#endif
-
-#define CONFIG_ZYNQ_GPIO
+#define CONFIG_ARM_DCC
+#define CONFIG_ZYNQ_SERIAL
/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM)
# define CONFIG_MII
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define CONFIG_PHY_MARVELL
+# define CONFIG_PHY_REALTEK
+# define CONFIG_PHY_XILINX
# define CONFIG_BOOTP_SERVERIP
# define CONFIG_BOOTP_BOOTPATH
# define CONFIG_BOOTP_GATEWAY
/* SPI */
#ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_CMD_SF
#endif
/* QSPI */
#ifdef CONFIG_ZYNQ_QSPI
# define CONFIG_SF_DEFAULT_SPEED 30000000
# define CONFIG_SPI_FLASH_ISSI
-# define CONFIG_CMD_SF
#endif
/* NOR */
#endif
/* MMC */
-#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+#if defined(CONFIG_ZYNQ_SDHCI)
# define CONFIG_MMC
# define CONFIG_GENERIC_MMC
# define CONFIG_SDHCI
-# define CONFIG_ZYNQ_SDHCI
-# define CONFIG_CMD_MMC
# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000
#endif
#ifdef CONFIG_ZYNQ_USB
# define CONFIG_USB_EHCI
-# define CONFIG_CMD_USB
# define CONFIG_USB_STORAGE
# define CONFIG_USB_EHCI_ZYNQ
-# define CONFIG_USB_ULPI_VIEWPORT
-# define CONFIG_USB_ULPI
# define CONFIG_EHCI_IS_TDI
# define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-# define CONFIG_CI_UDC /* ChipIdea CI13xxx UDC */
-# define CONFIG_USB_GADGET
-# define CONFIG_USB_GADGET_DUALSPEED
-# define CONFIG_USB_GADGET_DOWNLOAD
# define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000
# define DFU_DEFAULT_POLL_TIMEOUT 300
# define CONFIG_USB_FUNCTION_DFU
# define CONFIG_DFU_RAM
-# define CONFIG_USB_GADGET_VBUS_DRAW 2
-# define CONFIG_G_DNL_VENDOR_NUM 0x03FD
-# define CONFIG_G_DNL_PRODUCT_NUM 0x0300
-# define CONFIG_G_DNL_MANUFACTURER "Xilinx"
-# define CONFIG_USB_GADGET
# define CONFIG_USB_CABLE_CHECK
-# define CONFIG_CMD_DFU
# define CONFIG_CMD_THOR_DOWNLOAD
+# define CONFIG_THOR_RESET_OFF
# define CONFIG_USB_FUNCTION_THOR
# define DFU_ALT_INFO_RAM \
"dfu_ram_info=" \
"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
-# if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+# if defined(CONFIG_ZYNQ_SDHCI)
# define CONFIG_DFU_MMC
# define DFU_ALT_INFO_MMC \
"dfu_mmc_info=" \
#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
# define CONFIG_SUPPORT_VFAT
-# define CONFIG_CMD_FAT
-# define CONFIG_CMD_EXT2
# define CONFIG_FAT_WRITE
# define CONFIG_DOS_PARTITION
-# define CONFIG_CMD_EXT4
-# define CONFIG_CMD_EXT4_WRITE
-# define CONFIG_CMD_FS_GENERIC
#endif
#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
/* I2C */
#if defined(CONFIG_SYS_I2C_ZYNQ)
-# define CONFIG_CMD_I2C
# define CONFIG_SYS_I2C
# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
# define CONFIG_ENV_OFFSET 0xE0000
#endif
+/* enable preboot to be loaded before CONFIG_BOOTDELAY */
+#define CONFIG_PREBOOT
+
/* Default environment */
+#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"fit_image=fit.itb\0" \
"load_addr=0x2000000\0" \
"nor_flash_off=0xE2100000\0" \
"fdt_high=0x20000000\0" \
"initrd_high=0x20000000\0" \
+ "loadbootenv_addr=0x2000000\0" \
+ "bootenv=uEnv.txt\0" \
+ "bootenv_dev=mmc\0" \
+ "loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \
+ "importbootenv=echo Importing environment from ${bootenv_dev} ...; " \
+ "env import -t ${loadbootenv_addr} $filesize\0" \
+ "bootenv_existence_test=test -e ${bootenv_dev} 0 /${bootenv}\0" \
+ "setbootenv=if env run bootenv_existence_test; then " \
+ "if env run loadbootenv; then " \
+ "env run importbootenv; " \
+ "fi; " \
+ "fi; \0" \
+ "sd_loadbootenv=set bootenv_dev mmc && " \
+ "run setbootenv \0" \
+ "usb_loadbootenv=set bootenv_dev usb && usb start && run setbootenv \0" \
+ "preboot=if test $modeboot = sdboot; then " \
+ "run sd_loadbootenv; " \
+ "echo Checking if uenvcmd is set ...; " \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...; " \
+ "run uenvcmd; " \
+ "fi; " \
+ "fi; \0" \
"norboot=echo Copying FIT from NOR flash to RAM... && " \
"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
"bootm ${load_addr}\0" \
"usbboot=if usb start; then " \
"echo Copying FIT from USB to RAM... && " \
"load usb 0 ${load_addr} ${fit_image} && " \
- "bootm ${load_addr}\0" \
- "fi\0" \
+ "bootm ${load_addr}; fi\0" \
DFU_ALT_INFO
+#endif
#define CONFIG_BOOTCOMMAND "run $modeboot"
-#define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */
#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
/* Miscellaneous configurable options */
-#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
/* Physical Memory map */
#define CONFIG_SYS_TEXT_BASE 0x4000000
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE 0
+#ifndef CONFIG_NR_DRAM_BANKS
+# define CONFIG_NR_DRAM_BANKS 1
+#endif
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
+#define CONFIG_SYS_MEMTEST_START 0
+#define CONFIG_SYS_MEMTEST_END 0x1000
#define CONFIG_SYS_MALLOC_LEN 0x1400000
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_CMD_FPGA_LOADBP
#define CONFIG_CMD_FPGA_LOADFS
-/* Open Firmware flat tree */
-#define CONFIG_OF_LIBFDT
-
/* FIT support */
#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
/* Boot FreeBSD/vxWorks from an ELF image */
-#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
-# define CONFIG_SYS_MMC_MAX_DEVICE 1
-#endif
+#define CONFIG_SYS_MMC_MAX_DEVICE 1
#define CONFIG_SYS_LDSCRIPT "arch/arm/mach-zynq/u-boot.lds"
/* Commands */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_TFTPPUT
/* SPL part */
#define CONFIG_CMD_SPL
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-zynq/u-boot-spl.lds"
/* MMC support */
-#ifdef CONFIG_ZYNQ_SDHCI0
+#ifdef CONFIG_ZYNQ_SDHCI
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
-#ifdef CONFIG_OF_SEPARATE
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
-#else
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
/* Disable dcache for SPL just for sure */
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
-
#endif /* __CONFIG_ZYNQ_COMMON_H */