disk: convert CONFIG_DOS_PARTITION to Kconfig

[platform/kernel/u-boot.git] / include / configs / zynq-common.h

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 5f7fefd..3b0aca2 100644 (file)
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -43,7 +43,6 @@
 # define CONFIG_PHY_MARVELL
 # define CONFIG_PHY_REALTEK
 # define CONFIG_PHY_XILINX
-# define CONFIG_BOOTP_SERVERIP
 # define CONFIG_BOOTP_BOOTPATH
 # define CONFIG_BOOTP_GATEWAY
 # define CONFIG_BOOTP_HOSTNAME
@@ -76,22 +75,24 @@
 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #endif
 
+#ifdef CONFIG_NAND_ZYNQ
+#define CONFIG_CMD_NAND_LOCK_UNLOCK
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_MTD_DEVICE
+#endif
+
 /* MMC */
 #if defined(CONFIG_ZYNQ_SDHCI)
-# define CONFIG_MMC
 # define CONFIG_GENERIC_MMC
-# define CONFIG_SDHCI
 # define CONFIG_ZYNQ_SDHCI_MAX_FREQ    52000000
 #endif
 
 #ifdef CONFIG_USB_EHCI_ZYNQ
 # define CONFIG_EHCI_IS_TDI
-# define CONFIG_USB_MAX_CONTROLLER_COUNT       2
 
 # define CONFIG_SYS_DFU_DATA_BUF_SIZE  0x600000
 # define DFU_DEFAULT_POLL_TIMEOUT      300
-# define CONFIG_USB_FUNCTION_DFU
-# define CONFIG_DFU_RAM
 # define CONFIG_USB_CABLE_CHECK
 # define CONFIG_CMD_THOR_DOWNLOAD
 # define CONFIG_THOR_RESET_OFF
@@ -106,7 +107,6 @@
        "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 
 # if defined(CONFIG_ZYNQ_SDHCI)
-#  define CONFIG_DFU_MMC
 #  define DFU_ALT_INFO_MMC \
        "dfu_mmc_info=" \
        "set dfu_alt_info " \
@@ -132,7 +132,6 @@
 #if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
 # define CONFIG_SUPPORT_VFAT
 # define CONFIG_FAT_WRITE
-# define CONFIG_DOS_PARTITION
 #endif
 
 #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
@@ -237,8 +236,6 @@
 
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CLOCKS
 #define CONFIG_CMD_CLK
@@ -247,9 +244,6 @@
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
                                        sizeof(CONFIG_SYS_PROMPT) + 16)
 
-/* Physical Memory map */
-#define CONFIG_SYS_TEXT_BASE           0x4000000
-
 #ifndef CONFIG_NR_DRAM_BANKS
 # define CONFIG_NR_DRAM_BANKS          1
 #endif
@@ -293,22 +287,13 @@
 /* SPL part */
 #define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_RAM_DEVICE
 
 #define CONFIG_SPL_LDSCRIPT    "arch/arm/mach-zynq/u-boot-spl.lds"
 
 /* MMC support */
 #ifdef CONFIG_ZYNQ_SDHCI
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
 #endif
 
@@ -331,9 +316,7 @@
 
 /* qspi mode is working fine */
 #ifdef CONFIG_ZYNQ_QSPI
-#define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x100000
 #define CONFIG_SYS_SPI_ARGS_OFFS       0x200000
 #define CONFIG_SYS_SPI_ARGS_SIZE       0x80000
@@ -342,7 +325,6 @@
 #endif
 
 /* for booting directly linux */
-#define CONFIG_SPL_OS_BOOT
 
 /* SP location before relocation, must use scratch RAM */
 #define CONFIG_SPL_TEXT_BASE   0x0