drivers, block: remove sil680 driver

[platform/kernel/u-boot.git] / include / configs / xpedite1000.h

diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h
index ea27050..93afb20 100644 (file)
--- a/include/configs/xpedite1000.h
+++ b/include/configs/xpedite1000.h
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -18,10 +18,8 @@
 #define CONFIG_XPEDITE1000     1
 #define CONFIG_SYS_BOARD_NAME  "XPedite1000"
 #define CONFIG_SYS_FORM_PMC    1
-#define CONFIG_4xx             1               /* ... PPC4xx family */
 #define CONFIG_440             1
 #define CONFIG_440GX           1               /* 440 GX */
-#define CONFIG_BOARD_EARLY_INIT_F 1            /* Call board_pre_init  */
 #define CONFIG_SYS_CLK_FREQ    33333333        /* external freq to pll */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF80000
@@ -97,23 +95,16 @@ extern void out32(unsigned int, unsigned long);
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1       /* Use UART0                    */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 
 #define CONFIG_SYS_BAUDRATE_TABLE \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_LOADS_ECHO              1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
 /*
- * Use the HUSH parser
- */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
  * NOR flash configuration
  */
 #define CONFIG_SYS_MAX_FLASH_BANKS     3
@@ -150,9 +141,7 @@ extern void out32(unsigned int, unsigned long);
  * PCI
  */
 /* General PCI */
-#define CONFIG_PCI                             /* include pci support */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
-#define CONFIG_PCI_PNP                         /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW                   /* show pci devices on startup */
 #define CONFIG_SYS_PCI_TARGBASE        0x80000000      /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 
@@ -186,41 +175,20 @@ extern void out32(unsigned int, unsigned long);
 /*
  * Command configuration
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_SNTP
 
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1 ms ticks */
 #define CONFIG_CMDLINE_EDITING 1               /* Command-line editing */
-#define CONFIG_BOOTDELAY       3               /* -1 disables auto-boot */
 #define CONFIG_PANIC_HANG                      /* do not reset board on panic */
 #define CONFIG_PREBOOT                         /* enable preboot variable */
-#define CONFIG_FIT             1
-#define CONFIG_FIT_VERBOSE     1
 #define CONFIG_INTEGRITY                       /* support booting INTEGRITY OS */
 #define CONFIG_SYS_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 
@@ -327,7 +295,7 @@ extern void out32(unsigned int, unsigned long);
        "osfile=/home/user/board.uImage\0"                              \
        "fdtfile=/home/user/board.dtb\0"                                \
        "ubootfile=/home/user/u-boot.bin\0"                             \
-       "fdtaddr=c00000\0"                                              \
+       "fdtaddr=0x1e00000\0"                                           \
        "osaddr=0x1000000\0"                                            \
        "loadaddr=0x1000000\0"                                          \
        "prog_uboot="CONFIG_PROG_UBOOT"\0"                              \