#define GICD_BASE 0xF9010000
#define GICC_BASE 0xF9020000
-#ifndef CONFIG_SYS_MEMTEST_SCRATCH
-# define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
-#endif
-
-#define CONFIG_SYS_MEMTEST_START 0
-#define CONFIG_SYS_MEMTEST_END 1000
-
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
/* Serial setup */
-#define CONFIG_ARM_DCC
#define CONFIG_CPU_ARMV8
#define CONFIG_SYS_BAUDRATE_TABLE \
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 2048
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_PANIC_HANG
#define CONFIG_SYS_MAXARGS 64
/* Ethernet driver */
"kernel_addr_r=0x18000000\0" \
"scriptaddr=0x20000000\0" \
"ramdisk_addr_r=0x02100000\0" \
- "script_offset_f=0x3e80000\0" \
"script_size_f=0x80000\0" \
#if defined(CONFIG_MMC_SDHCI_ZYNQ)
#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
"bootcmd_" #devtypel #instance "=sf probe " #instance " 0 0 && " \
"sf read $scriptaddr $script_offset_f $script_size_f && " \
- "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+ "echo QSPI: Trying to boot script at ${scriptaddr} && " \
+ "source ${scriptaddr}; echo QSPI: SCRIPT FAILED: continuing...;\0"
#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
#devtypel #instance " "
#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
"bootcmd_" #devtypel #instance "= nand info && " \
"nand read $scriptaddr $script_offset_f $script_size_f && " \
- "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+ "echo NAND: Trying to boot script at ${scriptaddr} && " \
+ "source ${scriptaddr}; echo NAND: SCRIPT FAILED: continuing...;\0"
#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
#devtypel #instance " "
#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na)
#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
- "bootcmd_jtag=source $scriptaddr; echo SCRIPT FAILED: continuing...;\0"
+ "bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
+ "source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"
#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
"jtag "
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
+# if defined(CONFIG_SPL_LOAD_FIT)
+# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb"
+# else
+# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
+# endif
#endif
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
-# undef CONFIG_CMD_BOOTD
# define CONFIG_SPL_ENV_SUPPORT
# define CONFIG_SPL_HASH_SUPPORT
# define CONFIG_ENV_MAX_ENTRIES 10
# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
#endif
-#define CONFIG_BOARD_EARLY_INIT_F
-
#endif /* __XILINX_ZYNQMP_H */