/* Have release address at the end of 256MB for now */
#define CPU_RELEASE_ADDR 0xFFFFFF0
-/* Cache Definitions */
-#define CONFIG_SYS_CACHELINE_SIZE 64
-
-#if !defined(CONFIG_IDENT_STRING)
-# define CONFIG_IDENT_STRING " Xilinx ZynqMP"
-#endif
-
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
/* Command line configuration */
#define CONFIG_CMD_ENV
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_MP
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_MAY_FAIL
-#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_SUBNETMASK
+
+/* Diff from config_distro_defaults.h */
+#define CONFIG_SUPPORT_RAW_INITRD
+#if !defined(CONFIG_SPL_BUILD)
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#endif
+#define CONFIG_AUTO_COMPLETE
#if defined(CONFIG_ZYNQ_SDHCI)
-# define CONFIG_MMC
# define CONFIG_GENERIC_MMC
-# define CONFIG_SDHCI
+# define CONFIG_SUPPORT_EMMC_BOOT
# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000
# endif
+# define CONFIG_ENV_IS_IN_FAT
+# define FAT_ENV_DEVICE_AND_PART "0:auto"
+# define FAT_ENV_FILE "uboot.env"
+# define FAT_ENV_INTERFACE "mmc"
#endif
#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQMP_USB)
#endif
#ifdef CONFIG_NAND_ARASAN
-# define CONFIG_CMD_NAND
# define CONFIG_CMD_NAND_LOCK_UNLOCK
# define CONFIG_SYS_MAX_NAND_DEVICE 1
# define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_SYS_LOAD_ADDR 0x8000000
#if defined(CONFIG_ZYNQMP_USB)
-#define CONFIG_USB_XHCI_DWC3
-#define CONFIG_USB_XHCI
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_XHCI_ZYNQMP
#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
#define DFU_DEFAULT_POLL_TIMEOUT 300
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_RAM
#define CONFIG_USB_CABLE_CHECK
#define CONFIG_CMD_THOR_DOWNLOAD
#define CONFIG_USB_FUNCTION_THOR
#define DFU_ALT_INFO \
DFU_ALT_INFO_RAM
+
+#ifndef CONFIG_SPL_BUILD
+# define CONFIG_USB_FUNCTION_FASTBOOT
+# define CONFIG_CMD_FASTBOOT
+# define CONFIG_ANDROID_BOOT_IMAGE
+# define CONFIG_FASTBOOT_BUF_ADDR 0x100000
+# define CONFIG_FASTBOOT_BUF_SIZE 0x6000000
+# define CONFIG_FASTBOOT_FLASH
+# ifdef CONFIG_ZYNQ_SDHCI
+# define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
+# endif
+# define CONFIG_PARTITION_UUIDS
+# define CONFIG_CMD_GPT
+
+# define CONFIG_RANDOM_UUID
+# define PARTS_DEFAULT \
+ "partitions=uuid_disk=${uuid_gpt_disk};" \
+ "name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
+ "name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
+#endif
#endif
#if !defined(DFU_ALT_INFO)
# define DFU_ALT_INFO
#endif
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_addr=0x80000\0" \
- "fdt_addr=0x7000000\0" \
- "fdt_high=0x10000000\0" \
- CONFIG_KERNEL_FDT_OFST_SIZE \
- "sdbootdev=0\0"\
- "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
- "load mmc $sdbootdev:$partid $kernel_addr Image && " \
- "booti $kernel_addr - $fdt_addr\0" \
- DFU_ALT_INFO
-
-#define CONFIG_PREBOOT "run bootargs"
-#define CONFIG_BOOTCOMMAND "run $modeboot"
-#define CONFIG_BOOTDELAY 3
-
-#define CONFIG_BOARD_LATE_INIT
+#if !defined(PARTS_DEFAULT)
+# define PARTS_DEFAULT
+#endif
/* Do not preserve environment */
+#if !defined(CONFIG_ENV_IS_IN_FAT)
#define CONFIG_ENV_IS_NOWHERE 1
-#define CONFIG_ENV_SIZE 0x1000
+#endif
+#define CONFIG_ENV_SIZE 0x8000
/* Monitor Command Prompt */
/* Console I/O Buffer Size */
# define CONFIG_PHY_NATSEMI
# define CONFIG_PHY_TI
# define CONFIG_PHY_GIGE
+# define CONFIG_PHY_VITESSE
+# define CONFIG_PHY_REALTEK
# define PHY_ANEG_TIMEOUT 20000
#endif
# define CONFIG_SYS_EEPROM_SIZE (64 * 1024)
#endif
-#ifdef CONFIG_AHCI
+#ifdef CONFIG_SATA_CEVA
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
-#define CONFIG_CMD_BOOTI
#define CONFIG_CMD_UNZIP
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_CLOCKS
+#define ENV_MEM_LAYOUT_SETTINGS \
+ "fdt_high=10000000\0" \
+ "initrd_high=10000000\0" \
+ "fdt_addr_r=0x40000000\0" \
+ "pxefile_addr_r=0x10000000\0" \
+ "kernel_addr_r=0x18000000\0" \
+ "scriptaddr=0x02000000\0" \
+ "ramdisk_addr_r=0x02100000\0" \
+
+#if defined(CONFIG_ZYNQ_SDHCI)
+# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
+#else
+# define BOOT_TARGET_DEVICES_MMC(func)
+#endif
+
+#if defined(CONFIG_SATA_CEVA)
+# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
+#else
+# define BOOT_TARGET_DEVICES_SCSI(func)
+#endif
+
+#if defined(CONFIG_ZYNQMP_USB)
+# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
+#else
+# define BOOT_TARGET_DEVICES_USB(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+ BOOT_TARGET_DEVICES_MMC(func) \
+ BOOT_TARGET_DEVICES_USB(func) \
+ BOOT_TARGET_DEVICES_SCSI(func) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+/* Initial environment variables */
+#ifndef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ ENV_MEM_LAYOUT_SETTINGS \
+ BOOTENV \
+ DFU_ALT_INFO
+#endif
+
+/* SPL can't handle all huge variables - define just DFU */
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
+#undef CONFIG_EXTRA_ENV_SETTINGS
+# define CONFIG_EXTRA_ENV_SETTINGS \
+ "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
+ "atf-uboot.ub ram 0x10000000 0x1000000;" \
+ "Image ram 0x80000 0x3f80000;" \
+ "system.dtb ram 0x4000000 0x100000\0" \
+ "dfu_bufsiz=0x1000\0"
+#endif
+
+#define CONFIG_SPL_TEXT_BASE 0xfffc0000
+#define CONFIG_SPL_STACK 0xfffffffc
+#define CONFIG_SPL_MAX_SIZE 0x40000
+
+/* Just random location in OCM */
+#define CONFIG_SPL_BSS_START_ADDR 0x0
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_BOARD_INIT
+
+/* u-boot is like dtb */
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
+
+/* ATF is my kernel image */
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
+
+/* FIT load address for RAM boot */
+#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
+
+/* MMC support */
+#ifdef CONFIG_ZYNQ_SDHCI
+# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
+# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
+# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
+# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
+#endif
+
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
+# undef CONFIG_CMD_BOOTD
+# define CONFIG_SPL_ENV_SUPPORT
+# define CONFIG_SPL_HASH_SUPPORT
+# define CONFIG_ENV_MAX_ENTRIES 10
+
+# define CONFIG_SYS_SPL_MALLOC_START 0x20000000
+# define CONFIG_SYS_SPL_MALLOC_SIZE 0x10000000
+
+#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
+# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
+#endif
+#endif
+
#endif /* __XILINX_ZYNQMP_H */
projects / platform / kernel / u-boot.git / blobdiff