Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig

[platform/kernel/u-boot.git] / include / configs / warp.h

diff --git a/include/configs/warp.h b/include/configs/warp.h
index 2eb429e..865f2ac 100644 (file)
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -13,90 +13,33 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/arch/imx-regs.h>
-#include <linux/sizes.h>
 #include "mx6_common.h"
 
-#define CONFIG_MX6
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_SYS_GENERIC_BOARD
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (35 * SZ_1M) /* Increase due to DFU */
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_MXC_GPIO
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_IPS_BASE_ADDR
 
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
+#define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
 #define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
-
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
-/* Command definition */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-#define CONFIG_BOOTDELAY               3
-
-#define CONFIG_LOADADDR                        0x82000000
-#define CONFIG_SYS_TEXT_BASE           0x87800000
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              256
+#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* Watchdog */
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_IMX_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + SZ_256M)
 
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               SZ_128K
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE                        SZ_512M
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
@@ -115,45 +58,35 @@
 /* VDD voltage 1.65 - 1.95 */
 #define CONFIG_SYS_SD_VOLTAGE          0x00000080
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 /* USB Configs */
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1 /* Only OTG2 port enabled */
 #endif
 
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
-
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
-
-#define CONFIG_G_DNL_VENDOR_NUM                0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM       0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER      "FSL"
-
-#define CONFIG_CMD_DFU
-#define CONFIG_DFU_FUNCTION
-#define CONFIG_DFU_MMC
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
+
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT 300
 
+/* I2C Configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_SPEED             100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77696
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
        "image=zImage\0" \