+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* Configuration settings for the Wandboard.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
-#include <config_distro_defaults.h>
#include "mx6_common.h"
-#include "imx6_spl.h"
-
-#define CONFIG_MACH_TYPE MACH_TYPE_WANDBOARD_IMX6
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
-
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
-
-/* SATA Configs */
-
-#define CONFIG_CMD_SATA
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
-#define CONFIG_SYS_SATA_MAX_DEVICE 1
-#define CONFIG_DWC_AHSATA_PORT_ID 0
-#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#define CONFIG_LIBATA
-#endif
-
-#define CONFIG_SYS_MEMTEST_START 0x10000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CFG_MXC_UART_BASE UART1_BASE
/* MMC Configuration */
-#define CONFIG_SYS_FSL_USDHC_NUM 2
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CFG_SYS_FSL_USDHC_NUM 2
+#define CFG_SYS_FSL_ESDHC_ADDR 0
/* USB Configs */
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-
-/* Ethernet Configuration */
-#define CONFIG_FEC_MXC
-#define CONFIG_MII
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 1
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ATHEROS
-
-/* Framebuffer */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_IPUV3
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 260000000
-#define CONFIG_CMD_HDMIDETECT
-#define CONFIG_IMX_HDMI
-#define CONFIG_IMX_VIDEO_SKIP
-#endif
+#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CFG_MXC_USB_FLAGS 0
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "console=ttymxc0,115200\0" \
+#define CFG_EXTRA_ENV_SETTINGS \
+ "console=ttymxc0\0" \
"splashpos=m,m\0" \
+ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"fdtfile=undefined\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdt_addr=0x18000000\0" \
"ip_dyn=yes\0" \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+ "finduuid=part uuid mmc 0:1 uuid\0" \
"update_sd_firmware_filename=u-boot.imx\0" \
"update_sd_firmware=" \
"if test ${ip_dyn} = yes; then " \
"fi; " \
"fi\0" \
"findfdt="\
+ "if test $board_name = D1 && test $board_rev = MX6QP ; then " \
+ "setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \
+ "if test $board_name = D1 && test $board_rev = MX6Q ; then " \
+ "setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \
+ "if test $board_name = D1 && test $board_rev = MX6DL ; then " \
+ "setenv fdtfile imx6dl-wandboard-revd1.dtb; fi; " \
"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
"setenv fdtfile imx6q-wandboard.dtb; fi; " \
"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine dtb to use; fi; \0" \
- "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
- "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"ramdisk_addr_r=0x13000000\0" \
"ramdiskaddr=0x13000000\0" \
- "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
BOOTENV
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
+ func(MMC, mmc, 2) \
+ func(SATA, sata, 0) \
func(USB, usb, 0) \
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run distro_bootcmd"
-
#include <config_distro_bootcmd.h>
+#include <linux/stringify.h>
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
/* Environment organization */
-#define CONFIG_ENV_SIZE (8 * 1024)
-
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET (768 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV 0
#endif /* __CONFIG_H * */