Merge with git://www.denx.de/git/u-boot.git

[platform/kernel/u-boot.git] / include / configs / walnut.h

diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index 1171ee5..180549e 100644 (file)
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -68,6 +68,7 @@
        "bootfile=/tftpboot/walnut/uImage\0"                            \
        "kernel_addr=fff80000\0"                                        \
        "ramdisk_addr=fff80000\0"                                       \
+       "initrd_high=30000000\0"                                        \
        "load=tftp 100000 /tftpboot/walnut/u-boot.bin\0"                \
        "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"   \
                "cp.b 100000 fffc0000 40000;"                           \
@@ -90,27 +91,45 @@
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                1       /* PHY address                  */
 
+#define CFG_RX_ETH_BUFFER      16      /* use 16 rx buffer on 405 emac */
+
+#define CONFIG_NETCONSOLE              /* include NetConsole support   */
+#define CONFIG_NET_MULTI               /* needed for NetConsole        */
+
 #define CONFIG_RTC_DS174x      1       /* use DS1743 RTC in Walnut     */
 
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_DIAG    | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_NET     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_SDRAM   | \
-                               CFG_CMD_SNTP    )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -121,7 +140,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -156,16 +175,12 @@
 
 #define CFG_HZ         1000            /* decrementer freq: 1 ms ticks */
 
-#define CONFIG_AUTO_COMPLETE   1       /* add autocompletion support   */
+#define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_LOOPW           1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
 
-#define CFG_RX_ETH_BUFFER      16      /* use 16 rx buffer on 405 emac */
-
-#define CONFIG_NETCONSOLE              /* include NetConsole support   */
-#define CONFIG_NET_MULTI               /* needed for NetConsole        */
-
 /*-----------------------------------------------------------------------
  * I2C stuff
  *-----------------------------------------------------------------------
@@ -175,6 +190,13 @@
 #define CFG_I2C_SPEED          400000  /* I2C speed and slave address  */
 #define CFG_I2C_SLAVE          0x7F
 
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR    (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
@@ -273,7 +295,7 @@
 #define CFG_DCACHE_SIZE                16384   /* For AMCC 405 CPUs, older 405 ppc's   */
                                        /* have only 8kB, 16kB is save here     */
 #define CFG_CACHELINE_SIZE     32      /* ...                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 #endif
 
@@ -330,7 +352,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM  0x02            /* Software reboot                      */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif