Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE

[platform/kernel/u-boot.git] / include / configs / vme8349.h

diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 3c5dba3..81c7489 100644 (file)
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -2,7 +2,7 @@
  * esd vme8349 U-Boot configuration file
  * Copyright (c) 2008, 2009 esd gmbh Hannover Germany
  *
- * (C) Copyright 2006
+ * (C) Copyright 2006-2010
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * reinhard.arlt@esd-electronics.de
@@ -37,7 +37,7 @@
 /*
  * Top level Makefile configuration choices
  */
-#ifdef CONFIG_caddy2
+#ifdef CONFIG_CADDY2
 #define VME_CADDY2
 #endif
 
@@ -50,21 +50,23 @@
 #define CONFIG_MPC8349         1       /* MPC8349 specific */
 #define CONFIG_VME8349         1       /* ESD VME8349 board specific */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
+
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_PCI
 /* Don't enable PCI2 on vme834x - it doesn't exist physically. */
 #undef CONFIG_MPC83XX_PCI2             /* support for 2nd PCI controller */
 
-#define PCI_66M
-#ifdef PCI_66M
+#define CONFIG_PCI_66M
+#ifdef CONFIG_PCI_66M
 #define CONFIG_83XX_CLKIN      66000000        /* in Hz */
 #else
 #define CONFIG_83XX_CLKIN      33000000        /* in Hz */
 #endif
 
 #ifndef CONFIG_SYS_CLK_FREQ
-#ifdef PCI_66M
+#ifdef CONFIG_PCI_66M
 #define CONFIG_SYS_CLK_FREQ    66000000
 #define HRCWL_CSB_TO_CLKIN     HRCWL_CSB_TO_CLKIN_4X1
 #else
@@ -149,7 +151,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase TO (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write TO (ms) */
 
-#define CONFIG_SYS_MONITOR_BASE                TEXT_BASE       /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -159,10 +161,10 @@
 
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #define CONFIG_SYS_INIT_RAM_ADDR       0xF7000000      /* Initial RAM addr */
-#define CONFIG_SYS_INIT_RAM_END                0x1000          /* size */
+#define CONFIG_SYS_INIT_RAM_SIZE               0x1000          /* size */
 
 #define CONFIG_SYS_GBL_DATA_SIZE       0x100           /* size init data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - \
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
                                         CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -538,14 +540,6 @@
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */