hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c

[platform/kernel/u-boot.git] / include / configs / virtlab2.h

diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 38b0a4e..4bb96cc 100644 (file)
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -37,9 +37,11 @@
 #define CONFIG_VIRTLAB2                1       /* ...on a virtlab2 module      */
 #define        CONFIG_TQM8xxL          1
 
+#define        CONFIG_SYS_TEXT_BASE    0x40000000
+
 #define        CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_SYS_SMC_RXBUFLEN        128
+#define CONFIG_SYS_MAXIDLE     10
 #define CONFIG_BAUDRATE                115200  /* console baudrate = 115kbps   */
 
 #define        CONFIG_BOOTCOUNT_LIMIT
@@ -117,6 +119,7 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
@@ -137,9 +140,6 @@
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define        CONFIG_SYS_HUSH_PARSER          1       /* use "hush" command parser    */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define        CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
@@ -157,8 +157,6 @@
 
 #define        CONFIG_SYS_HZ                   1000    /* decrementer freq: 1 ms ticks */
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -173,9 +171,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define        CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
-#define        CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define        CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define        CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -224,7 +221,9 @@
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT         "nor0=TQM8xxL-0"
 
 #define MTDPARTS_DEFAULT       "mtdparts=TQM8xxL-0:256k(u-boot),"      \
@@ -472,15 +471,6 @@
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /* Map peripheral control registers on CS4 */
 #define CONFIG_SYS_PERIPHERAL_BASE 0xA0000000
 #define CONFIG_SYS_PERIPHERAL_OR_AM 0xFFFF8000 /* 32 kB address mask */
@@ -488,4 +478,10 @@
                                                OR_SCY_2_CLK)
 #define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_PERIPHERAL_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
 #define PCMCIA_CTRL (CONFIG_SYS_PERIPHERAL_BASE + 0xB00)
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT       1
+#define CONFIG_OF_BOARD_SETUP  1
+#define CONFIG_HWCONFIG                1
+
 #endif /* __CONFIG_H */