configs: Migrate CMD_NAND*

[platform/kernel/u-boot.git] / include / configs / vf610twr.h

diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index dcfafaf..04abe1e 100644 (file)
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -11,10 +11,6 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_VF610
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_MACH_TYPE               4146
@@ -24,7 +20,6 @@
 /* Enable passing of ATAGs */
 #define CONFIG_CMDLINE_TAG
 
-#define CONFIG_CMD_FUSE
 #ifdef CONFIG_CMD_FUSE
 #define CONFIG_MXC_OCOTP
 #endif
@@ -32,33 +27,17 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define LPUART_BASE                    UART1_BASE
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_UART_PORT           (1)
-#define CONFIG_BAUDRATE                        115200
 
 /* NAND support */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_USE_ARCH_MEMCPY
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR
 
-/* UBI */
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
 /* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 #define MTDIDS_DEFAULT                 "nand0=fsl_nfc"
@@ -71,21 +50,10 @@
                                        "-(rootfs)"
 #endif
 
-#define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
 
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -97,21 +65,18 @@
 /* QSPI Configs*/
 
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_CMD_SF
 #define FSL_QSPI_FLASH_SIZE            (1 << 24)
 #define FSL_QSPI_FLASH_NUM             2
 #define CONFIG_SYS_FSL_QSPI_LE
 #endif
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_SPD_BUS_NUM         0
 
-#define CONFIG_BOOTDELAY               3
 
 #define CONFIG_SYS_LOAD_ADDR           0x82000000
 
@@ -225,8 +190,6 @@
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #undef CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE              \
@@ -234,16 +197,9 @@
 #define CONFIG_SYS_MAXARGS             16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80010000
 #define CONFIG_SYS_MEMTEST_END         0x87C00000
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE               (128 * 1024)    /* regular stack */
-
 /* Physical memory map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     (0x80000000)
@@ -258,9 +214,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
 #ifdef CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_SIZE                        (8 * 1024)
 
@@ -275,7 +228,4 @@
 #define CONFIG_ENV_OFFSET              0x180000
 #endif
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
 #endif