+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2011 ARM Limited
* (C) Copyright 2010 Linaro
*
* Configuration for Versatile Express. Parts were derived from other ARM
* configurations.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __VEXPRESS_COMMON_H
* Definitions copied from linux kernel:
* arch/arm/mach-vexpress/include/mach/motherboard.h
*/
-#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
+#ifdef VEXPRESS_ORIGINAL_MEMORY_MAP
/* CS register bases for the original memory map. */
#define V2M_PA_CS0 0x40000000
#define V2M_PA_CS1 0x44000000
#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
#define V2M_BASE 0x60000000
-#define CONFIG_SYS_TEXT_BASE 0x60800000
#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
/* CS register bases for the extended memory map. */
#define V2M_PA_CS0 0x08000000
#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(3))
#define V2M_BASE 0x80000000
-#define CONFIG_SYS_TEXT_BASE 0x80800000
#endif
/*
/* Common peripherals relative to CS7. */
#define V2M_AACI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
-#define V2M_MMCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
#define V2M_KMI0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
#define V2M_KMI1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))
/* Board info register */
#define SYS_ID V2M_SYSREGS
-#define CONFIG_REVISION_TAG 1
-
-#define CONFIG_SYS_MEMTEST_START V2M_BASE
-#define CONFIG_SYS_MEMTEST_END 0x20000000
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_SYS_L2CACHE_OFF 1
-#define CONFIG_INITRD_TAG 1
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
#define SCTL_BASE V2M_SYSCTL
#define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0)
#define CONFIG_SYS_TIMER_COUNTS_DOWN
/* PL011 Serial Configuration */
-#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 24000000
#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
(void *)CONFIG_SYS_SERIAL1}
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0 V2M_UART0
#define CONFIG_SYS_SERIAL1 V2M_UART1
-#define CONFIG_ARM_PL180_MMCI
-#define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
-#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000)
#define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000)
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
#define PHYS_SDRAM_2 (((unsigned int)V2M_BASE) + \
((unsigned int)0x20000000))
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
-#include <config_distro_defaults.h>
-
/* Basic environment settings */
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
-#define CONFIG_PLATFORM_ENV_SETTINGS \
- "loadaddr=0x80008000\0" \
- "ramdisk_addr_r=0x61000000\0" \
- "kernel_addr=0x44100000\0" \
- "ramdisk_addr=0x44800000\0" \
- "maxramdisk=0x1800000\0" \
- "pxefile_addr_r=0x88000000\0" \
- "scriptaddr=0x88000000\0" \
- "kernel_addr_r=0x80008000\0"
-#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
-#define CONFIG_PLATFORM_ENV_SETTINGS \
- "loadaddr=0xa0008000\0" \
- "ramdisk_addr_r=0x81000000\0" \
- "kernel_addr=0x0c100000\0" \
- "ramdisk_addr=0x0c800000\0" \
- "maxramdisk=0x1800000\0" \
- "pxefile_addr_r=0xa8000000\0" \
- "scriptaddr=0xa8000000\0" \
- "kernel_addr_r=0xa0008000\0"
-#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_PLATFORM_ENV_SETTINGS \
+ "kernel_addr_r=0x60100000\0" \
+ "fdt_addr_r=0x60000000\0" \
+ "bootargs=console=tty0 console=ttyAMA0,38400n8\0" \
BOOTENV \
"console=ttyAMA0,38400n8\0" \
"dram=1024M\0" \
"devtmpfs.mount=0 vmalloc=256M\0" \
"bootflash=run flashargs; " \
"cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
- "bootm ${kernel_addr} ${ramdisk_addr_r}\0"
+ "bootm ${kernel_addr} ${ramdisk_addr_r}\0" \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0"
/* FLASH and environment organization */
#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_FLASH_SIZE 0x04000000
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_FLASH_BASE0 V2M_NOR0
#define FLASH_MAX_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
/* Room required on the stack for the environment data */
-#define CONFIG_ENV_SIZE FLASH_MAX_SECTOR_SIZE
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
/*
* Amount of flash used for environment:
* We don't know which end has the small erase blocks so we use the penultimate
* sector location for the environment
*/
-#define CONFIG_ENV_SECT_SIZE FLASH_MAX_SECTOR_SIZE
-#define CONFIG_ENV_OVERWRITE 1
/* Store environment at top of flash */
-#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - \
- (2 * CONFIG_ENV_SECT_SIZE))
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE1 + \
- CONFIG_ENV_OFFSET)
-#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE0, \
CONFIG_SYS_FLASH_BASE1 }
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_LONGHELP
#endif /* VEXPRESS_COMMON_H */