/* Common peripherals relative to CS7. */
#define V2M_AACI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
-#define V2M_MMCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
#define V2M_KMI0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
#define V2M_KMI1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))
/* Board info register */
#define SYS_ID V2M_SYSREGS
-#define CONFIG_REVISION_TAG 1
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_SYS_L2CACHE_OFF 1
-#define CONFIG_INITRD_TAG 1
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024) /* >= 512 KiB */
#define SCTL_BASE V2M_SYSCTL
#define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0)
#define CONFIG_SYS_SERIAL0 V2M_UART0
#define CONFIG_SYS_SERIAL1 V2M_UART1
-#define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
-#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000)
#define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000)
/* Physical Memory Map */
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
-#define CONFIG_PLATFORM_ENV_SETTINGS \
- "loadaddr=0x80008000\0" \
- "ramdisk_addr_r=0x61000000\0" \
- "kernel_addr=0x44100000\0" \
- "ramdisk_addr=0x44800000\0" \
- "maxramdisk=0x1800000\0" \
- "pxefile_addr_r=0x88000000\0" \
- "scriptaddr=0x88000000\0" \
- "kernel_addr_r=0x80008000\0"
-#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
-#define CONFIG_PLATFORM_ENV_SETTINGS \
- "loadaddr=0xa0008000\0" \
- "ramdisk_addr_r=0x81000000\0" \
- "kernel_addr=0x0c100000\0" \
- "ramdisk_addr=0x0c800000\0" \
- "maxramdisk=0x1800000\0" \
- "pxefile_addr_r=0xa8000000\0" \
- "scriptaddr=0xa8000000\0" \
- "kernel_addr_r=0xa0008000\0"
-#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_PLATFORM_ENV_SETTINGS \
+ "kernel_addr_r=0x60100000\0" \
+ "fdt_addr_r=0x60000000\0" \
+ "bootargs=console=tty0 console=ttyAMA0,38400n8\0" \
BOOTENV \
"console=ttyAMA0,38400n8\0" \
"dram=1024M\0" \
* We don't know which end has the small erase blocks so we use the penultimate
* sector location for the environment
*/
-#define CONFIG_ENV_OVERWRITE 1
/* Store environment at top of flash */
#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */