#include <linux/stringify.h>
-#define CONFIG_REMAKE_ELF
-
/* Link Definitions */
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
#else
/* ATF loads u-boot here for BASE_FVP model */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
#endif
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
/* CS register bases for the original memory map. */
-#define V2M_BASE 0x80000000
+#ifdef CONFIG_TARGET_VEXPRESS64_BASER_FVP
+#define V2M_DRAM_BASE 0x00000000
+#define V2M_PA_BASE 0x80000000
+#else
+#define V2M_DRAM_BASE 0x80000000
#define V2M_PA_BASE 0x00000000
+#endif
#define V2M_PA_CS0 (V2M_PA_BASE + 0x00000000)
#define V2M_PA_CS1 (V2M_PA_BASE + 0x14000000)
#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY 24000000 /* 24MHz */
-
/* Generic Interrupt Controller Definitions */
#ifdef CONFIG_GICV3
#define GICD_BASE (V2M_PA_BASE + 0x2f000000)
#define CONFIG_PL011_CLOCK 24000000
#endif
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* Miscellaneous configurable options */
-
/* Physical Memory Map */
-#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1 (V2M_DRAM_BASE) /* SDRAM Bank #1 */
/* Top 16MB reserved for secure world use */
#define DRAM_SEC_SIZE 0x01000000
#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE
#define PHYS_SDRAM_2_SIZE 0x80000000
#endif
-/* Enable memtest */
-
-/* Initial environment variables */
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-/* Copy the kernel and FDT to DRAM memory and boot */
+/* Copy the kernel, initrd and FDT from NOR flash to DRAM memory and boot. */
#define BOOTENV_DEV_AFS(devtypeu, devtypel, instance) \
"bootcmd_afs=" \
"afs load ${kernel_name} ${kernel_addr_r} ;"\
"booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}\0"
#define BOOTENV_DEV_NAME_AFS(devtypeu, devtypel, instance) "afs "
+/* Boot by executing a U-Boot script pre-loaded into DRAM. */
+#define BOOTENV_DEV_MEM(devtypeu, devtypel, instance) \
+ "bootcmd_mem= " \
+ "source ${scriptaddr}; " \
+ "if test $? -eq 1; then " \
+ " env import -t ${scriptaddr}; " \
+ " if test -n $uenvcmd; then " \
+ " echo Running uenvcmd ...; " \
+ " run uenvcmd; " \
+ " fi; " \
+ "fi\0"
+#define BOOTENV_DEV_NAME_MEM(devtypeu, devtypel, instance) "mem "
+
+#ifdef CONFIG_CMD_VIRTIO
+#define FUNC_VIRTIO(func) func(VIRTIO, virtio, 0)
+#else
+#define FUNC_VIRTIO(func)
+#endif
+
+/*
+ * Boot by loading an Android image, or kernel, initrd and FDT through
+ * semihosting into DRAM.
+ */
+#define BOOTENV_DEV_SMH(devtypeu, devtypel, instance) \
+ "bootcmd_smh= " \
+ "if load hostfs - ${boot_addr_r} ${boot_name}; then" \
+ " setenv bootargs;" \
+ " abootimg addr ${boot_addr_r};" \
+ " abootimg get dtb --index=0 fdt_addr_r;" \
+ " bootm ${boot_addr_r} ${boot_addr_r} ${fdt_addr_r};" \
+ "else" \
+ " if load hostfs - ${kernel_addr_r} ${kernel_name}; then" \
+ " setenv fdt_high 0xffffffffffffffff;" \
+ " setenv initrd_high 0xffffffffffffffff;" \
+ " load hostfs - ${fdt_addr_r} ${fdtfile};" \
+ " load hostfs - ${ramdisk_addr_r} ${ramdisk_name};" \
+ " fdt addr ${fdt_addr_r};" \
+ " fdt resize;" \
+ " fdt chosen ${ramdisk_addr_r} ${filesize};" \
+ " booti $kernel_addr_r - $fdt_addr_r;" \
+ " fi;" \
+ "fi\0"
+#define BOOTENV_DEV_NAME_SMH(devtypeu, devtypel, instance) "smh "
+
+/* Boot sources for distro boot and load addresses, per board */
+
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO /* Arm Juno board */
+
#define BOOT_TARGET_DEVICES(func) \
func(USB, usb, 0) \
func(SATA, sata, 0) \
func(DHCP, dhcp, na) \
func(AFS, afs, na)
-#include <config_distro_bootcmd.h>
+#define VEXPRESS_KERNEL_ADDR 0x80080000
+#define VEXPRESS_PXEFILE_ADDR 0x8fb00000
+#define VEXPRESS_FDT_ADDR 0x8fc00000
+#define VEXPRESS_SCRIPT_ADDR 0x8fd00000
+#define VEXPRESS_RAMDISK_ADDR 0x8fe00000
-/*
- * Defines where the kernel and FDT exist in NOR flash and where it will
- * be copied into DRAM
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_name=norkern\0" \
- "kernel_alt_name=Image\0" \
- "kernel_addr_r=0x80080000\0" \
- "ramdisk_name=ramdisk.img\0" \
- "ramdisk_addr_r=0x88000000\0" \
- "fdtfile=board.dtb\0" \
- "fdt_alt_name=juno\0" \
- "fdt_addr_r=0x80000000\0" \
- BOOTENV
-
-#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
-
-#define VEXPRESS_KERNEL_ADDR 0x80080000
-#define VEXPRESS_FDT_ADDR 0x8fc00000
-#define VEXPRESS_BOOT_ADDR 0x8fd00000
-#define VEXPRESS_RAMDISK_ADDR 0x8fe00000
+#define EXTRA_ENV_NAMES \
+ "kernel_name=norkern\0" \
+ "kernel_alt_name=Image\0" \
+ "ramdisk_name=ramdisk.img\0" \
+ "fdtfile=board.dtb\0" \
+ "fdt_alt_name=juno\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_name=Image\0" \
- "kernel_addr_r=" __stringify(VEXPRESS_KERNEL_ADDR) "\0" \
- "ramdisk_name=ramdisk.img\0" \
- "ramdisk_addr_r=" __stringify(VEXPRESS_RAMDISK_ADDR) "\0" \
- "fdtfile=devtree.dtb\0" \
- "fdt_addr_r=" __stringify(VEXPRESS_FDT_ADDR) "\0" \
- "boot_name=boot.img\0" \
- "boot_addr_r=" __stringify(VEXPRESS_BOOT_ADDR) "\0"
+#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP /* ARMv8-A base model */
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(SMH, smh, na) \
+ func(MEM, mem, na) \
+ FUNC_VIRTIO(func) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+
+#define VEXPRESS_KERNEL_ADDR 0x80080000
+#define VEXPRESS_PXEFILE_ADDR 0x8fa00000
+#define VEXPRESS_SCRIPT_ADDR 0x8fb00000
+#define VEXPRESS_FDT_ADDR 0x8fc00000
+#define VEXPRESS_BOOT_ADDR 0x8fd00000
+#define VEXPRESS_RAMDISK_ADDR 0x8fe00000
+
+#define EXTRA_ENV_NAMES \
+ "kernel_name=Image\0" \
+ "ramdisk_name=ramdisk.img\0" \
+ "fdtfile=devtree.dtb\0" \
+ "boot_name=boot.img\0" \
+ "boot_addr_r=" __stringify(VEXPRESS_BOOT_ADDR) "\0"
+
+#elif CONFIG_TARGET_VEXPRESS64_BASER_FVP /* ARMv8-R base model */
+#define BOOT_TARGET_DEVICES(func) \
+ func(MEM, mem, na) \
+ FUNC_VIRTIO(func) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+
+#define VEXPRESS_KERNEL_ADDR 0x00200000
+#define VEXPRESS_PXEFILE_ADDR 0x0fb00000
+#define VEXPRESS_FDT_ADDR 0x0fc00000
+#define VEXPRESS_SCRIPT_ADDR 0x0fd00000
+#define VEXPRESS_RAMDISK_ADDR 0x0fe00000
+
+#define EXTRA_ENV_NAMES \
+ "kernel_name=Image\0" \
+ "ramdisk_name=ramdisk.img\0" \
+ "fdtfile=board.dtb\0"
#endif
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 64 /* max command args */
+#include <config_distro_bootcmd.h>
+
+/* Default load addresses and names for the different payloads. */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_addr_r=" __stringify(VEXPRESS_KERNEL_ADDR) "\0" \
+ "ramdisk_addr_r=" __stringify(VEXPRESS_RAMDISK_ADDR) "\0" \
+ "pxefile_addr_r=" __stringify(VEXPRESS_PXEFILE_ADDR) "\0" \
+ "fdt_addr_r=" __stringify(VEXPRESS_FDT_ADDR) "\0" \
+ "scriptaddr=" __stringify(VEXPRESS_SCRIPT_ADDR) "\0" \
+ EXTRA_ENV_NAMES \
+ BOOTENV
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_SYS_FLASH_BASE 0x08000000
/* Store environment at top of flash */
#endif
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
-#endif
-
#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
#define FLASH_MAX_SECTOR_SIZE 0x00040000