Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI

[platform/kernel/u-boot.git] / include / configs / verdin-imx8mm.h

diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index 82bff36..50c8083 100644 (file)
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -9,18 +9,15 @@
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CSF_SIZE                        SZ_8K
-#endif
-
 #define CONFIG_SPL_MAX_SIZE            (148 * 1024)
 #define CONFIG_SYS_MONITOR_LEN         SZ_512K
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SYS_UBOOT_BASE  \
        (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
+#define CONFIG_SYS_BOOTM_LEN           SZ_64M
+
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_STACK               0x920000
 #define CONFIG_SPL_BSS_START_ADDR      0x910000
@@ -40,9 +37,6 @@
        "ramdisk_addr_r=0x46400000\0" \
        "scriptaddr=0x46000000\0"
 
-#define CONFIG_LOADADDR                0x40480000
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
 /* Enable Distro Boot */
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
@@ -87,30 +81,20 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_ENV_OVERWRITE
 #if defined(CONFIG_ENV_IS_IN_MMC)
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_SYS_MMC_ENV_DEV         0       /* USDHC1 eMMC */
-#define CONFIG_SYS_MMC_ENV_PART        1
 #endif
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          SZ_32M
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 
 /* SDRAM configuration */
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE                        SZ_2G /* 2GB DDR */
 
-#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + \
-                                        (PHYS_SDRAM_SIZE >> 1))
-
 /* UART */
 #define CONFIG_MXC_UART_BASE           UART1_BASE_ADDR
 
 /* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_CBSIZE              SZ_2K
 #define CONFIG_SYS_MAXARGS             64
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
@@ -121,7 +105,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_MMC_IMG_LOAD_PART   1
-#define CONFIG_SYS_I2C_SPEED           100000
 
 /* ENET */
 #define CONFIG_ETHPRIME                 "FEC"
@@ -130,5 +113,9 @@
 #define FEC_QUIRK_ENET_MAC
 #define IMX_FEC_BASE                   0x30BE0000
 
-#endif /*_VERDIN_IMX8MM_H */
+/* USB Configs */
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
+#endif /*_VERDIN_IMX8MM_H */