Merge branch 'next' of git://git.denx.de/u-boot-avr32

[platform/kernel/u-boot.git] / include / configs / v38b.h

diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 0b7b19e..3574548 100644 (file)
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -46,10 +46,7 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM          0x02    /* Software reboot */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
-#endif
+#define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
  * Serial console configuration
@@ -89,28 +86,37 @@
 #define CONFIG_USB_CLOCK       0x0001BBBB
 #define CONFIG_USB_CONFIG      0x00001000
 
+
 /*
- * Supported commands
+ * BOOTP options
  */
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_FAT    | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_IDE    | \
-                                CFG_CMD_PING   | \
-                                CFG_CMD_DHCP   | \
-                                CFG_CMD_DIAG   | \
-                                CFG_CMD_IRQ    | \
-                                CFG_CMD_JFFS2  | \
-                                CFG_CMD_MII    | \
-                                CFG_CMD_SDRAM  | \
-                                CFG_CMD_DATE   | \
-                                CFG_CMD_USB    | \
-                                CFG_CMD_FAT)
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
 
-#define CONFIG_TIMESTAMP               /* Print image info with timestamp */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_TIMESTAMP               /* Print image info with timestamp */
 
 /*
  * Boot low with 16 MB Flash
@@ -124,7 +130,7 @@
 #define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds */
 
 #define CONFIG_PREBOOT "echo;" \
-       "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+       "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
        "echo"
 
 #undef CONFIG_BOOTARGS
@@ -195,7 +201,7 @@
  * Flash configuration - use CFI driver
  */
 #define CFG_FLASH_CFI          1               /* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER   1               /* Use the common driver */
+#define CONFIG_FLASH_CFI_DRIVER        1               /* Use the common driver */
 #define CFG_FLASH_CFI_AMD_RESET        1
 #define CFG_FLASH_BASE         0xFF000000
 #define CFG_MAX_FLASH_BANKS    1               /* max num of flash banks */
@@ -254,7 +260,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size */
@@ -270,6 +276,11 @@
 
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */