global: Migrate CONFIG_MXC_UART_BASE to CFG

[platform/kernel/u-boot.git] / include / configs / usbarmory.h

diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h
index 4bebc59..00b45cc 100644 (file)
--- a/include/configs/usbarmory.h
+++ b/include/configs/usbarmory.h
@@ -1,69 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * USB armory MkI board configuration settings
  * http://inversepath.com/usbarmory
  *
  * Copyright (C) 2015, Inverse Path
  * Andrej Rosano <andrej@inversepath.com>
- *
- * SPDX-License-Identifier:|____GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_SYS_FSL_CLK
-#define CONFIG_MXC_GPIO
-
 #include <asm/arch/imx-regs.h>
 
-#include <config_distro_defaults.h>
-
 /* U-Boot environment */
-#define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
-#define CONFIG_ENV_SIZE                (8 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV 0
 
 /* U-Boot general configurations */
-#define CONFIG_SYS_CBSIZE      512
 
 /* UART */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE   UART1_BASE
-#define CONFIG_CONS_INDEX      1
+#define CFG_MXC_UART_BASE      UART1_BASE
 
 /* SD/MMC */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
-#define CONFIG_SYS_FSL_ESDHC_NUM       1
+#define CFG_SYS_FSL_ESDHC_ADDR 0
 
 /* USB */
-#define CONFIG_USB_EHCI_MX5
 #define CONFIG_MXC_USB_PORT    1
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-
-/* Fuse */
-#define CONFIG_FSL_IIM
-
-/* U-Boot memory offsets */
-#define CONFIG_LOADADDR                0x72000000
-#define CONFIG_SYS_TEXT_BASE   0x77800000
-#define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
-
 /* Linux boot */
-#define CONFIG_HOSTNAME                usbarmory
-#define CONFIG_BOOTCOMMAND                                             \
-       "run distro_bootcmd; "                                          \
-       "setenv bootargs console=${console} ${bootargs_default}; "      \
-       "ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; "              \
-       "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; "             \
-       "bootz ${kernel_addr_r} - ${fdt_addr_r}"
 
 #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
 
@@ -76,7 +40,7 @@
        "pxefile_addr_r=0x70800000\0"           \
        "ramdisk_addr_r=0x73000000\0"
 
-#define CONFIG_EXTRA_ENV_SETTINGS                              \
+#define CFG_EXTRA_ENV_SETTINGS                         \
        MEM_LAYOUT_ENV_SETTINGS                                 \
        "bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0"    \
        "fdtfile=imx53-usbarmory.dtb\0"                         \
@@ -89,22 +53,11 @@
 #endif
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     CSD0_BASE_ADDR
 #define PHYS_SDRAM_SIZE                        (gd->ram_size)
 
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#define CONFIG_SYS_MEMTEST_START       0x70000000
-#define CONFIG_SYS_MEMTEST_END         0x90000000
-
-#define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
+#define CFG_SYS_SDRAM_BASE             PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR  IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE  IRAM_SIZE
 
 #endif                         /* __CONFIG_H */