/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ * Copyright (C) 2012-2015 Panasonic Corporation
+ * Copyright (C) 2015 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#define CONFIG_SDRAM1_SIZE 0x10000000
#endif
+#define CONFIG_I2C_EEPROM
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
/*
* Support card address map
*/
#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SYS_MALLOC_F_LEN 0x2000
-
/*-----------------------------------------------------------------------
* MMU and Cache Setting
*----------------------------------------------------------------------*/
/* #define CONFIG_SYS_ICACHE_OFF */
/* #define CONFIG_SYS_DCACHE_OFF */
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
/* Comment out the following to enable L2 cache */
#define CONFIG_UNIPHIER_L2CACHE_ON
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MISC_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
-# define CONFIG_SYS_MAX_FLASH_BANKS 1
-# define CONFIG_SYS_FLASH_BANKS_LIST {0x00000000}
-# define CONFIG_SYS_FLASH_BANKS_SIZES {0x02000000}
-#endif
-
-#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-# define CONFIG_SYS_MAX_FLASH_BANKS 1
-# define CONFIG_SYS_FLASH_BANKS_LIST {0x04000000}
-# define CONFIG_SYS_FLASH_BANKS_SIZES {0x04000000}
-#endif
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2
/* serial console configuration */
#define CONFIG_BAUDRATE 115200
/* USB */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4
#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE
#define CONFIG_DOS_PARTITION
"image_offset=0x00080000\0" \
"image_size=0x00f00000\0" \
"verify=n\0" \
- "norboot=run add_default_bootargs;" \
+ "nandupdate=nand erase 0 0x100000 &&" \
+ "tftpboot u-boot-spl.bin &&" \
+ "nand write $loadaddr 0 0x10000 &&" \
+ "tftpboot u-boot-dtb.img &&" \
+ "nand write $loadaddr 0x10000 0xf0000\0" \
+ "norboot=run add_default_bootargs &&" \
"bootm $image_offset\0" \
- "nandboot=run add_default_bootargs;" \
- "nand read $loadaddr $image_offset $image_size;" \
- "bootm\0" \
+ "nandboot=run add_default_bootargs &&" \
+ "nand read $loadaddr $image_offset $image_size &&" \
+ "bootm\0" \
"add_default_bootargs=setenv bootargs $bootargs" \
" console=ttyS0,$baudrate\0" \
#define CONFIG_SPL_TEXT_BASE 0x00100000
#endif
-#define CONFIG_BOARD_POSTCLK_INIT
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-#define CONFIG_SYS_SPL_MALLOC_START (0x0ff00000)
-#define CONFIG_SYS_SPL_MALLOC_SIZE (0x00004000)
+#define CONFIG_SPL_STACK (0x0ff08000)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
-#define CONFIG_SYS_INIT_SP_ADDR (0x0ff08000)
+#define CONFIG_PANIC_HANG
#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000
+#define CONFIG_SPL_MAX_FOOTPRINT 0x10000
+
#endif /* __CONFIG_UNIPHIER_COMMON_H__ */