/* U-Boot - Common settings for UniPhier Family */
-#ifndef __CONFIG_UNIPHIER_COMMON_H__
-#define __CONFIG_UNIPHIER_COMMON_H__
+#ifndef __CONFIG_UNIPHIER_H__
+#define __CONFIG_UNIPHIER_H__
#ifndef CONFIG_SPL_BUILD
#include <config_distro_bootcmd.h>
#define BOOTENV
#endif
-#define CONFIG_ARMV7_PSCI_1_0
-
-/*-----------------------------------------------------------------------
- * MMU and Cache Setting
- *----------------------------------------------------------------------*/
-
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-
-#define CONFIG_TIMESTAMP
-
-/* FLASH related */
-
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_MONITOR_BASE 0
-#define CONFIG_SYS_MONITOR_LEN 0x000d0000 /* 832KB */
-#define CONFIG_SYS_FLASH_BASE 0
-
-/*
- * flash_toggle does not work for our support card.
- * We need to use flash_status_poll.
- */
-#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
-
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
-
-/* serial console configuration */
-
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-
-#define CONFIG_ENV_OFFSET 0x100000
-#define CONFIG_ENV_SIZE 0x2000
-/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
-
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_SYS_MMC_ENV_PART 1
+#define CONFIG_SYS_MONITOR_LEN 0x00200000 /* 2MB */
#if !defined(CONFIG_ARM64)
/* Time clock 1MHz */
#endif
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
-
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
/*
* Network Configuration
#define CONFIG_GATEWAYIP 192.168.11.1
#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_LOADADDR 0x85000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_BOOTM_LEN (32 << 20)
#if defined(CONFIG_ARM64)
#endif
#define CONFIG_ROOTPATH "/nfs/root/path"
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs $bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
- "run __nfsboot"
#ifdef CONFIG_FIT
-#define CONFIG_BOOTFILE "fitImage"
+#define KERNEL_ADDR_R_OFFSET "0x05100000"
#define LINUXBOOT_ENV_SETTINGS \
- "kernel_addr_r=0x85100000\0" \
"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
"bootm $kernel_addr_r\0" \
"__nfsboot=run tftpboot\0"
#else
#ifdef CONFIG_ARM64
-#define CONFIG_BOOTFILE "Image"
#define LINUXBOOT_CMD "booti"
-#define KERNEL_ADDR_R "kernel_addr_r=0x82080000\0"
+#define KERNEL_ADDR_R_OFFSET "0x02080000"
#else
-#define CONFIG_BOOTFILE "zImage"
#define LINUXBOOT_CMD "bootz"
-#define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0"
+#define KERNEL_ADDR_R_OFFSET "0x00208000"
#endif
#define LINUXBOOT_ENV_SETTINGS \
- "fdt_addr_r=0x85100000\0" \
- KERNEL_ADDR_R \
- "ramdisk_addr_r=0x86000000\0" \
- "ramdisk_file=rootfs.cpio.gz\0" \
"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
"tftpboot=tftpboot $kernel_addr_r $bootfile && " \
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_addr_r_offset=0x05100000\0" \
+ "kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \
+ "ramdisk_addr_r_offset=0x06000000\0" \
+ "ramdisk_file=rootfs.cpio.gz\0" \
"netdev=eth0\0" \
"initrd_high=0xffffffffffffffff\0" \
+ "loadaddr_offset=0x05000000\0" \
"script=boot.scr\0" \
"scriptaddr=0x85000000\0" \
"nor_base=0x42000000\0" \
"emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
"nandboot=run bootcmd_ubifs0\0" \
"norboot=run tftpboot\0" \
+ "sdboot=sdsetn && run bootcmd_mmc${sd_first_dev}\0" \
"usbboot=run bootcmd_usb0\0" \
"emmcscript=setenv devtype mmc && " \
"mmcsetn && " \
"ubi part UBI && " \
"ubifsmount ubi0:boot && " \
"ubifsload ${loadaddr} ${script} && " \
- "source\0" \
+ "source $loadaddr\0" \
+ "sdscript=setenv devtype mmc && " \
+ "sdsetn && " \
+ "setenv devnum ${sd_first_dev} && " \
+ "run loadscript_fat\0" \
"norscript=echo Running ${script} from tftp ... && " \
"tftpboot ${script} &&" \
- "source\0" \
+ "source $loadaddr\0" \
"usbscript=usb start && " \
"setenv devtype usb && " \
"setenv devnum 0 && " \
"run loadscript_fat\0" \
"loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
"load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
- "source\0" \
+ "source $loadaddr\0" \
"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
"tftpboot $tmp_addr $second_image && " \
"setexpr tmp_addr $nor_base + 0x70000 && " \
"nand write $loadaddr 0 0x00020000 && " \
"tftpboot $third_image && " \
"nand write $loadaddr 0x00020000 0x001e0000\0" \
+ "sdupdate=sdsetn &&" \
+ "mmc dev $sd_first_dev &&" \
+ "tftpboot $second_image && " \
+ "mmc write $loadaddr 0 100 && " \
+ "tftpboot $third_image && " \
+ "mmc write $loadaddr 100 f00\0" \
"usbupdate=usb start &&" \
"tftpboot $second_image && " \
"usb write $loadaddr 0 100 && " \
#define CONFIG_SYS_BOOTMAPSZ 0x20000000
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
-
/* only for SPL */
-#if defined(CONFIG_ARCH_UNIPHIER_LD4) || \
- defined(CONFIG_ARCH_UNIPHIER_SLD8)
-#endif
-
-#define CONFIG_SPL_STACK (0x00200000)
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
/* subtract sizeof(struct image_header) */
#define CONFIG_SYS_UBOOT_BASE (0x130000 - 0x40)
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_MAX_FOOTPRINT 0x10000
-#define CONFIG_SPL_MAX_SIZE 0x10000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
-
-#define CONFIG_SPL_PAD_TO 0x20000
-#endif /* __CONFIG_UNIPHIER_COMMON_H__ */
+#endif /* __CONFIG_UNIPHIER_H__ */
projects / platform / kernel / u-boot.git / blobdiff