#define CONFIG_ARMV7_PSCI_1_0
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
/*-----------------------------------------------------------------------
* MMU and Cache Setting
*----------------------------------------------------------------------*/
/* FLASH related */
#define CONFIG_MTD_DEVICE
-#define CONFIG_SMC911X_32_BIT
-/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
-#define CONFIG_SMC911X_BASE 0
-
-#ifdef CONFIG_MICRO_SUPPORT_CARD
-#define CONFIG_SMC911X
-#else
-#define CONFIG_SYS_NO_FLASH
-#endif
-
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
/* serial console configuration */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
#define CONFIG_CONS_INDEX 1
-/* #define CONFIG_ENV_IS_NOWHERE */
-/* #define CONFIG_ENV_IS_IN_NAND */
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET 0x80000
+#define CONFIG_ENV_OFFSET 0x100000
#define CONFIG_ENV_SIZE 0x2000
/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 1
-#ifdef CONFIG_ARMV8_MULTIENTRY
-#define CPU_RELEASE_ADDR 0x80000000
-#define COUNTER_FREQUENCY 50000000
-#define CONFIG_GICV3
-#define GICD_BASE 0x5fe00000
-#if defined(CONFIG_ARCH_UNIPHIER_LD11)
-#define GICR_BASE 0x5fe40000
-#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
-#define GICR_BASE 0x5fe80000
-#endif
-#elif !defined(CONFIG_ARM64)
+#if !defined(CONFIG_ARM64)
/* Time clock 1MHz */
#define CONFIG_SYS_TIMER_RATE 1000000
#endif
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_MAX_CHIPS 2
#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-#define CONFIG_NAND_DENALI_ECC_SIZE 1024
-
-#ifdef CONFIG_ARCH_UNIPHIER_SLD3
-#define CONFIG_SYS_NAND_REGS_BASE 0xf8100000
-#define CONFIG_SYS_NAND_DATA_BASE 0xf8000000
-#else
#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
-#endif
-
-#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
-
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
-/* USB */
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4
-#define CONFIG_FAT_WRITE
-
/* SD/MMC */
#define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_GENERIC_MMC
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_LOADADDR 0x84000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_BOOTM_LEN (32 << 20)
#define CONFIG_CMDLINE_EDITING /* add command line history */
+#if defined(CONFIG_ARM64)
+/* ARM Trusted Firmware */
+#define BOOT_IMAGES \
+ "second_image=unph_bl.bin\0" \
+ "third_image=fip.bin\0"
+#else
+#define BOOT_IMAGES \
+ "second_image=u-boot-spl.bin\0" \
+ "third_image=u-boot.bin\0"
+#endif
+
#define CONFIG_BOOTCOMMAND "run $bootmode"
#define CONFIG_ROOTPATH "/nfs/root/path"
"__nfsboot=run tftpboot\0"
#else
#ifdef CONFIG_ARM64
-#define CONFIG_BOOTFILE "Image"
+#define CONFIG_BOOTFILE "Image.gz"
#define LINUXBOOT_CMD "booti"
-#define KERNEL_ADDR_R "kernel_addr_r=0x80080000\0"
-#define KERNEL_SIZE "kernel_size=0x00c00000\0"
-#define RAMDISK_ADDR "ramdisk_addr=0x00e00000\0"
+#define KERNEL_ADDR_LOAD "kernel_addr_load=0x84200000\0"
+#define KERNEL_ADDR_R "kernel_addr_r=0x82080000\0"
#else
#define CONFIG_BOOTFILE "zImage"
#define LINUXBOOT_CMD "bootz"
+#define KERNEL_ADDR_LOAD "kernel_addr_load=0x80208000\0"
#define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0"
-#define KERNEL_SIZE "kernel_size=0x00800000\0"
-#define RAMDISK_ADDR "ramdisk_addr=0x00a00000\0"
#endif
#define LINUXBOOT_ENV_SETTINGS \
"fdt_addr=0x00100000\0" \
"fdt_addr_r=0x84100000\0" \
"fdt_size=0x00008000\0" \
"kernel_addr=0x00200000\0" \
+ KERNEL_ADDR_LOAD \
KERNEL_ADDR_R \
- KERNEL_SIZE \
- RAMDISK_ADDR \
+ "kernel_size=0x00800000\0" \
+ "ramdisk_addr=0x00a00000\0" \
"ramdisk_addr_r=0x84a00000\0" \
"ramdisk_size=0x00600000\0" \
"ramdisk_file=rootfs.cpio.uboot\0" \
- "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
+ "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
+ "if test $kernel_addr_load = $kernel_addr_r; then " \
+ "true; " \
+ "else " \
+ "unzip $kernel_addr_load $kernel_addr_r; " \
+ "fi && " \
LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
- "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
- "setexpr kernel_size $kernel_size / 4 &&" \
- "cp $kernel_addr $kernel_addr_r $kernel_size &&" \
- "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
- "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
+ "norboot=setexpr kernel_addr_nor $nor_base + $kernel_addr && " \
+ "setexpr kernel_size_div4 $kernel_size / 4 && " \
+ "cp $kernel_addr_nor $kernel_addr_load $kernel_size_div4 && " \
+ "setexpr ramdisk_addr_nor $nor_base + $ramdisk_addr && " \
+ "setexpr ramdisk_size_div4 $ramdisk_size / 4 && " \
+ "cp $ramdisk_addr_nor $ramdisk_addr_r $ramdisk_size_div4 && " \
+ "setexpr fdt_addr_nor $nor_base + $fdt_addr && " \
+ "setexpr fdt_size_div4 $fdt_size / 4 && " \
+ "cp $fdt_addr_nor $fdt_addr_r $fdt_size_div4 && " \
"run boot_common\0" \
- "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
+ "nandboot=nand read $kernel_addr_load $kernel_addr $kernel_size && " \
"nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
"nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
"run boot_common\0" \
- "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
+ "tftpboot=tftpboot $kernel_addr_load $bootfile && " \
"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
"tftpboot $fdt_addr_r $fdt_file &&" \
"run boot_common\0" \
- "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
+ "__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
"tftpboot $fdt_addr_r $fdt_file &&" \
"setenv ramdisk_addr_r - &&" \
"run boot_common\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "verify=n\0" \
+ "initrd_high=0xffffffffffffffff\0" \
"nor_base=0x42000000\0" \
"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
- "tftpboot $tmp_addr u-boot-spl.bin &&" \
- "setexpr tmp_addr $nor_base + 0x60000 &&" \
- "tftpboot $tmp_addr u-boot.bin\0" \
+ "tftpboot $tmp_addr $second_image && " \
+ "setexpr tmp_addr $nor_base + 0x70000 && " \
+ "tftpboot $tmp_addr $third_image\0" \
"emmcupdate=mmcsetn &&" \
"mmc partconf $mmc_first_dev 0 1 1 &&" \
- "tftpboot u-boot-spl.bin &&" \
- "mmc write $loadaddr 0 80 &&" \
- "tftpboot u-boot.bin &&" \
- "mmc write $loadaddr 80 780\0" \
+ "tftpboot $second_image && " \
+ "mmc write $loadaddr 0 100 && " \
+ "tftpboot $third_image && " \
+ "mmc write $loadaddr 100 700\0" \
"nandupdate=nand erase 0 0x00100000 &&" \
- "tftpboot u-boot-spl.bin &&" \
- "nand write $loadaddr 0 0x00010000 &&" \
- "tftpboot u-boot.bin &&" \
- "nand write $loadaddr 0x00010000 0x000f0000\0" \
+ "tftpboot $second_image && " \
+ "nand write $loadaddr 0 0x00020000 && " \
+ "tftpboot $third_image && " \
+ "nand write $loadaddr 0x00020000 0x000e0000\0" \
+ "usbupdate=usb start &&" \
+ "tftpboot $second_image && " \
+ "usb write $loadaddr 0 100 && " \
+ "tftpboot $third_image && " \
+ "usb write $loadaddr 100 700\0" \
+ BOOT_IMAGES \
LINUXBOOT_ENV_SETTINGS
#define CONFIG_SYS_BOOTMAPSZ 0x20000000
/* for LD20; the last 64 byte is used for dynamic DDR PHY training */
#define CONFIG_SYS_MEM_TOP_HIDE 64
-#define CONFIG_PANIC_HANG
-
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
/* only for SPL */
-#if defined(CONFIG_ARM64)
-#define CONFIG_SPL_TEXT_BASE 0x30000000
-#elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
- defined(CONFIG_ARCH_UNIPHIER_LD4) || \
+#if defined(CONFIG_ARCH_UNIPHIER_LD4) || \
defined(CONFIG_ARCH_UNIPHIER_SLD8)
#define CONFIG_SPL_TEXT_BASE 0x00040000
#else
#define CONFIG_SPL_TEXT_BASE 0x00100000
#endif
-#if defined(CONFIG_ARCH_UNIPHIER_LD11)
-#define CONFIG_SPL_STACK (0x30014c00)
-#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
-#define CONFIG_SPL_STACK (0x3001c000)
-#else
#define CONFIG_SPL_STACK (0x00100000)
-#endif
#define CONFIG_SPL_FRAMEWORK
-#ifdef CONFIG_ARM64
-#define CONFIG_SPL_BOARD_LOAD_IMAGE
-#endif
-#define CONFIG_SPL_BOARD_INIT
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
/* subtract sizeof(struct image_header) */
-#define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40)
+#define CONFIG_SYS_UBOOT_BASE (0x70000 - 0x40)
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_MAX_FOOTPRINT 0x10000
#define CONFIG_SPL_MAX_SIZE 0x10000
-#if defined(CONFIG_ARCH_UNIPHIER_LD11)
-#define CONFIG_SPL_BSS_START_ADDR 0x30012000
-#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
-#define CONFIG_SPL_BSS_START_ADDR 0x30016000
-#endif
#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
+#define CONFIG_SPL_PAD_TO 0x20000
+
#endif /* __CONFIG_UNIPHIER_COMMON_H__ */