global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDR

[platform/kernel/u-boot.git] / include / configs / udoo_neo.h

diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h
index 60b76ed..a4b8514 100644 (file)
--- a/include/configs/udoo_neo.h
+++ b/include/configs/udoo_neo.h
@@ -1,34 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014-2015 Freescale Semiconductor, Inc.
  * Copyright Jasbir Matharu
  * Copyright 2015 UDOO Team
  *
  * Configuration settings for the UDOO NEO board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 #include "imx6_spl.h"
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (3 * SZ_1M)
-#define CONFIG_MXC_UART
 
 /* MMC Configuration */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
 
 /* Command definition */
 #define CONFIG_MXC_UART_BASE           UART1_BASE
-#define CONFIG_SYS_MMC_ENV_DEV         0  /*USDHC2*/
 
 /* Linux only */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "console=ttymxc0,115200\0" \
        "fdt_high=0xffffffff\0" \
@@ -50,28 +45,21 @@
                        "setenv fdtfile imx6sx-udoo-neo-extended.dtb; fi; " \
                "if test $fdtfile = UNDEFINED; then " \
                        "echo WARNING: Could not determine dtb to use; fi\0" \
-       "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-       "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+       "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        "ramdisk_addr_r=0x84000000\0" \
-       "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+       "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        BOOTENV
 
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(DHCP, dhcp, na)
 
-#define CONFIG_BOOTCOMMAND \
-       "run findfdt; " \
-       "run distro_bootcmd"
-
 #include <config_distro_bootcmd.h>
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x10000)
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
@@ -82,18 +70,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* Environment organization */
-#define CONFIG_ENV_OFFSET              (8 * SZ_64K)
-#define CONFIG_ENV_SIZE                        SZ_8K
-
-#define CONFIG_IMX_THERMAL
-
-/* I2C configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1
-#define CONFIG_SYS_I2C_SPEED           100000
-
 /* PMIC */
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
@@ -101,18 +77,4 @@
 #define CONFIG_POWER_PFUZE3000_I2C_ADDR        0x08
 #define PFUZE3000_I2C_BUS      0
 
-/* Network */
-#define CONFIG_FEC_MXC
-#define CONFIG_MII
-
-#define CONFIG_FEC_ENET_DEV 0
-#define IMX_FEC_BASE                   ENET_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR          0x0
-
-#define CONFIG_FEC_XCV_TYPE             RMII
-#define CONFIG_ETHPRIME                 "FEC0"
-
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-
 #endif                         /* __CONFIG_H */