Move PHYLIB to Kconfig

[platform/kernel/u-boot.git] / include / configs / udoo_neo.h

diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h
index 81e0481..39d1589 100644 (file)
--- a/include/configs/udoo_neo.h
+++ b/include/configs/udoo_neo.h
@@ -18,8 +18,6 @@
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (3 * SZ_1M)
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_UART
 
 /* MMC Configuration */
@@ -27,7 +25,6 @@
 
 /* Command definition */
 #define CONFIG_MXC_UART_BASE           UART1_BASE
-#define CONFIG_SYS_FSL_USDHC_NUM       2
 #define CONFIG_SYS_MMC_ENV_DEV         0  /*USDHC2*/
 
 /* Linux only */
@@ -36,32 +33,32 @@
        "console=ttymxc0,115200\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
-       "fdt_file=undefined\0" \
+       "fdtfile=undefined\0" \
        "fdt_addr=0x83000000\0" \
+       "fdt_addr_r=0x83000000\0" \
        "ip_dyn=yes\0" \
        "mmcdev=0\0" \
        "mmcrootfstype=ext4\0" \
-       "mmcautodetect=no\0" \
        "findfdt="\
                "if test $board_name = BASIC; then " \
-                       "setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
+                       "setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
                "if test $board_name = BASICKS; then " \
-                       "setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
+                       "setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
                "if test $board_name = FULL; then " \
-                       "setenv fdt_file imx6sx-udoo-neo-full.dtb; fi; " \
+                       "setenv fdtfile imx6sx-udoo-neo-full.dtb; fi; " \
                "if test $board_name = EXTENDED; then " \
-                       "setenv fdt_file imx6sx-udoo-neo-extended.dtb; fi; " \
-               "if test $fdt_file = UNDEFINED; then " \
-                       "echo WARNING: Could not determine dtb to use; fi; \0" \
+                       "setenv fdtfile imx6sx-udoo-neo-extended.dtb; fi; " \
+               "if test $fdtfile = UNDEFINED; then " \
+                       "echo WARNING: Could not determine dtb to use; fi\0" \
        "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
        "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-       "ramdisk_addr_r=0x83000000\0" \
-       "ramdiskaddr=0x83000000\0" \
+       "ramdisk_addr_r=0x84000000\0" \
        "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
        BOOTENV
 
 #define BOOT_TARGET_DEVICES(func) \
-       func(MMC, mmc, 0)
+       func(MMC, mmc, 0) \
+       func(DHCP, dhcp, na)
 
 #define CONFIG_BOOTCOMMAND \
        "run findfdt; " \
@@ -72,7 +69,6 @@
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x10000)
-#define CONFIG_STACKSIZE               SZ_128K
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -89,6 +85,33 @@
 /* Environment organization */
 #define CONFIG_ENV_OFFSET              (8 * SZ_64K)
 #define CONFIG_ENV_SIZE                        SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
+
+#define CONFIG_IMX_THERMAL
+
+/* I2C configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1
+#define CONFIG_SYS_I2C_SPEED           100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR        0x08
+#define PFUZE3000_I2C_BUS      0
+
+/* Network */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+
+#define CONFIG_FEC_ENET_DEV 0
+#define IMX_FEC_BASE                   ENET_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR          0x0
+
+#define CONFIG_FEC_XCV_TYPE             RMII
+#define CONFIG_ETHPRIME                 "FEC0"
+
+#define CONFIG_PHY_MICREL
 
 #endif                         /* __CONFIG_H */