powerpc, 8xx: remove support for 8xx

[platform/kernel/u-boot.git] / include / configs / udoo.h

diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index 86899c4..d84aa16 100644 (file)
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -11,14 +11,14 @@
 
 #include "mx6_common.h"
 
-#define MACH_TYPE_UDOO         4800
-#define CONFIG_MACH_TYPE       MACH_TYPE_UDOO
+#include "imx6_spl.h"
+
+/* Provide the MACH_TYPE value that the vendor kernel requires. */
+#define CONFIG_MACH_TYPE               4800
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (2 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART2_BASE
 
@@ -36,10 +36,6 @@
 
 /* Network support */
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                    ENET_BASE_ADDR
@@ -50,33 +46,13 @@
 #define CONFIG_PHY_MICREL
 #define CONFIG_PHY_MICREL_KSZ9031
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
-/* Command definition */
-
-#define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
-
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
 
 /* MMC Configuration */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_DEFAULT_FDT_FILE                "imx6q-udoo.dtb"
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
@@ -85,7 +61,7 @@
        "splashpos=m,m\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
-       "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+       "fdt_file=undefined\0" \
        "fdt_addr=0x18000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
@@ -109,11 +85,11 @@
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
                "root=${mmcroot}\0" \
        "loadbootscript=" \
-               "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+               "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source\0" \
-       "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-       "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+       "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+       "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
@@ -152,9 +128,17 @@
                        "fi; " \
                "else " \
                        "bootz; " \
-               "fi;\0"
+               "fi;\0" \
+               "findfdt=" \
+                       "if test $board_rev = MX6Q ; then " \
+                               "setenv fdt_file imx6q-udoo.dtb; fi; " \
+                       "if test $board_rev = MX6DL ; then " \
+                               "setenv fdt_file imx6dl-udoo.dtb; fi; " \
+                       "if test $fdt_file = undefined; then " \
+                               "echo WARNING: Could not determine dtb to use; fi; \0"
 
 #define CONFIG_BOOTCOMMAND \
+          "run findfdt; " \
           "mmc dev ${mmcdev}; if mmc rescan; then " \
                   "if run loadbootscript; then " \
                           "run bootscript; " \
@@ -166,18 +150,8 @@
                   "fi; " \
           "else run netboot; fi"
 
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              256
-
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS            16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_CMDLINE_EDITING
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -199,11 +173,4 @@
 #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV         0
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 #endif                        /* __CONFIG_H * */