*
* specific parts for B&R T-Series Motherboard
*
- * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> -
+ * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
*
* SPDX-License-Identifier: GPL-2.0+
#ifndef __CONFIG_TSERIES_H__
#define __CONFIG_TSERIES_H__
+#include <configs/bur_cfg_common.h>
#include <configs/bur_am335x_common.h>
/* ------------------------------------------------------------------------- */
#define CONFIG_AM335X_LCD
#define CONFIG_LCD
-#define CONFIG_LCD_NOSTDOUT
+#define CONFIG_LCD_ROTATION
+#define CONFIG_LCD_DT_SIMPLEFB
#define CONFIG_SYS_WHITE_ON_BLACK
#define LCD_BPP LCD_COLOR32
#define CONFIG_HW_WATCHDOG
#define CONFIG_OMAP_WATCHDOG
#define CONFIG_SPL_WATCHDOG_SUPPORT
+
+#define CONFIG_SPL_GPIO_SUPPORT
/* Bootcount using the RTC block */
#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_AM33XX
+
+/* memory */
+#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
+
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
#define CONFIG_POWER_TPS65217
/* Support both device trees and ATAGs. */
-#define CONFIG_OF_LIBFDT
#define CONFIG_USE_FDT /* use fdt within board code */
-#define CONFIG_OF_BOARD_SETUP
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#endif /* CONFIG_NAND */
-/* Always 128 KiB env size */
-#define CONFIG_ENV_SIZE (128 << 10)
+/* Always 64 KiB env size */
+#define CONFIG_ENV_SIZE (64 << 10)
#ifdef CONFIG_NAND
#define NANDARGS \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
- "root=${nandroot} " \
- "rootfstype=${nandrootfstype}\0" \
- "nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \
- "nandrootfstype=ubifs rootwait=1\0" \
- "nandimgsize=0x500000\0" \
- "nandboot=echo Booting from nand ...; " \
+ "${optargs_rot} " \
+ "root=mtd6 " \
+ "rootfstype=jffs2\0" \
+ "kernelsize=0x400000\0" \
+ "nandboot=echo booting from nand ...; " \
"run nandargs; " \
- "nand read ${loadaddr} kernel ${nandimgsize}; " \
- "bootz ${loadaddr}\0"
+ "nand read ${loadaddr} kernel ${kernelsize}; " \
+ "bootz ${loadaddr} - ${dtbaddr}\0" \
+ "defboot=run nandboot\0" \
+ "bootlimit=1\0" \
+ "simplefb=1\0 " \
+ "altbootcmd=run usbscript\0"
#else
#define NANDARGS ""
#endif /* CONFIG_NAND */
#ifdef CONFIG_MMC
#define MMCARGS \
- "silent=1\0"
+"dtbdev=mmc\0" \
+"dtbpart=0:1\0" \
+"mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \
+"mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
+ "root=/dev/mmcblk0p2 rootfstype=ext4\0" \
+"mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \
+ "setenv simplefb 1; " \
+ "ext4load mmc 0:1 ${loadaddr} /${kernel}; " \
+ "ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \
+ "run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \
+"mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \
+ "setenv simplefb 0; " \
+ "ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \
+ "run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \
+"defboot=ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
+ "ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \
+ "run ramboot; run usbscript;\0" \
+"bootlimit=1\0" \
+"altbootcmd=run mmcboot0;\0" \
+"upduboot=dhcp; " \
+ "tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \
+ "tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0"
#else
#define MMCARGS ""
#endif /* CONFIG_MMC */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
- "autoload=0\0" \
- "loadaddr=0x80200000\0" \
- "bootfile=zImage\0" \
- "console=ttyO0,115200n8\0" \
- "optargs=\0" \
- "rootpath=/tftpboot/tseries/rootfs-small\0" \
- "nfsopts=nolock\0" \
- "netargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=/dev/nfs " \
- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
- "ip=dhcp\0" \
- "netboot=echo Booting from network ...; " \
- "setenv autoload no; " \
- "dhcp; " \
- "tftp ${loadaddr} ${bootfile}; " \
- "run netargs; " \
- "bootm ${loadaddr}\0" \
- "usbupdate=echo Updating UBOOT from USB-Stick ...; " \
- "usb start; " \
- "fatload usb 0 0x80000000 updateubootusb.img; " \
- "source;\0" \
- "netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
- "setenv autoload 0; " \
- "dhcp;" \
- "tftp 0x80000000 updateUBOOT.img;" \
- "source;\0" \
- NANDARGS \
- MMCARGS
+BUR_COMMON_ENV \
+"verify=no\0" \
+"autoload=0\0" \
+"dtb=bur-ppt-ts30.dtb\0" \
+"dtbaddr=0x80100000\0" \
+"loadaddr=0x80200000\0" \
+"ramaddr=0x80A00000\0" \
+"kernel=zImage\0" \
+"ramdisk=rootfs.cpio.uboot\0" \
+"console=ttyO0,115200n8\0" \
+"optargs=consoleblank=0 quiet panic=2\0" \
+"nfsroot=/tftpboot/tseries/rootfs-small\0" \
+"nfsopts=nolock\0" \
+"ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \
+"netargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=/dev/nfs " \
+ "nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \
+ "ip=dhcp\0" \
+"netboot=echo Booting from network ...; " \
+ "dhcp; " \
+ "tftp ${loadaddr} ${kernel}; " \
+ "tftp ${dtbaddr} ${dtb}; " \
+ "run netargs; " \
+ "bootz ${loadaddr} - ${dtbaddr}\0" \
+"ramboot=echo Booting from network into RAM ...; "\
+ "if dhcp; then; " \
+ "tftp ${loadaddr} ${kernel}; " \
+ "tftp ${ramaddr} ${ramdisk}; " \
+ "if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \
+ "then; else tftp ${dtbaddr} ${dtb}; fi;" \
+ "run mmcroot0; " \
+ "bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \
+"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
+ "setenv autoload 0; " \
+ "dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \
+NANDARGS \
+MMCARGS
#endif /* !CONFIG_SPL_BUILD*/
#define CONFIG_BOOTCOMMAND \
- "run mmcboot1;"
-#define CONFIG_BOOTDELAY 1 /* TODO: für release auf 0 setzen */
+ "run defboot;"
+#define CONFIG_BOOTDELAY 0
#ifdef CONFIG_NAND
/*
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x8000000
#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_CMD_NAND
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \
- "128k(SPL)," \
- "128k(SPL.backup1)," \
- "128k(SPL.backup2)," \
- "128k(SPL.backup3)," \
- "512k(u-boot)," \
- "128k(u-boot-spl-os)," \
+ "128k(MLO)," \
+ "128k(MLO.backup)," \
+ "128k(dtb)," \
"128k(u-boot-env)," \
- "5m(kernel),"\
- "-(rootfs)"
+ "512k(u-boot)," \
+ "4m(kernel),"\
+ "128m(rootfs),"\
+ "-(user)"
+#define CONFIG_NAND_OMAP_GPMC_WSCFG 1
#endif /* CONFIG_NAND */
/* USB configuration */
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_MUSB_PIO_ONLY
-#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
+#define CONFIG_USB_MUSB_PIO_ONLY
+#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
/* attention! not only for gadget, enables also highspeed in hostmode */
#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_MUSB_HOST
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-#ifdef CONFIG_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_MUSB_HOST */
-
#if defined(CONFIG_SPI_BOOT)
/* McSPI IP block */
#define CONFIG_SPI
#define CONFIG_OMAP3_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SF_DEFAULT_SPEED 24000000
#define CONFIG_SPL_SPI_SUPPORT
#else
#define CONFIG_ENV_IS_IN_NAND
#endif
-#define CONFIG_ENV_OFFSET 0x120000 /* TODO: Adresse definieren */
+#define CONFIG_ENV_OFFSET 0x60000
#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE
#else
#error "no storage for Environment defined!"