configs: move CONFIG_SPL_TEXT_BASE to Kconfig

[platform/kernel/u-boot.git] / include / configs / tricorder.h

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 6e80e5b..683375a 100644 (file)
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2006-2008
  * Texas Instruments.
@@ -9,8 +10,6 @@
  * Thomas Weber <weber@corscience.de>
  *
  * Configuration settings for the Tricorder board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -23,9 +22,6 @@
  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  * other needs.
  */
-#define CONFIG_SYS_TEXT_BASE           0x80100000
-
-#define CONFIG_SDRC                    /* The chip has SDRC controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap.h>
@@ -34,8 +30,6 @@
 #define V_OSCK                         26000000 /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK >> 1)
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -52,17 +46,12 @@
 #define CONFIG_SYS_NS16550_CLK         48000000 /* 48MHz (APLL96/2) */
 
 /* select serial console configuration */
-#define CONFIG_CONS_INDEX              3
 #define CONFIG_SYS_NS16550_COM3                OMAP34XX_UART3
-#define CONFIG_SERIAL3                 3
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
 
 /* I2C */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
-#define CONFIG_SYS_I2C_OMAP34XX
  
 
 /* EEPROM */
@@ -70,42 +59,22 @@
 #define CONFIG_SYS_EEPROM_BUS_NUM      1
 
 /* TWL4030 */
-#define CONFIG_TWL4030_LED
 
 /* Board NAND Info */
-#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
-#define MTDIDS_DEFAULT                 "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT               "mtdparts=omap2-nand.0:" \
-                                               "128k(SPL)," \
-                                               "1m(u-boot)," \
-                                               "384k(u-boot-env1)," \
-                                               "1152k(mtdoops)," \
-                                               "384k(u-boot-env2)," \
-                                               "5m(kernel)," \
-                                               "2m(fdt)," \
-                                               "-(ubi)"
-
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
-                                                       /* to access nand */
 #define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
                                                        /* to access nand at */
                                                        /* CS0 */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
-#define CONFIG_BCH
 #define CONFIG_SYS_NAND_MAX_OOBFREE    2
 #define CONFIG_SYS_NAND_MAX_ECCPOS     56
 
 /* needed for ubi */
-#define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
 
 /* Environment information (this is the common part) */
 
 
 /* hang() the board on panic() */
-#define CONFIG_PANIC_HANG
 
 /* environment placement (for NAND), is different for FLASHCARD but does not
  * harm there */
@@ -124,8 +93,8 @@
        "vram=3M\0" \
        "defaultdisplay=lcd\0" \
        "kernelopts=mtdoops.mtddev=3\0" \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
-       "mtdids=" MTDIDS_DEFAULT "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
        "commonargs=" \
                "setenv bootargs console=${console} " \
                "${mtdparts} " \
@@ -208,17 +177,7 @@
 #endif /* CONFIG_FLASHCARD */
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING         /* enable cmdline history */
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args */
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE            (CONFIG_SYS_CBSIZE)
 
 #define CONFIG_SYS_MEMTEST_START       (OMAP34XX_SDRC_CS0 + 0x00000000)
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + \
@@ -235,7 +194,6 @@
 #define CONFIG_SYS_PTV                 2 /* Divisor: 2^(PTV+1) => 8 */
 
 /*  Physical Memory Map  */
-#define CONFIG_NR_DRAM_BANKS           2 /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1                   OMAP34XX_SDRC_CS0
 #define PHYS_SDRAM_2                   OMAP34XX_SDRC_CS1
 
@@ -254,17 +212,13 @@
 #define CONFIG_SYS_SRAM_SIZE           0x10000
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 
-#define CONFIG_SPL_TEXT_BASE           0x40200000 /*CONFIG_SYS_SRAM_START*/
 #define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
                                         CONFIG_SPL_TEXT_BASE)
 
@@ -297,6 +251,5 @@
 #define CONFIG_SYS_SPL_MALLOC_START    0x80208000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000        /* 1 MB */
 
-#define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x81000000
 #endif /* __CONFIG_H */