configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs

[platform/kernel/u-boot.git] / include / configs / tricorder.h

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index d9ab91c..55f2585 100644 (file)
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2006-2008
  * Texas Instruments.
@@ -9,8 +10,6 @@
  * Thomas Weber <weber@corscience.de>
  *
  * Configuration settings for the Tricorder board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -23,7 +22,6 @@
  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  * other needs.
  */
-#define CONFIG_SYS_TEXT_BASE           0x80100000
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap.h>
@@ -32,8 +30,6 @@
 #define V_OSCK                         26000000 /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK >> 1)
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -50,16 +46,12 @@
 #define CONFIG_SYS_NS16550_CLK         48000000 /* 48MHz (APLL96/2) */
 
 /* select serial console configuration */
-#define CONFIG_CONS_INDEX              3
 #define CONFIG_SYS_NS16550_COM3                OMAP34XX_UART3
-#define CONFIG_SERIAL3                 3
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
 
 /* I2C */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
  
 
 /* EEPROM */
@@ -67,13 +59,8 @@
 #define CONFIG_SYS_EEPROM_BUS_NUM      1
 
 /* TWL4030 */
-#define CONFIG_TWL4030_LED
 
 /* Board NAND Info */
-#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
-
-#define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
-                                                       /* to access nand */
 #define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
                                                        /* to access nand at */
                                                        /* CS0 */
@@ -83,20 +70,14 @@
 #define CONFIG_SYS_NAND_MAX_ECCPOS     56
 
 /* needed for ubi */
-#define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
 
 /* Environment information (this is the common part) */
 
 
 /* hang() the board on panic() */
-#define CONFIG_PANIC_HANG
 
 /* environment placement (for NAND), is different for FLASHCARD but does not
  * harm there */
-#define CONFIG_ENV_OFFSET              0x120000    /* env start */
-#define CONFIG_ENV_OFFSET_REDUND       0x2A0000    /* redundant env start */
-#define CONFIG_ENV_SIZE                        (16 << 10)  /* use 16KiB for env */
 #define CONFIG_ENV_RANGE               (384 << 10) /* allow badblocks in env */
 
 /* the loadaddr is the same as CONFIG_SYS_LOAD_ADDR, unfortunately the defiend
@@ -146,9 +127,6 @@
        "bootm ${loadaddr} ${rdaddr}\0"
 
 #else /* CONFIG_FLASHCARD */
-
-#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        CONFIG_COMMON_ENV_SETTINGS \
        "mmcargs=" \
@@ -193,15 +171,8 @@
 #endif /* CONFIG_FLASHCARD */
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING         /* enable cmdline history */
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 
-#define CONFIG_SYS_MEMTEST_START       (OMAP34XX_SDRC_CS0 + 0x00000000)
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + \
-                                       0x07000000) /* 112 MB */
-
 #define CONFIG_SYS_LOAD_ADDR           (OMAP34XX_SDRC_CS0 + 0x02000000)
 
 /*
@@ -213,7 +184,6 @@
 #define CONFIG_SYS_PTV                 2 /* Divisor: 2^(PTV+1) => 8 */
 
 /*  Physical Memory Map  */
-#define CONFIG_NR_DRAM_BANKS           2 /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1                   OMAP34XX_SDRC_CS0
 #define PHYS_SDRAM_2                   OMAP34XX_SDRC_CS1
 
@@ -227,20 +197,10 @@
                                                CONFIG_SYS_INIT_RAM_SIZE - \
                                                GENERATED_GBL_DATA_SIZE)
 
-/* SRAM config */
-#define CONFIG_SYS_SRAM_START          0x40200000
-#define CONFIG_SYS_SRAM_SIZE           0x10000
-
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 
-#define CONFIG_SPL_TEXT_BASE           0x40200000 /*CONFIG_SYS_SRAM_START*/
 #define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
                                         CONFIG_SPL_TEXT_BASE)
 
@@ -273,6 +233,4 @@
 #define CONFIG_SYS_SPL_MALLOC_START    0x80208000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000        /* 1 MB */
 
-#define CONFIG_SYS_ALT_MEMTEST
-#define CONFIG_SYS_MEMTEST_SCRATCH     0x81000000
 #endif /* __CONFIG_H */