#ifndef __CONFIG_TRATS_H
#define __CONFIG_TRATS_H
-#include <configs/exynos4-dt.h>
-
-#define CONFIG_SYS_PROMPT "Trats # " /* Monitor Command Prompt */
+#include <configs/exynos4-common.h>
#define CONFIG_TRATS
-#undef CONFIG_DEFAULT_DEVICE_TREE
-#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-trats
#define CONFIG_TIZEN /* TIZEN lib */
#define CONFIG_SYS_TEXT_BASE 0x63300000
-#include <linux/sizes.h>
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE 115200
#define CONFIG_MACH_TYPE MACH_TYPE_TRATS
#define CONFIG_BOOTARGS "Please use defined boot"
-#define CONFIG_BOOTCOMMAND "run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+#define CONFIG_BOOTCOMMAND "run autoboot"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
#define CONFIG_DFU_ALT \
"u-boot raw 0x80 0x400;" \
- "uImage ext4 0 2;" \
- "modem.bin ext4 0 2;" \
- "exynos4210-trats.dtb ext4 0 2;" \
+ "/uImage ext4 0 2;" \
+ "/modem.bin ext4 0 2;" \
+ "/exynos4210-trats.dtb ext4 0 2;" \
""PARTS_CSA" part 0 1;" \
""PARTS_BOOT" part 0 2;" \
""PARTS_QBOOT" part 0 3;" \
""PARTS_ROOT" part 0 5;" \
""PARTS_DATA" part 0 6;" \
""PARTS_UMS" part 0 7;" \
- "params.bin raw 0x38 0x8\0"
+ "params.bin raw 0x38 0x8;" \
+ "/Image.itb ext4 0 2\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootk=" \
"bootm 0x40007FC0 - ${fdtaddr};" \
"fi;" \
"bootm 0x40007FC0;\0" \
- "updatemmc=" \
- "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
- "mmc boot 0 1 1 0\0" \
"updatebackup=" \
- "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
- "mmc boot 0 1 1 0\0" \
+ "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
+ "mmc dev 0 0\0" \
"updatebootb=" \
"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
"lpj=lpj=3981312\0" \
"setenv spl_imgsize;" \
"setenv spl_imgaddr;" \
"setenv spl_addr_tmp;\0" \
+ CONFIG_EXTRA_ENV_ITB \
"fdtaddr=40800000\0" \
/* Falcon mode definitions */
#define CONFIG_SYS_I2C_INIT_BOARD
/* I2C FG */
-#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(2, y4, 1)
-#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(2, y4, 0)
+#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_Y41
+#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_Y40
/* POWER */
#define CONFIG_POWER
#define KEY_PWR_INTERRUPT_REG MAX8997_REG_INT1
#define KEY_PWR_INTERRUPT_MASK (1 << 0)
-#define KEY_VOL_UP_GPIO exynos4_gpio_get(2, x2, 0)
-#define KEY_VOL_DOWN_GPIO exynos4_gpio_get(2, x2, 1)
+#define KEY_VOL_UP_GPIO EXYNOS4_GPIO_X20
+#define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21
#endif /* __ASSEMBLY__ */
/* LCD console */
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
-#define LCD_XRES 720
-#define LCD_YRES 1280
-
#endif /* __CONFIG_H */